Home > Event Coverage > Eurobike

EB15: Trickstuff makes world’s lightest star nut! Plus lighter, more powerful brake levers & more nifty upgrades

19 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2016-Trickstuff-Deckele-ultra-lightweight-starnut02

At first glance, the new Trickstuff Deckele may not seem like much, but it’s the world’s lightest star nut at just 12g. That, and it provides the perfect item for pulling your stem and spacers tight when using a carbon steerer tube because it is not, in fact, anything like a traditional star nut…

2016-Trickstuff-Deckele-ultra-lightweight-starnut01

The center bolt is there only to hold the top cap, which is included and necessary because it’s designed for the thinner than normal bolt. To secure the Deckele inside the steerer, the other bolt pulls up on a wedge that evenly expands the entire body of the part to apply full, even pressure all the way around the inside of the steerer tube. They say it shouldn’t slip like typical expansion plugs used on carbon steerers can.

2016-Trickstuff-Deckele-ultra-lightweight-starnut03

Another nice feature is that it can run wires and hoses right past it, with plenty of roomy holes for multiple lines to slip past. It fits inside diameters from 23.3mm up to almost 25mm.

2016-Trickstuff-Ghandi-seatpost-binder-clamp01

The new Gandhi seatpost collar puts the bolt as close to the post as possible, which prevents uneven pressure and binding. It’s also perfectly round on the inside, and requires less torque, which is good for dropper posts since it won’t have to be tightened so much that it binds the telescoping element (yes, that can happen).

2016-Trickstuff-Ghandi-seatpost-binder-clamp02

It, too, is very light.

2016-Trickstuff-Beta-kevlar-hydraulic-brake-hose01

New Beta brake hose made from Kevlar is just 17g per meter but will handle up to 630 bar, so it won’t expand under braking. Compared to their Goodridge hose, it’ll save about 40-50g per bike.

2016-Trickstuff-Friendship-shimano-to-sram-handlebar-adapter01

Friendship adapter allows you to put Shimano shifters with a SRAM brake, opposite of what their Matshi does.

2016-Trickstuff-Direttisima-lightweight-powerful-disc-brake-lever01

The biggest item at their booth was the all-new Direttissima brake lever. The name is derived from Italian and means “most direct route.” They say it has the weight of an XTR trail brake, but provides 10% more power than Shimano Saints.

2016-Trickstuff-Direttisima-lightweight-powerful-disc-brake-lever05

2016-Trickstuff-Direttisima-lightweight-powerful-disc-brake-lever04

Both the lever and the piston pushrod move on bearings rather than bushings. It’s a mineral oil system.

2016-Trickstuff-Direttisima-lightweight-powerful-disc-brake-lever03

The lever is totally new, but the caliper will get a 1mm larger diameter piston. For two piston brakes, it’ll bump to 17mm, and the four pot goes to 13 and 17. Available end of this year. €800 for both wheels in any colors you want.

Trickstuff.de

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

19 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Jahnab
Jahnab
8 years ago

The Star nut is perfect for putting The Plug III in carbon steerers

Myke
Myke
8 years ago

Looks really nice. Fairly priced but still out reach for most on the brakes

klarf
klarf
8 years ago

It’s not the lightest starnuts on the world :
http://www.extralite.com/Products/UltraStar%203.htm

It’s work with alloy or carbon fork steer tube.

anonymous
anonymous
8 years ago

Not a star nut, and I have a 6.8g J&L expander plug I bought for $13. If your expander plug is slipping, you’re using way too much preload on the headset.

bosbik
bosbik
8 years ago

is that new starnut specific for carbon steerers or can it be used for alloy too?

pmurf
pmurf
8 years ago

I’ve got the MCFK expander on my bike. It weighs 11.7g, and has never budged. Furthermore, Tune and Extralite make models that are even less. All of these use a more traditional compression cam design and aren’t technically “starnuts,” but neither is the Deckele. Why make claims that aren’t true?

Very cool design though!

Stravarious
Stravarious
8 years ago

@pmurf, You are a true weight weenie, quibbling about 0.3 grams or 1/100 of an ounce. That is about the same weight of a fly going into your mouth.

Dave
Dave
8 years ago

Agree, it’s not a starnut, it’s a novel design for an expander plug. I see no reason it couldn’t be used with steel or Al steerers since regular expanders also work with them if the OD is suitable.

Kristi Benedict
Admin
8 years ago

Bosbik – it’s for any type of steerer tube material – carbon, alloy, steel, whatever.

pfs
pfs
8 years ago

It looks like it would put a point load at all three od the wedge pieces. Not ideal for carbon… Also, I thought that part of the expansion plugs job aside from adjusting the headset was to provide extra support to the steerer to deal with the clamping forces of the stem. I dont see this as serving that duty as well as a traditional plug. But afterall, they are your teeth and you can always buy new ones!

pmurf
pmurf
8 years ago

@Stravarious I ride a steel frame…maybe I’m trying to make up for that 🙂 My quibble isn’t over the 0.3 grams, it’s over the “worlds lightest” claim. It just bothers me that they chose to make that the cornerstone of their pitch. The fact that it works on multiple materials AND lets cabling pass through all at 12g is amazing. Just lead with that.

Derek
Derek
8 years ago

@pfs It’s not the silver wedge piece that contacts the steerer. The wedge piece only expands the black piece (it’s not a complete circle) to grab hold of the steerer.

Klaus Liedler
8 years ago

Hi to the world, this is Trickstuff speaking.

1. Concerning our expander system: It is 12 grams INCLUDING the top cap and the tension bolt! The total weight of the tune GumGum system is 15,44 grams. The Extralite system stresses the carbon sterer much more because of the very small power transfer surface. The tune system might not stand the pull tension of the tension bolt in all cases.

2. The piston sizes of our brake calipers are as follows:
2 piston caliper: 2 x 22 mm
4 piston caliper: 2 x (14 + 17) mm – which is the same piston area as for the 2 piston caliper and, thus, the same braking power at same hand force.
The 4 piston caliper has a slightly harder feel and a smaller pad clearance (2 piston: 0.2mm per side; 4 piston: 0,15mm per side).

Klaus Liedler
8 years ago

Sorry, I forgot: our “Deckele” system fits for both aluminum AND carbon steerers!

jeff
jeff
8 years ago

Man, I worry so much about the weight of my star nuts, gotta have these, with all those weight savings, I’ll surely be the first atop every climb.

dereksmalls
dereksmalls
8 years ago

When will the expander be available Klaus and estimated cost?

Mecanico do Paladar
8 years ago

Those who don´t count grams, will count kilograms!

Cheers to the Trickstuff guys for bringing us new stuff!

pmurf
pmurf
8 years ago

@Klaus, thanks for hopping on and clarifying. That is indeed impressive – I rescind my critisism.

Gerald
Gerald
5 years ago

Bummer there is no 27.2 option for the Gandhi..i hope there will be one in the near future

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.