Home > Bike Types > Mountain Bike

Found: Vasttech’s ultra-short, single-pivot suspension design

Veli vasttech full suspension mountain bike
7 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

If you want a really, really simple rear suspension, look no further than the Veli, a new mountain bike showcasing Vasttech’s Suspension System. Using two oversized pivots about halfway back on the chainstays, they deliver a short arc of rear wheel travel without the complexity of concentric pivot-and-bottom-bracket designs.

They say the design provides optimal chain growth during the part of travel where you’re likely pedaling, then minimizes it deeper in the travel when you’re likely descending rough terrain and don’t want any pedal kickback.

Veli vasttech full suspension mountain bike shown from rear angle

OK, but what’s “optimal chain growth”? It’s basically anti-squat, and when the bike is sagged and sitting in 20-35% of its travel, they say it has 38.7% more chain growth and related anti-squat than a comparable linkage driven single-pivot design.

Veli vasttech full suspension mountain bike axle path diagram

In other words, it means that your pedaling forces are pulling the chain, which is trying to pull the rear axle downward into the ground. This would maximize traction, but (my assessment) also very likely to reduce small bump compliance. So, traction first in the first third of travel.

After that, they say chain growth is minimal or non-existant.

Veli vasttech mountain bike impact angle diagram showing suspension articulation

Another benefit is the angle of the axle path when it hits a bump. Because the axle sits below the main pivot, it first moves up and back, closer to the direction of impact as you roll forward. They say this is far more efficient because it’s not trying to absorb a horizontal impact in a purely vertical fashion.

Veli vasttech full suspension mountain bike closeup of rear axle and main pivot

The other claimed benefit is reduced unsprung mass. The more “stuff” there is between the axle and the shock, the more inertia there is before things get moving, slowing down a suspension’s response to inputs. Reducing that mass lets it react quicker, improving small bump compliance in particular.

Veli bike geometry chart

While the bike is new, it’s worth noting that the suspension demo videos on Vasttech’s website were uploaded four years ago. Geo chart above, and other pertinent specs are 116mm rear travel with 120mm forks, external routing for everything, and low leverage ratio (.2:1) long stroke shocks for low pressure performance.

More tech specs at Veli.bike and Vasstech.design.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

7 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Jorge
Jorge
1 year ago

Veli is another bike brand: a Portuguese 20” mini velo bikes. And very cool. This guys should do their research before naming the bike…

Rodrigo
Rodrigo
1 year ago
Reply to  Jorge

You should make your search better. The Portuguese brand has only a trademark registered in Portugal.

Grillis
Grillis
1 year ago
Reply to  Jorge

No ones cares about a small brand from a small country in a completely different segment.

Dockboy
Dockboy
1 year ago

This really feels like a suspension design from about 1994. It looks okay, but it does not look like a modern design.

Andrew
Andrew
1 year ago

I was surprised by 116mm of rear wheel travel – I was expecting to read that it had 40 or 50mm. I’d be curious to see what it felt like!

Andrew
Andrew
1 year ago

I like it. Pity about the proprietary hub though.

Patrick
Patrick
1 year ago

I think there is a problem of suspension efficiency during rear braking…

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.