Home > Bike Types > Mountain Bike

Galaxy Gearworks blasts off with tubing from Guru & unique builds and details

8 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

At this point, Ryan Johnson has done a little bit of everything. From building lugged bikes in college, welding and fabricating tube chassis, suspension, and roll cages for race cars and rock crawlers, to working for brands like Orbea, Ellsworth, and HIA Velo/Allied, Ryan has built up quite the portfolio of experience. But even so, Galaxy Gearworks sort of happened by chance.

Galaxy Gearworks blasts off with tubing from Guru & unique details

After being enlisted to help with the closing of Guru’s Montreal factory, Ryan ended up with the opportunity to buy a large portion of Guru’s remaining metal tubing, tooling, and other bits. That’s essentially how Galaxy Gearworks got its start. After his wife got a new job in Vermont, the family relocated to the north east, and that is where Ryan has set up shop. At this point, it’s a one man operation, and that’s exactly how Ryan likes it. He plans to build full custom bikes, and while he has four “models” on the website, he says he will build anything that anyone wants – mountain, road, cross, gravel, dirt jumper, or otherwise.

Galaxy Gearworks blasts off with tubing from Guru & unique details Galaxy Gearworks blasts off with tubing from Guru & unique details

This ‘Non’ was shown with the new Trust Performance Message really just as a show piece – which certainly drew plenty of attention. Though it wasn’t long before onlookers noticed the tidy details like the super clean brake hose routing through the frame, right up to the banjo fitting at the rear. Inside there’s a stainless sleeve for the brake line, and it pops out to route along the bottom bracket, but Ryan says he could keep it internal as well.

Galaxy Gearworks blasts off with tubing from Guru & unique details Galaxy Gearworks blasts off with tubing from Guru & unique details

Because of the custom nature of the builds, the Non can be built as a geared frame, dedicated single speed, fully rigid, etc. This particular bike was built for one of the founders of Competitive Cyclist. The frame will clear up to 29 x 2.4″ tires with 430mm chainstays, and the frame will fit a 100-140mm travel fork depending on the geometry.

Galaxy Gearworks blasts off with tubing from Guru & unique details

Galaxy Gearworks blasts off with tubing from Guru & unique details Galaxy Gearworks blasts off with tubing from Guru & unique details Galaxy Gearworks blasts off with tubing from Guru & unique details

Ryan said that this Gemini Dirt Jumper was built for the Builder’s Ball show, but it’s worth showing here since for me it was one of my favorites of the show. A lot of the bike’s details were built out of necessity – Ryan had a group of parts that he wanted to use, so he had to build around them. That meant creating custom end caps and dropouts to use the 15mm DT Swiss RWS axle up front and the older Chris King hubset with a 20mm front and 10 x 135mm rear. Ryan could have easily used modern parts with their corresponding standards, but as he said, he had a very tight budget for this build so he built the bike around the parts he had available. To me, that’s one of the best parts of custom builds – the creativity needed to make things work that you already have, rather than just assembling a bunch of off the shelf parts.

Galaxy Gearworks blasts off with tubing from Guru & unique details Galaxy Gearworks blasts off with tubing from Guru & unique details Galaxy Gearworks blasts off with tubing from Guru & unique details Galaxy Gearworks blasts off with tubing from Guru & unique details

That, and the unique style from the one piece handlebar/stem, segmented fork, and integrated seat post clamp all combine to create one of the most interesting dirt jumpers that I’ve seen in a while.

Galaxy Gearworks blasts off with tubing from Guru & unique details

Want a Galaxy for yourself? Start by sending Ryan a message to get started – and not The Message. That fork is headed back to Trust Performance…

galaxygearworks.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

8 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Marc L
5 years ago

Yeah Ryan! Stoked to see the finished products…

Joe
Joe
5 years ago

Can the Message make a pit stop in South Dakota so I can drool on it and send it a few times?? Pretty please??

Joe Jacobs
5 years ago

Ryan is da’man. Wish he was still in Arkansas.

Dave
Dave
5 years ago

Ryan can weld your ass to your face! Great guy, smart feller, and can do just about anything. Can’t wait to scrape up enough to have him build me one!!

Bmx
Bmx
5 years ago

That cable routing is clean as f…. must have taken a bit of time to get that right. Does it limit the frame to that calipre type though I wonder?

Galaxy Gearworks
5 years ago
Reply to  Bmx

Glad that you can appreciate that detail and the fiddling that went into it. You’re right in your assumption about the compatibility. It is quite “fitted” to the Shimano caliper. The position of the banjo fitting both fore/aft as well as the position of the plane of the face of the banjo boss relative to the caliper mounting bolts is critical. For instance, a Formula caliper would not work due to the fore/aft difference in the banjo fitting.
-Ryan

Galaxy Gearworks
5 years ago
Reply to  Bmx

I’m glad that you can appreciate that little detail and what might’ve went into the execution. You’re right… this hose routing is quite “fitted” to the caliper. Another caliper brand or design would not work if the location for the banjo fitting differs either fore/aft or laterally with respect to the brake mounting bolt centers. For example, I have some spare Formula R1 calipers that would not due to a fore/aft difference.

Keegen Knapp
Keegen Knapp
5 years ago

Everything Ryan touches is done with precision. I’ve been lucky enough to work with him on many projects and he is the most resourceful dude I know!

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.