Home > Event Coverage > Eurobike

EB16: Chris King spins out Threadfit 30 Bottom Brackets for RaceFace Cinch and e*thirteen cranks

19 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

chris-king-threadfit-30-bottom-bracket-threaded-bb30-mm-spindleeurobike-day-3-4-19

When it comes to newer standards, once Chris King offers it, it’s pretty safe to assume it has some staying power. Threaded bottom brackets for 30mm spindles have been around for awhile, but not with a compatible fit from Chris King. That’s about to change, and it should make a lot of riders happy. Often due to their smaller diameter bearings, many threaded 30mm bottom brackets seem to suffer in the durability department. We can’t comment on the durability of the new CK Threadfit 30 units since they aren’t available yet, but if you should have a problem that 5 year warranty should help…

chris-king-threadfit-30-bottom-bracket-threaded-bb30-mm-spindleeurobike-day-3-4-18

The Threadfit 30 BB concept is pretty simple – it allows the use of a 30mm crank spindle in a BSA threaded frame. Historically, most threaded outboard bearing bottom brackets have been sized to fit 24mm spindles, though a recent surge in 30mm spindles has caused the need for Threadfit 30 bottom brackets. Chris King’s new Threadfit 30 BBs are meant for 30mm mountain bike spindles and will work with most RaceFace Cinch and e*thirteen cranksets.

chris-king-threadfit-30-bottom-bracket-threaded-bb30-mm-spindleeurobike-day-3-4-17

To be offered in both stainless steel (91g) and ceramic (86g) bearings, each bottom bracket includes a 5 year warranty on the assembly and bearings on defects in materials or workmanship. Pricing and availability TBA.

chrisking.com

 

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

19 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Birdman
Birdman
7 years ago

So does this mean T47 is dead?

myke2241
myke2241
7 years ago
Reply to  Birdman

Wondering the same thing!

JNH
JNH
7 years ago
Reply to  Birdman

Was it ever alive? I don’t remember seeing a single bike with it except a few custom builds.

ACM
ACM
7 years ago
Reply to  JNH

I think it was stillborn…

TimB
TimB
7 years ago
Reply to  Birdman

T47 is designed for BB30, BB30A, PF30 and that 386 thingy.
This is a threaded bb for BSA frames to allow the fitment of a compatible 30mm spindle crank

bearcol
bearcol
7 years ago

Knowing how expensive BB’s can be and how little difference there is in performance from entry level to top end really makes me appreciate my 24mm spindle cranks and shimano xt BB’s I can find for 18 bucks. The really funny thing is 24mm bb’s last longer than 30mm because the bearings are larger.

Veganpotter
Veganpotter
7 years ago
Reply to  bearcol

The differences in drag are actually enormous, same goes for durability. The bearings for 24mm spindles also aren’t always bigger;). Also, Shimano’s highest and BBs have significantly more drag that SRAM’s cheapest outboard bearings. Just check out Friction Facts third party data

bearcol
bearcol
7 years ago
Reply to  Veganpotter

The friction facts BB report I read contradicts what you are saying. I would post the their bb test but BR doesn’t care for links it seems. Anyone can do a quick search if they care to. After reading that report I’ll never again spend money on high end BB’s.

You’re right in that shimano’s have more drag. Friction facts showed that robust seals and thicker grease create the lions share of drag in any BB. Robust seals and heavy grease are worth extra drag for MTB IMO. I’ve owned gsp, hope, king, raceface, fsa…… I’ll take the ones with the most seal drag and heaviest grease every time. I repack my BB’s with marine grease which adds friction for sure. That said, anyone wanting super low drag only needs to modify the seals and replace the grease with oil and you’ll have lower drag than the most expensive BB on the market regardless of diameter. 30mm does nothing to reduce drag according to friction facts.

boom
boom
7 years ago

Any word on CK offering the BB86/92 press-fit standard for 30mm spindles in the future?

Nick
Nick
7 years ago
Reply to  boom

this is highly unlikely due to the nature of this BB. the only ones available at this stage are called a “4130” from Rotor or Enduro. its basically a bb30 bearing (6806 if i remember correctly) with the outside of the bearing race machined down .5mm all the way around with a lip and this sit directly in the frame. all reports i have read on them say lifespan is pretty average.

Heffe
Heffe
7 years ago

What happened to the T47?

dizzy
dizzy
7 years ago

I’ve had a Buzzworks version of this on one of my bike for about 15 months now and haven’t touched it since the first install. It’s been smooth for the duration as have my PF30 King BB’s. One thing to note is that on a metal bike with Di2, there’s barely enough room to sneak a wire between the 30mm BB spindle and the ID of the shell. That alone is enough of a reason so spec a T47 shell if you’re getting a metal bike and are using cranks with a 30mm spindle.

Doug M.
7 years ago

T47 is a different animal; bigger shell so as to cut threads in a metal PF30 frame. This is a BSA threaded BB (i.e. the old standard we all like) for 30mm spindle cranks. Thus the tiny bearings.

ss^2
ss^2
7 years ago

This is a bit misleading, as most other bottom brackets that allow 30mm spindles use the same bearing size as BB30 and PF30 systems (6806)–this is not a ‘tiny’ bearing–bearing size is not compromised due to the requirement to thread into a 24mm BB shell. In threaded systems, the bearings are placed further apart than BB30 and PF30 designs, which likely should make the bearings last longer…not shorter. The only downside is the limited space in the bottom bracket shell to fit an internal dust/dirt shield and wires/cables.

Jason Miles
7 years ago

What tool standard does this BB use?

SB
SB
7 years ago

Bike Rumoer, a little research goes a long way: every “BSA 30” bottom bracket I’ve ever seen uses a 6806 bearing (or, in the case of FSA, a 6806 that’s a half millimetre narrower). They don’t wear out more rapidly because the bearings are somehow smaller (and anyway…ever torn down a DA 9k BB?!), they wear out quicker because the bearings and/or seals are garbage.

Greg
Greg
7 years ago

two questions:
What’s the OD of the bearing itself, out of the cup?
Does this use the plastic ID “top hat” like their 24mm bottom brackets? Hope so.

thedonnydino
thedonnydino
7 years ago

T47 is alive and kicking!

White Industries and Enduro both offering fitments.

I have a ceramic Enduro T47 bottom bracket on my bike and it is phenomenal! Spins beautifully, and have a big, fat titanium bottom bracket junction so the bike is stiff and snappy to boot!

Unfortunately, whilst Chris King helped develop the standard, they have restricted the availability of the bottom bracket to their cielo bikes only for now. I don’t know why, but it’s extremely frustrating, as my bike has CK everything else, with exception to the bottom bracket!

Cheese
Cheese
7 years ago

“restricted the availability of the bottom bracket to their Cielo bikes only for now” Huh?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.