Home > Bike Types > Mountain Bike

Flat-resistant BlackBird Send aluminum rims & wheels from Ibis’ new component brand ready to soar

4 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Ready to go full send? What if you could gain reliable flat protection without resorting to pricey carbon rims or heavy tire inserts? That was the goal of the newest aluminum wheels from Ibis—which also happens to coincide with the launch of their all-new component brand.

BlackBird Send aluminum rims shredding LEar Miller
All outdoor imagery c. @LearMiller

BlackBird Send aluminum rims

Continuing with the ‘bird, but make it rad’ naming theme, Ibis will now be marketing their own components under the Blackbird brand. Or, BLK BRD as it’s written on the rims. Why the name change? We’ve seen this from a number of companies, and it boils down to coming up with a cool product name that someone who doesn’t own an Ibis bike would still want to run on something of a different brand. It should help that Ibis nailed the branding and the look here with minimal branding and great design.

BlackBird Send aluminum rims profile

It should also help that the new Blackbird Send rims seem to offer a very unique and beneficial take on the aluminum rim. If you look at the rim channel profile above, it would be easy to mistake that for a carbon rim thanks to the wide bead wall.

BlackBird Send aluminum rims 1 2 profile

But these aren’t carbon, they’re made from 6061 aluminum. Instead, they use an extrusion with a hollow box-section profile for the bead wall. That’s what makes that wide profile, and it’s why the Blackbird Send rims are much less likely to cause a pinch-flat. The wide bead wall doesn’t slice through the tire sidewall when the tire is compressed on a big hit like other rims.

According to Ibis, their EWS team has been running the Send 1 up front and the Send 2 out back for the past two years. That’s four different racers with multiple stage wins, three podiums, and a Swedish National Enduro Championship, all with only one flat on race day. That seems pretty incredible for aluminum rims. Note that the team ran the Send II on the back which gains a pair of ribs directly under the bead seat to make a stronger rim. This adds 45g to each rim, but Ibis says it’s lighter than the tire insert you would need to protect the rim otherwise. Without that extra rib, the Send 1 is apparently almost the same weight as the previous S35 aluminum rim, even with the hollow bead wall.

It seems that Ibis is positioning the Send 1 as the front rim and Send 2 as the rear, though you could probably double up on either depending on your needs.

BlackBird Send aluminum rims identification
Each rim is identifiable by the number of stripes at the valve hole.

 

The rims are also properly wide at 35mm inner width and 44mm outer width. That’s really no surprise—Ibis has always been at the forefront of the wider-is-better rim concept. The Send rims are essentially an update of their aluminum S35 rims, and continue using Stan’s Bead Socket Technology rim design. The end result is an aluminum rim that weighs 543-590g for 27.5″ or 565-625g for a 29″.

Blackbird Send Pricing & Specs

BlackBird Send aluminum rims and wheels spec

The Blackbird Send I and II will be available as a rim-only, or as complete wheels with Ibis’ Logo hubs and Sapim D-Light J-bend spokes. Both will be offered in 27.5 or 29″ sizes, while complete wheels will be Boost-only. The best part may be the $529 price tag for a wheelset!

BlackBird Send aluminum wheels on Ibis MTB

BlackBird Send aluminum rim specs

Availability

Aftermarket rims will be available starting today. Send wheels will begin shipping on Ibis bikes starting in mid-February, and aftermarket wheel availability is still TBD.

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

4 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Greg
Greg
2 years ago

Where are the rims manufactured?

Conal
Conal
2 years ago
Reply to  Greg

Santa’s workshop

Greg
Greg
2 years ago
Reply to  Conal

At least it is in-housed in our head there

Pat
Pat
1 year ago
Reply to  Greg

Most likely Taiwan as “they use Stan’s bead socket technology”.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.