Home > Feature Stories

Hands on: Shimano XTR 9100 clips into three new pedal options

18 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

We may still be waiting for the release of the full XTR 9100 groupset from Shimano, but the first bit of kit is ready for purchase. We’re talking about the new XTR clipless pedals, which come in three flavors for the 9100 series. Well, technically two main versions with an additional option for one, but you get the point.

Hands on: Shimano XTR 9100 clips into three new pedal options

A perennial favorite among many riders and racers, Shimano’s XTR clipless pedals may just be the benchmark of durability and performance. Sure, there are lighter pedals out there, but few will stand the test of time quite like the many generations of Shimano pedals we’ve used in the past. Now, with the 9100 series, those favorites have gained a few tweaks to make them even better.

Hands on: Shimano XTR 9100 clips into three new pedal options Hands on: Shimano XTR 9100 clips into three new pedal options

When it comes to the PD-M9100 XC pedal, there are two options to choose from. Both use the same PD-M9100 part number, but one has a 3mm shorter spindle to shrink the pedal center from 55mm to 52mm. This could make it the perfect option for gravel bikes or any other bike where having the narrowest q-factor is a concern.

Hands on: Shimano XTR 9100 clips into three new pedal options Hands on: Shimano XTR 9100 clips into three new pedal options

Compared to the M9000 pedals, the 9100 has a new rounded contact area that also extends all the way to the lock nut on by the spindle. Shimano claims this rounded contact surface will help with mud shedding, making it easier to step in and out. The result is a wider contact area, but without quite as much surface area since your shoe will likely only contact the pedal at the highest point of the curved contact area. But if it means better mud shedding and easier use, it should be an improvement.

Like other SPD pedals, the 9100s offer adjustable spring tension with a 2.5mm hex wrench, and are dual sided.

Hands on: Shimano XTR 9100 clips into three new pedal options

Inside, you’ll find an adjustable and serviceable bearing on the outer portion of the spindle, and a bushing inboard.

Hands on: Shimano XTR 9100 clips into three new pedal options Hands on: Shimano XTR 9100 clips into three new pedal options

Between the two spindle options for the PD-M9100, there is only a 1g difference per pedal, and each have the same retail price of $179.99.

Hands on: Shimano XTR 9100 clips into three new pedal options

If having a bigger platform is more of your thing, the new PD-M9120 is definitely worth a look. The XC pedals’ bigger trail/Enduro sibling, the 9120 uses the same SPD mechanism with adjustable tension and bearing/bushing internals.

Hands on: Shimano XTR 9100 clips into three new pedal options

The difference obviously comes in the form of the now larger outer cage. The wider and longer contact area has been revised to better work with Shimano’s ME and AM shoe series, though it should be just as good with any other shoe you’d like to run – provided they have similar tread height. If not, Shimano now includes 1mm cleat spacers with each pedal set which should be handy if your cleat is too far recessed into the tread, making it difficult to clip in and out.

Compared to the M9020, the M9120 has a drastically revised platform shape which now extends the contact area past the center of the pedal. Now the forward parts of the cage should act as more than just a guide for clipping in and out, and actually offer additional support, provided it makes contact with your shoe. Additionally, the contact areas have channeling built-in to guide mud and debris away to address the mud shedding issue like the M9100, but in a different way that’s more in line with the use of the pedal.

Hands on: Shimano XTR 9100 clips into three new pedal options

At 198g per pedal, you’re paying almost an 82g penalty for the additional platform. But now that the Trail pedal gives you substantially more contact surface, it should be an easy choice based on your intended use of the pedals.

Like the M9100, the M9120 retails for $179.99 per set and according to Shimano is available now in the U.S. As for the rest of the group, Shimano is still calling for a March arrival for the first wave of XTR product here in the states, though the rumor is that it will not include all of the parts shown at the initial launch.

shimano.com

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

18 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
durianrider
5 years ago

Mine turn up today. I wonder how durable the axles will be compared to the 980 and 9000 series. Hopefully a lot better. Sad the XTR factory burned down. Hope it is back to normal for them soon.

j-dog
j-dog
5 years ago

C’mon shimano. You can do better. A wider q-factor is more commonly needed than narrower. How many time have you seen a rider who’s knees shoot out at the top of their pedal stroke? These are the people who could benefit from a wider stance.

MrKrys
MrKrys
5 years ago
Reply to  j-dog

Pedal spacers

thebrassnipple
5 years ago
Reply to  j-dog

Lose your gut blocking your legs from tracking correctly. Has nothing to do with a factor.

thebrassnipple
5 years ago
Reply to  thebrassnipple

Gut…

blahblahblah
blahblahblah
5 years ago
Reply to  j-dog

or put your saddle up

John mips
John mips
5 years ago
Reply to  j-dog

Huh? I race enduro and DH and even I have switched to narrower q factor. If you can’t properly corner and balance with hip rotation then q factor is the least of your problems.

Neologisticzand
Neologisticzand
5 years ago

I have loved these pedals for the time I’ve had the, but I’ve had the same issue twice with the pairs I’ve had. The seals for on the pedal spindle actually push out of the pedal body onto the axle.

Earl E
Earl E
5 years ago

Agreed. Have seen too many shimano pedals come off the spindle. No thanks.
Time pedals for life

Neologisticzand
Neologisticzand
5 years ago
Reply to  Earl E

In this case, it is only the seal that moved out from the pedal body. The pedal itself stays fully attached to the spindle

Robert
Robert
5 years ago
Reply to  Earl E

I have 5 Shimano SPD pedals and have never had a problem with any of them.

Heffe
Heffe
5 years ago

I’ve been more interested in the Nukeproof clipless pedals for my next go round. They have the old-school dual action so you don’t have to toe in.

larsv
larsv
5 years ago

Since mud shedding on the 9020 was terrible, it’s a good thing that the 9210 promises to do better!

Miles
Miles
5 years ago

Did the previous XTR have a 52 or 55mm spindle? i.e. are these really offering a more narrow q factor, or a wider one?

John
John
5 years ago

So does anyone think the XTR trail is worth double the XT trail?

Michael Gratzer
Michael Gratzer
5 years ago

Bring back the M535!!!

Larry Brenize
Larry Brenize
4 years ago

I have a set of PD-M540 That has been on a gravel bike now for about 2 years with maybe less than 1000 miles of riding on them. The one pedal has a bind in it already which I guess the bearing has gone out on it. Is this normal?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.