Home > Bike Types > Mountain Bike

Spotted: Hope Bikes High Pivot Prototype Enduro Bike + New Hope Tech 4 Levers?

6 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

It’s time for the final EWS race of the season, and it just happens to be in Jessie-May’s backyard. After a six year break, the Vittoria Tweed Valley EWS is returning to Scotland’s network of epic trails around Innerleithen. That also means that Jessie-May didn’t have to look far to find some prototypes lurking around the pits.

Hope Bikes High Pivot Prototype Enduro Bike
All photos c. Jessie-May/Bikerumor

Hope is remaining tight lipped about this bike so far, but certain details are pretty obvious. After introducing their new Hb.130 in 2019, their longer travel HB.160 was dropped from the lineup. Could we be looking at the HB.160’s replacement? Based on the number of high pivot enduro bikes we’ve seen lately, it seems likely. While the current HB.130 uses a Horst Link style rear suspension linkage, this one looks to use a concentric pivot around the axle similar to the dw-link Split Pivot or Trek ABP.

Hope Bikes High Pivot Prototype Enduro Bike idler pulley

From the looks of it, it seems to follow the HB formula of a meticulously crafted carbon front end paired with a CNC machined aluminum rear end that’s bonded together at key joints. Only, this time there is an idler pulley mounted to the raised chainstay with its own CNC machined chain guide (of course). It also looks like there’s a flip chip at the upper seat stay pivot—perhaps to modify geometry or allow for mullet 27.5/29″ and 29/29″ wheel set ups?

Hope Bikes High Pivot Prototype Enduro Bike suspension linkage Hope Bikes High Pivot Prototype Enduro Bike downtube storage

Ahead of the Ohlins coil shock, there is a plate that looks like it could be used for internal downtube storage. It looks like there are two threaded holes for a traditional water bottle mount, but there is also a larger bolt at the bottom which could be used to remove the entire plate. Hope Bikes High Pivot Prototype Enduro Bike

This could just be an employee’s test rig, though it does look pretty polished for a prototype. Perhaps a new bike is imminent?

Hope Tech 4 brake lever

Elsewhere in the Hope pit, Jessie-May caught sight of what looks to be a new Tech 4 brake lever. It was paired with the same Tech 3 calipers, and as usual is fully machined in house.

Hope tech 4 brake lever prototype

The lever itself is longer, and runs on a bearing instead of a bushing—all of which points to a brake that may require less hand strength to operate. It also features tool-free throw and reach adjust.

More when we have it.

hopetech.com

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

6 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Tim
Tim
2 years ago

Hope brake are beautifully machined and extremely reliable with great customer service… but the stopping power has always underwhelmed me. If they could throw power into that equation, they’d have me, but I don’t see that happening…

NigelH
NigelH
2 years ago
Reply to  Tim

The new Tech4 levers are awaited and add 30% more power reportedly

bmx
bmx
2 years ago

agree totally, they aren’t in the same game as newer development in brakes. They’re difficult to operate with one finger as is required in modern long dissent enduro riding. The design hasn’t changed drastically in around 15 years

Kevin
Kevin
2 years ago

If you look closely, It appears the chainstay is Unidirectional Carbon Fiber rather than Aluminum. Very Interesting

MaraudingWalrus
2 years ago

I’m not sure I buy that entirely – if you zoom in enough you can clearly see CNC machining marks on portions of it. I can’t tell from the pictures what the large, straight portions of the stays are so that could be carbon – I grant you there are a few angles where the large straight portions of the stays have that shiny UD fiber-y vibe. But it’s clear that at least portions of it are very clearly aluminum.

David Harris
David Harris
2 years ago

Uni tubes bonded to billet pcs

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.