Home > Bike Types > Mountain Bike

Beast Riser & Flat Bar 2.0 reinforced light carbon MTB bars clamp lightweight cockpits

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars
2 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Beast Components takes their already “extremely light and ultra stable” mountain bike handlebars and given them a Riser & Flat Bar 2.0 update to better deal with lightweight components. As component makers have machined away more & more material to shed weight from their own parts, carbon bars have taken the brunt of more uneven clamping forces. So, Beast dove deep into analyzing the impacts of those less uniform forces, and is reinforcing all of their MTB bars to greatly improve safety at the cost of just a few grams…

Beast Flat & Riser 2.0 lightweight reinforced carbon MTB bars

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars, in-house testing
all photos c. Beast Components

Riding light carbon MTB bars in technical terrain is often a hotly-debated topic of discussion, mainly because enough riders have seen anecdotal evidence of someone having sheared a carbon bar off either at the stem or brake lever. Beast understands the reluctance, but being carbon engineers they set about solving the problem, not just talking about it.

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars, cockpit

So what they did was identify the problem and its effects, model the real forces, reinforce their bar layups, and test to be sure their new design was safer.

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars, clamp types

The issue is that many ultralight brake & shifter clamps (including those from industry benchmarks like Shimano & SRAM) use non-round designs or machined-out clamps that distribute pressure unevenly on the bar. Contact areas a reduced so forces are increased. Even more conventional, lower-end clamps can often be irregular in shape or poorly formed, resulting in uneven pinching at the bar.

And carbon fibers don’t like that.

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars, FEA clamp forces
FEA of SRAM Code (left) & Shimano XTR (right) brakes at 4Nm (deformation 10x magnified in the details)

So Beast worked with Realize Engineering to use finite element analysis do get a closer look at what is really happening both outside of the bar, and inside its inner layup layers. Beast says they were pretty shocked actually at how the recommended clamping ranges created peak forces on the bars.

Both SRAM and Shimano brakes already exhibit local pinching at just 1.2Nm of tightening torque of 1.2Nm to the point that Beast anticipates reduced bar service life. And by 4Nm it is much more significant. At that point the SRAM clamp hasn’t broken any fibers, but the Shimano one has.

So should you be worried?

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars, crimped bar damage

Beast doesn’t come out and say it… But to us, it sounds like if you have a light carbon bar from any manufacturer and you have any lightweight brake setup, it’s probably worth taking a closer look and being sure to break out the torque wrench. Pop the brakes off to check that there isn’t any visible damage in the clamping area. And use minimal torque when clamping them back. It seems many bar makers recommend a max 1.5Nm for lightweight clamp designs.

Tech details – What’s new & How the v2.0 bars are better!

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars, ends

To solve the pinching problem while still producing a lightweight carbon bar, Beast redesigned the elaborate fiber layup at the clamping area and now includes a new high-strength reinforcing polyester mesh. Designed to better distribute sharp clamping forces, it also is less slippery, reducing the chance of clamp rotation or wear if the clamp does slip.

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars

The new safety buffer adds about 20g vs. the older bars, but greatly increases safety and ultimate fatigue strength. It also allows for 2x higher clamping forces without damage, up to 3Nm for unfavorable clamp designs, and 6Nm for more even clamp layouts.

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight carbon reinforced mountain bike handlebars, testing

The whole process also convinced Beast to use a much more stringent & realistic in-house multi-load testing protocol that now includes repeated brake clamp tightening & twisting before fatigue testing.

Beast Riser & Flat v2.0 lightweight carbon bars – Options, pricing & availability

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars, SRAM matchmaker

You can see the slightly darker matte black polyester mesh reinforcing in all of the new version 2.0 mountain bike bars. It’s not the same as the UD carbon reinforcing already at the stem clamping areas.

Once your brakes, shifters & grips are installed it’s a pretty subtle difference, and Beast’s UD or SQ weave finishes still shine through. You can even still get their signature red or blue colored resin over top if you want (for an extra 60-80€ and 3g more).

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars, range detail

Four different rise options are available for the German-made 8° backsweep bars, with varying width, upsweep & clamp options – and all sell for 220€ in UD black, 240€ in SQ weave black, or 300€ in color.

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars, range

The Flatbar 2.0 is 31.8 with a mini 5mm rise and 74 or 78cm widths (~172g UD, 74cm), and rated for XC, Trail, or Enduro.

All 2.0 Riser Bars are available in 31.8 or 35mm clamps, and are rated for XC all the way up to DH. Riser bar 15 2.0 gets 15mm rise, 5° upsweep, and either 74cm width (31.8) or 80cm width (35) (~167g UD, 74cm). Riser bar 25 2.0 gets 25mm rise, 5° upsweep, and 80cm width in either clamp diameter (~202g UD, 31.8). Riser bar 35 2.0 gets 35mm rise, 5° upsweep, and 80cm width in either clamp diameter (~217g UD, 31.8).

Beast MTB Flatbar 2.0 Riser Bars 2.0, lightweight reinforced carbon mountain bike handlebars

You can pre-order any of the version 2.0 bars now, with deliveries for the new bars in UD black from July 1st, and colored and SQ weave finishes from September 1. The slightly lighter original bars without brake clamp reinforcing will not be produced after the end of this month.

Beast-Components.de

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

2 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
T P
T P
2 years ago

Nice. Shimano and SRAM are breaking our handlebars. Yay!

blahblah1233445
2 years ago
Reply to  T P

More like the Beast bars are (were?) weak. I saw it in a breaking test done by one magazine and it did not do very well compared to others.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.