You’ve seen it on the limited edition Hazzard Racing Orange Bikes. You saw it on Theo Galy’s and Kevin Miquel’s Sunn Kern at EWS Zermatt. The teasers end here. Formula’s first ever coil shock is finally unveiled with its stickers on; the Formula Mod has landed. And, we can now share with you that it does feature swappable CTS valves as you’ve seen on Formula forks. Here’s the need to know.

new formula coil shock titanium spring studio shot special effects

Formula Mod Coil Shock

We first got to see the new Formula Coil Shock at the Winter Bike Connection event in Massa Marittima, Italy. It was bolted to an array of bikes that were largely unsuitable for my 5ft 4″ frame. I did swing a leg over a Mod-rocking Geometron and Sunn Kern but, given the formidable length I was fighting, my experience doesn’t qualify for a “first ride review”. 

mountain biker riding trail brothers maintained track at italy winter bike connection sunn kern big rock drop
Photo by Rupert Fowler – Winter Bike Connection

The Basics

In brief, the Formula Mod is a coil shock for mountain biking. Specifically, enduro mountain biking. Formula offer the Mod in two standard mount sizes and two Trunnion mount sizes.

The gold lever locks the shock out for climbing
  • Standard Sizes: 210mm x 55mm, 230mm x 65mm
  • Trunnion Sizes: 185mm x 55mm, 205mm x 65mm
  • Coils (lbs/in): 300, 350, 400, 450, 500, 550, 600
  • High Flow: 30mm Internal Piston
  • Adjustments: Compression, Rebound, Lockout, Coil Spring Preload, CTS
  • Claimed Weight: 670g (210mm x 55mm, 300 lbs/in)
  • Colors: Ultraviolet or Titanium

formula mod with titanium coil

It features a lockout, compression and rebound adjustments, and you have a choice of six different spring rates. Super. So, what makes it different from any other coil shock on the market?

CTS Valves

The new coil shock from Formula is a modern piece of high-end suspension, with a difference. To understand it, you’ll need to take a step back from what you think you know about suspension adjustments, and think a little differently. 

formula offer 7 cts valve shim stacks fork tuning
Formula offer seven CTS valves for customization of fork damping characteristics – the Mod employs the same system

You’re familiar with high speed compression, low speed compression, high speed rebound and low speed rebound adjustments, right? Great. On my new Fox 38 fork with the GRIP 2 damper, I have a total of 48 adjustments I can make between those four parameters. I’m not about to do the math but, that is a lot of different possibilities! 

Formula-Selva-enduro-suspension-cts valve
Formula Selva Enduro fork: remove the blue compression adjustment knob and you’ll access the CTS valve

Why then, in the race pits, do we see mechanics performing complete tear downs of the pro’s suspension? They have a huge number of adjustments at their disposal. Why can’t they find a setting that works for them on that particular race track? It’s because they need a complete overhaul on the damping. That means a different shim stack.

formula mod coil shock cts valve replacement underneath blue compression knob
On the Formula Mod Coil Shock, the CTS Valve sits underneath the blue compression knob on the piggyback

The shim stack is the array of metal shims within the damper that control the nature of the oil flow through the system. It is the shim stack that dictates the damping properties of the fork or shock.

formula cts valves green gold orange for coil shock

On the Formula Mod Coil Shock, and some Formula forks, the shim stack comes in the form of a CTS Valve, or Compression Tuning System Valve. Formula offer up to seven of these CTS Valves on their forks – for the Mod, they offer just three.

formula cts valves explanation of green gold orange shim stacks
Graphic courtesy of Formula

Compression and rebound is still adjustable, of course. It’s more of a fine tune you’d make at the trail side, after choosing the correct CTS valve for you. At least, that’s how I understand it.

How do you change the Formula Mod CTS Valve?

The guys at Formula show us how to change the CTS Valve in this video tutorial.

How many shocks have you re-shimmed? For me, the answer is one. The only shock, or fork for that matter, I’ve ever re-shimmed is the Formula Mod Coil Shock. My mechanical expertise is basic at best. But, with some simple instructions from Vittorio at Formula, I was able to change the CTS valve on the Formula Mod within around 10 minutes. And, it didn’t require any special tools.

Formula Coil Shock Piggyback

So, we got a little side tracked by the CTS Valves. But, the Formula Mod has a couple of other noteworthy features too. You’ll notice the massive piggyback. Unlike a lot of piggyback shocks, the Formula Mod houses a bladder as opposed to an Internal Floating Piston (IFP). 

formula mod shock large piggyback houses bladder instead of internal floating piston

As the oil flows through the damping circuits, it compresses. That compression is either delivered by the Internal Floating Piston or a bladder. Both mechanisms serve to keep the oil separated from the air, but have different ways of going about it. 

piggyback with damper bladderOn the Formula Mod Coil Shock, the bladder within the piggyback is pressurized to 95 PSI with air (some use Nitrogen). As the oil flows through the damper, it compresses against the air-filled bladder, offering resistance. Here’s why a bladder offers advantages over an IFP.

DVO Topaz t3 air uses piggyback bladder system
The DVO Topaz T3 Air is an example of another shock that uses a bladder in place of an internal floating piston

First up, it doesn’t suffer from stiction. In an IFP, seals introduce stiction into the system, meaning a threshold amount of force is required to get the IFP moving in the first place. You may have chosen a coil shock because it doesn’t suffer from the stiction that an air shock does, so it’s likely you don’t want stiction present in your damper either.

Secondly, the lack of seals also means a lack of friction. Less friction equals less heat generation. Formula chose the bladder system as it is very resistant to over-heating. That’s something you want to avoid as heat can cause the air to expand, and the oil to get thinner, changing the damping properties of the shock significantly.

kevin miquel rides ews zermatt shakedown sunn kern with matterhorn backdrop

Vittorio says the bladder makes the Formula Mod a very reliable shock for long alpine descents.

Bottom-out Bumper

The Formula Mod Coil Shock features a beefy bottom-out bumper. This is more than just a rubber bung. Formula take lessons from their sister company Tech Suspension who specialize in suspension for Trials Motorbikes.

motorcycle grade bottom out bumper on formula mod coil shock

This bottom-out bumper is a motorcycle-derived design that allows optimal management of the last part of the travel. It should allow riders to use the last millimetres of the shock stroke with a smooth feeling, and without an unnecessary bang. 

Pricing & Availability

formula mod coil shock blue special effects background

The Formula Mod Coil Shock is available for pre-order now, with shipping starting from November 2nd. It will set you back £643 / €699 / $829 USD. Mounting hardware is available in the following sizes: 20×8, 22×8, 25×8, 30×8, 35×8, 40×8, 22×10, 25×10, 30×10 (mm).

RideFormula.com

COMMENT HERE: (For best results, log in through Wordpress or your social media account. Anonymous/fake email comments may be unapproved or deleted. ALL first-time commenter's posts are held for moderation. Check our Comment Policy for full details.)

This site uses Akismet to reduce spam. Learn how your comment data is processed.