Home > Feature Stories

Interview: Rick Hunter with Hunter Cycles

10 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Hunter-Cycles_Rick-Hunter_Interview_Shop0100

Rick Hunter is a guy of few words – which makes an interview a little challenging. His bikes (and his slingshots) really do his talking for him. When I visited last month, after dodging redwoods on the road up from Santa Cruz, we talked about a few interesting bikes he had on hand…

BIKERUMOR: What do you think about the fixtures that are coming out?

RICK: Aw, they are awesome. I wish I had the money to buy one. I wish I had started on one of those, definitely. On my fixtures – you can do a bit more on them, build a wider variety of bikes, and not even bikes, other stuff besides bikes on them. All the pieces unbolt and you can set them up on different axes. Off this table or off these beams. A little cargo bike – you can’t really build one of those on an Anvil

Hunter-Cycles_Rick-Hunter_Interview_Shop0053

BIKERUMOR: Do you think that gives people an unfair advantage… there are really nice fixtures for frame builders now, there didn’t used to be so many.

RICK: Yeah, when I first started there wasn’t really anything like that. There were a few, but nothing that sophisticated. No mitering systems or anything like that. Now if you have ten grand or something, you can just get into it right away, now. But that’s just a small part of the whole frame-building process.

BIKERUMOR: How long have you been out of this spot here?

RICK: Six years if I had to guess, maybe seven years. So this one didn’t really get away from me, but it’s kind of a crazy old bike.

Hunter-Cycles_Rick-Hunter_Interview_Shop0034

BIKERUMOR: What… is it?

RICK: Just a single speed mountain bike, 26in wheels, I built it a long time ago. And I rode it a lot too.

BIKERUMOR: With the twin tubes and everything. It’s a little twisted too… is that on purpose?

Hunter-Cycles_Rick-Hunter_Interview_Shop0037

RICK: Twisted? Oh, yeah, it’s kind of organic for sure. There aren’t a lot of straight lines. The head tube and seat tube are straight with the bottom bracket.

BIKERUMOR: Hey, man, however you get there. When did you build this?

RICK: Umm… mid 90’s?

BIKERUMOR: What’s it made out of? Why the twin tubes everywhere?

Hunter-Cycles_Rick-Hunter_Interview_Shop0036

RICK: Just chromoly. Straight gauge chromoly. Because I’d always wanted to make a bike out of one continuous piece of tubing. This is kind of the closest I ever got to it. I rode it for few years, for sure. Did a bunch of single speed racing on it. Took it out right after the first 24 hour in Moab in the single speed class. That’s when the Crusty Cups were happening in NorCal.

BIKERUMOR: “… Crusty Cups?”

RICK: An outlaw single speed series.

BIKERUMOR: How did you have it built up?

Hunter-Cycles_Rick-Hunter_Interview_Shop0035

RICK: 26in wheels. I had this unusual mismatch of crappy parts. I had an old Fat Chance box crown fork on it for a while. And then just some cantilevers I think. I think I put those cable stops on for gears… I stopped riding it a little after that point. I remember one Full Moon Derby I crashed into a ditch… I think the front end is a little bent on it.

BIKERUMOR: That’s so cool. Do you still have the first bike you built?

RICK: No. When I was 21 I moved from Marin down here and I tossed it. Got rid of a bunch of stuff. Yeah, I regret that one, that’s for sure. I don’t have a lot of my old stuff, I usually just give it away or move it on.

BIKERUMOR: What was it?

RICK: A cyclocross bike. I was 19 or 20 [years old]… 23 or 22 years ago.

BIKERUMOR: Why did you build a cyclocross bike?

RICK: Cyclocross bikes weren’t really available, a production cross bike wasn’t really available at that point. And being tall, I always needed a custom bike.

BIKERUMOR: If you always needed a custom bike for riding, how were you getting your bikes before?

Hunter-Cycles_Rick-Hunter_Interview_Shop0051

RICK: I had a custom Wicked Fat Chance for a while, a 23 inch one. I had a custom Slingshot for a while. That’s what I had. I had an old WTB Trek- that was too small, but at that point, I just started building my own bikes. I went through trade school as a machinist and a welder and then I kinda picked it up from there. I was always working at bike shops since I was a kid.

Hunter-Cycles_Rick-Hunter_Interview_Shop0050

BIKERUMOR: Did you ever work under anyone else?

RICK: No.

BIKERUMOR: So you just went for it?

RICK: Yeah.

BIKERUMOR: How many people have you had work under you?

Hunter-Cycles_Rick-Hunter_Interview_Shop0052

RICK: Quite a few at this point, I think Todd is the only guy that’s really started his own thing. Taught this guy Matt who turned into an Engineer, a BMX kid. Darren. Charlie Colletti helped me out once or twice… four or five guys.

BIKERUMOR: So your first bike was a cross bike. You wanted a cross bike. Couldn’t get a cross bike.

RICK: The first bike took forever to make. I built it in a friend’s garage. I spray painted it and I rode it, I rode it for a long time, actually.

BIKERUMOR: Did you find yourself adding to it? Playing with it?

RICK: No. This happens to me all the time- by the time I’m actually done with something I’m kind of sick of it, I want to do another one because you think of all the things you could have done differently and you see all these tweaks here and there.

BIKERUMOR: What was the cross bike after that one? Or were you over cross also?

RICK: No, no I’m more and more into cross all the time.

BIKERUMOR: You still build a ton of cross bikes?

RICK: Almost more than anything, that’s for sure. I sponsor a little cross team too in San Francisco. Fresh Air Cycles, a bike shop up there.

BIKERUMOR: For the first bike, where were you getting tubing, and dropouts?

RICK: Henry James. They make lugs and they are a distributor for true temper and they’ve always been very approachable for new builders. They are still in business today. Nova Cycle supply was around too, just a distributor for bike tubing. Plus my buddies were into building garage bikes at the same time.

BIKERUMOR: So you did have resources.

RICK: Yeah, I wasn’t completely out in the open.

BIKERUMOR: Were you jerry-rigging fixtures?

RICK: We actually picked up Bernie Mikkelsen, a framebuilder down in Emeryville or Oakland. He made a few jigs and I picked up one of those jigs from City Cycles in San Francisco who got it from a framebuilder across the way. So they had this jig just sitting in their basement for a long time and then… that was a definitely a big part for me to start building bikes.

At this point, Rick brought out two bikes for discussion.

Hunter-Cycles_Rick-Hunter_Interview_Shop0049

BIKERUMOR: So what’s this guy for?

RICK: For just kicking around. Shit kickin. 26+ The wheels actually measure 28in. Seems like a good size to me.

Hunter-Cycles_Rick-Hunter_Interview_Shop0043

BIKERUMOR: I mean, like, it’s a big bike, but it’s to scale.

Hunter-Cycles_Rick-Hunter_Interview_Shop0038

RICK: 29er+ just seems so big. Just a lot of wheel to push around. That’s my yoke and my new chain tightening system. So… one bolt, this is it, that one bolt slides it back and forth. The rear end comes off too. There is a coupler is there. For shipping, traveling, touring and stuff.

BIKERUMOR: How much adjustability is built into that guy?

Hunter-Cycles_Rick-Hunter_Interview_Shop0039

RICK: 7/8 of an inch, which is quite a bit, actually. You can get away with ¾ of an inch. Definitely enough for a chain link.

Hunter-Cycles_Rick-Hunter_Interview_Shop0040 Hunter-Cycles_Rick-Hunter_Interview_Shop0041

If you have a freewheel on the both the front and rear wheel  you can change the gears back and forth. It has a pretty good range of gears. From 40 gear inch to 62 gear inch. You can put a replaceable derailleur hanger on this guy too. So it’s pretty unique, something you don’t really see anywhere else.

BIKERUMOR: … What?! Dude! Who is making that?

Hunter-Cycles_Rick-Hunter_Interview_Shop0042

RICK: Porcelain Rocket. There are two others of these for the other bikes. I might save one for NAHBS. Yeah. Those [bikes] are going to be called the “Bushmasters” because they are kind of a camp bike for the bush… a paratrooping bike, sorta. Four in the initial batch then maybe make it a model- a plus-size touring or camping bike.

BIKERUMOR: Oh, hello honey! What is this?!

Hunter-Cycles_Rick-Hunter_Interview_Shop0045

RICK: I built it for a surf shop for the display. If they sell it they sell it. Otherwise I’ll keep it for NAHBS, I’ve always wanted a trick 24in. I build a batch of ten 24in bikes about ten years ago.

Hunter-Cycles_Rick-Hunter_Interview_Shop0046

BIKERUMOR: What are these dropouts. Are they yours?

RICK: Yeah, Front and rear. The rear ones are my pump track dropouts. I call them the Gophers. This bike has two right dropouts because the real Gophers have a disc brake on the left side. I can get some if you want to see them. The blanks are water jet cut.

BIKERUMOR: I guess there is a good waterjet cutter around here. A couple builders are using it.

RICK: Yeah, there is a lot of industry around. In Santa Cruz… a little bit, but definitely over the hill in the whole San Jose and Silicon Valley. You can do anything you want.

Hunter-Cycles_Rick-Hunter_Interview_Shop0048 Hunter-Cycles_Rick-Hunter_Interview_Shop0047

BIKERUMOR: I like the canti stud. They are really cubic. What a toy, huh? Have you screwed around on it yet?

RICK: No, I don’t want to get it dirty yet, unfortunately.

BIKERUMOR: A $2,700 trick bike… no big deal.

Hunter-Cycles_Rick-Hunter_Interview_Shop0054

HunterCycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

10 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Kman
Kman
8 years ago

Twin tube ss 29er please; take my money!

kt
kt
8 years ago

Dude makes sick bikes and is super humble. Doin in for the 6 footers!

Greg
Greg
8 years ago

Great stuff

pdxley
pdxley
8 years ago

What an interesting interview. Thanks, Miss Schwinn and Mr. Hunter! Absolutely love that shit kicker!

Mike
Mike
8 years ago

Wow, a framebuilder who’s not full of s**t. Refreshing!

david
david
8 years ago

Hunter is on my short list, which goes like this,

1. Hunter

adam
8 years ago

Rick is cool

martini.ss
martini.ss
8 years ago

I had a Hunter. Biggest regret ever was selling it. (deleted).

reverend dick
8 years ago

WANT the shitkicker. Baaaaaaad.

Mike S
Mike S
8 years ago

great interview and great guy… but that 26+ bike doesn’t look balanced to my eye. Also building a bike with basically one tire available?? It would work betta as a B+ bike .. bunch of tires for that and still not to big.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.