Home > Bike Types > Cyclocross

EB17: Entire Zipp NSW, Firecrest lineup goes tubeless, new 303 650B gravel wheels & actual weights!

2018 Zipp NSW tubeless ready wheels are available in 202 303 4040 and 808 sizes for disc brakes
14 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Finally, Zipp is fully committed to Road Tubeless. What started last year with the 303 Firecrest has made its way across their entire NSW and Firecrest lines, with the 202, 303, 404 and 808 depths all getting tubeless ready disc brake wheelset options.

In our estimation, it was a matter of testing the waters and production cycle realities that kept them from rolling this out sooner, but they’re touting all the reasons why tubeless is right for road that we’ve known for so long…namely:

  • lower tire pressure means a bigger contact patch, which improves cornering grip. So, you’re faster in the corners.
  • enhanced comfort, because lower pressure has more give.
  • improved rolling resistance, which means you’re faster on the straightaways, too.
  • less chance of pinch flat

2018 Zipp NSW tubeless ready wheels are available in 202 303 4040 and 808 sizes for disc brakes

Here’s the explanation for all that: They say with tubeless, the tendency is to run larger tires, which improves (decreases) rolling resistance because there’s less deformation (hysteresis), which works because there’s less energy lost to heat.

With tubeless you also lose the friction between tire and tube, so it can react faster, and there’s less material that has to deform, so less energy lost. AKA, more efficient.

Our rendering of the tube-type versus tubeless rim profiles shown in the presentation, a graphic not included in our digital materials…so we recreated it from memory.

They also claim that it’s easy to set up…which they admit some folks might find hard to believe. It depends on how familiar you are with mounting tires, but since they make both the wheel and the tire, they can create a system that works well together. But not everyone’s going to run Zipp tires, particularly when you move outside of pure road. Which means it comes down to having a really good internal channel design that helps any tire seat quickly and securely. So, there’s a deep center channel so it’s easier to get the tires on, and a proper bead seat with bump to keep the tire in place once inflated…and help it lock in and seal quickly. They say you’re likely able to set it up with a floor pump, but again, this will depend on the tires used.

There’s also a new disc-brake specific rim shape that’s flatter on the sidewalls, coming in much wider at the top (4mm wider than tube-type 202 and 303, and 3mm wider for 404/808), which is what optimizes them for wider 25-28mm tires (the original Firecrest from 2010 was designed for 23-25mm wide tires).

FYI, the typical road wheel tube-type official ETRTO standard for wheels is 621.95mm. Within that recommendation is a 621.5mm for Road Tubeless. That teensy reduction in bead seat heigh is to help ease installation.

2018 ZIPP NSW TUBELESS DISC BRAKE WHEELS

2018 Zipp NSW tubeless ready wheels are available in 202 303 4040 and 808 sizes for disc brakes

NSW (stands for Nest Speed Weaponry) wheels are their top of the line offerings, which have thus far only been rim brake, tube type wheels. Now, they get the disc brake tubeless option for 202, 303, 404, and 808. Rim depths are 32mm, 45mm, 58mm, and 82mm, respectively (same as the rim brake models).

They have a 21mm internal width for 202 & 303 (28mm tire optimized), and 19mm for 404 & 808 (25mm optimized tire). They say they prototyped several widths and shapes to offer the best application specific tire sizes and this was the result.

2018 Zipp NSW tubeless ready wheels are available in 202 303 4040 and 808 sizes for disc brakes

They’re built with 24/24 spoke counts on Center Lock Cognition hubs. Cognition Disc Hubset was released earlier this year. It reduces drag by incorporating their axial clutch, which completely disengages during coasting to reduce drag. They use J-bend spokes for convenient repairs and replacements. They use a tool-free end cap system, making it easy to switch between QR and thru axles, and they come with all common end caps in the box. 36 POE, available with XDR, HG (11-speed SRAM/Shimano) and Campagnolo freehub bodies.

2018 Zipp NSW tubeless ready wheels are available in 202 303 4040 and 808 sizes for disc brakes

ImPress Graphics mean no bulky decals to hide the dimples, the logos are printed on the rims. The NSW rims get their sawtooth dimple pattern, similar in concept to the wild 454 NSW rims, but less dramatic. They say the design improves air flow and vortex shedding at all yaw angles, reducing drag in real world riding conditions.

2018 Firecrest Tubeless Disc Brake Wheels

2018 Zipp Firecrest wheels are all tubeless ready

The next level down is the Firecrest series, which already had the 303 as a tubeless ready, disc brake wheel. Now, they’ll have the full line of 202, 303, 404 and 808 available in this format. Widths and most specs are the same as the NSW line with a few exceptions. The rims get a different mold and molding process, though, keeping the NSW lighter and more aero optimized.

2018 Zipp Firecrest wheels are all tubeless ready

2018 Zipp Firecrest wheels are all tubeless ready

The Firecrest rims use the ABLC dimple pattern, which they’ve used for years, and the logos are decals.

2018 Zipp Firecrest wheels are all tubeless ready

These use 6-bolt rotor interfaces on the 77/177 hubset with straight pull spokes.
Available October 2017, $2,500 up to 404, $2,800 for 808. Rims come pre-taped, with valve stems in the package. All of the wheels shown here replace any prior disc brake wheels offered, but standard tube-type rim brake wheels carry over unchanged for now.

303 FIRECREST 650B TUBELESS

2018 Zipp 303 Firecrest 650B

The gravel scene hasn’t escaped them, but with the traditional wheels designed around road-appropriate tire volumes, they wanted something ready for bigger gravel tires. (That said, these actually have the same rim profile and width as the 700c models).

2018 Zipp 303 Firecrest 650B

While there are plenty of 27.5” mountain bike rims that could work for 650B road “plus”, but they thought they could do better by building an optimized wheel specific to the category.

2018 Zipp 303 Firecrest 650B

The new Zipp 303 Firecrest 650B is a purpose built aero clincher. Why do aerodynamics matter? Well, when you’re racing 200 miles in events like Dirty Kanza, every gain helps reduce the suffering and increase the speed.

2018 Zipp 303 Firecrest 650B

It has the same 21mm internal width, which fits from 25mm up to 62mm tires, but optimized around 45-54mm wide tires. The rims measures 28.9mm at its max outer width. and is 45mm deep. Retail is $2,500 / €2,600 / £2,300.

2018 Zipp 303 Firecrest wheels actual weights

Actual weights for the Firecrest 303 650B is 728g (F) and 805g (R). Rest of the new wheels’ weights are below.

They say you’ll also find this on more regular road bikes as manufacturers start offering smaller road bikes, and Canyon is said to be spec’ing them for 2018.

ACTUAL WEIGHTS

2018 Zipp 202 NSW wheels actual weights

NSW 202 is 699g (F) and 793g (R).

2018 Zipp 303 NSW wheels actual weights

NSW 303 is 736g (F) and 839g (R).

2018 Zipp 404 NSW wheels actual weights

NSW 404 is 767g (F) and 867g (R).

2018 Zipp 808 NSW wheels actual weights

NSW 202 is 869g (F) and 960g (R).

2018 Zipp 202 Firecrest wheels actual weights

Firecrest 202 is 728g (F) and 893g (R).

2018 Zipp 404 Firecrest wheels actual weights

Firecrest 404 is 824g (F) and 945g (R).

2018 Zipp 808 Firecrest wheels actual weights

Firecrest 808 is 904g (F) and 1,025 (R).

Zipp.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

14 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Bud McAninch
Bud McAninch
6 years ago

So a 303 in 700c is designed for a 28mm tire but the 303 in 650b is designed for 42mm tires. How is it that you can optimize the same width rim for for two different tire widths just by changing bsd?

tyler
6 years ago

not sure about rolling resistance. butyl-coated tires have shown to be slower than clincher + latex. but whatever sells wheels i guess.

Rider X
6 years ago
Reply to  tyler

Really depends on the brand and generation of tubeless tire you are testing. Early road tubeless rolled well, but were behind clincher+latex. Recent generation of road tubeless have made the difference negligible. Plus what is a apple-to-apple comparison? The sealant makes road tubeless much more puncture resistant, much more so than the top clincher + latex. If you look for a regular clincher with similar puncture resistance, tubeless will come out on top by a large margin.

Robin
Robin
6 years ago
Reply to  tyler

To to the Bicycle Rolling Resistance website and check out the tests they’ve done. So far the tested tire with the lowest rolling resistance is a tubeless tire. While, you’re the check out the other tubeless tire that are in the top 10.

Robin
Robin
6 years ago
Reply to  Robin

*Go to…..

jasonmiles31
6 years ago

I am interested how a 28.9mm wide rim could be aero optimized for a tire that 45-54mm wide. That is like a 60% difference in width. At the same time rims that are optimized for 23-25 tire are over 26mm wide. This does not add up to me. I would love it if Zipp proved me wrong and put some big tires in the wind tunnel. Big tires for sure have lower RR but how much aero drag are you adding on?

Antoine
Antoine
6 years ago
Reply to  jasonmiles31

bigger doest not mean better. Actually the best tire for RR are around 28mm bigger tire are usually slower. it’s an optimum, not a bigger is better case. On top of that with same technology you’ll find very small difference around the optimum (25-28-30). Finally the best tire for RR is still a 23, vittoria TLR.

jasonmiles31
6 years ago
Reply to  Antoine

Sorry I should have qualified, depends on the surface. For a Adventure/Gravel bike there is no way a 28 will have lower rolling resistance over all of the surfaces you will cover. When I hit gravel I want as big a possible. For road use, I think you’re right a 28 might be optimal for RR.

Syjenkins
Syjenkins
6 years ago

Entire lineup is now tubeless*

*disc only

donutsaf
6 years ago

stoked about 650b til i saw 21mm width

Rider C
Rider C
6 years ago
Reply to  donutsaf

Agreed – 47c on a 21mm?

Greg
Greg
6 years ago

Yay centerlock! Yay tubeless! J-bend spokes on the higher end wheels? Weird.
And all of them are quite porky. Roval CLX32 disc (also tubeless) is quoted at 1350g, realistically 1400. 150g lighter than the 303NSW, cheaper, ceramic bearings…

Rider C
Rider C
6 years ago
Reply to  Greg

J-bend is awesome – do you know what shop has a straight gauge j-bend spoke? Hopefully ALL of them! That means when you live where gravel roads actually are then the chances of getting your wheel fixed quickly are pretty good.

The Roval has a 20.7mm internal – even worse..

Mic
Mic
6 years ago

Can these also be used w inner tubes in case of flats? Sealant often sucks imo in my mtb experience evem when it works short term the holes crack, widen, sealant cracks, dries, shrinks long term and tires shot….and if we still ride rim brakes but might want new wheels next year are we sol?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.