Home > Bike Types > Commuter

NAHBS 2014: Calfee Builds a True Workhorse, Plus more Custom Gates Equipped E-Bikes

3 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Craig Calfee Workhorse e bike saw blad disc rotors (2)

Quick, what can you make from some wood, axe and hammer handles, some pipe, saw blades, and a handfull of bike parts? Answer – Craig Calfee’s humorous take on the “workhorse” bike. Easily one of the most creative uses of non-bike-parts-as-bike-parts of the show, the Workhorse is definitely hand built, and definitely unique…

Craig Calfee Workhorse e bike saw blad disc rotors (4)

Getting over the obvious fact that this bike is made predominantly out of wood, a cursory glance at the front of the bike clues you in that this is not a normal build. Sporting a handlebar made from segments of pipe, and ergonomic grips made from the wooden handles of hammers (hatchets?), the wacky handlebar sits on top of a custom made dual crown fork.

Craig Calfee Workhorse e bike saw blad disc rotors (3)

 

The fork legs are made from axe handles, of course. The rest of the bike makes the 29+ wheels seem completely normal.

 

 

Craig Calfee Workhorse e bike saw blad disc rotors (5)

Craig Calfee Workhorse e bike saw blad disc rotors (6)

Normally you shouldn’t stick your fingers near the rotors, but in this case you should definitely stay away. Who needs rotors when you have circular saw blades? Who knows, they might actually be cheaper than replacement rotors!

All of the bits add up to one hefty bike, so the Workhorse is equipped with a rear wheel stand. Again, it’s made from pipes.

Craig Calfee Workhorse e bike saw blad disc rotors (1)

A Workhorse is no good if you can’t stash your tools, so the bike features a massive seat/bench that includes a lockable storage space that also holds the battery.

The Workhorse was part of the Gates Carbon Belt drive electronic display, which included a number of bikes equipped with various e-motors and systems. The Calfee addition uses a Bosch Power drive motor with a Nuvinci rear hub.

Gates Belt Drive E bikes bosch alfine (5)

Gates Belt Drive E bikes bosch alfine (6)

ANT’s BioniX equipped townie had some nice lines, and this awesome shifter built in for the rear hub.

Gates Belt Drive E bikes bosch alfine (1)

Co-Motion brought Bosch power to a tandem that was equipped with a Nuvinci rear hub as well. Tandem power plus electric assist? This will be one fast tandem. Where’s the battery?

Gates Belt Drive E bikes bosch alfine (2)

Gates Belt Drive E bikes bosch alfine (3)

Dean Titanium’s Bosch Bike looked really good, and features an integrated rear rack. Just don’t impale yourself on the back…

Gates Belt Drive E bikes bosch alfine (8)

Gates Belt Drive E bikes bosch alfine (4)

Ti bikes were a popular choice for the display with additions from Eriksen and Ti Cycles. Even though the Eriksen commuter has a nice rack, the battery is mounted in the frame freeing up cargo space and keeping it from being back heavy.

Gates Belt Drive E bikes bosch alfine (7)

Not an e-bike, but this beautiful Shamrock commuter was decked out with a Shimano Alfine Di2 system.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

3 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Psi Squared
Psi Squared
9 years ago

The Shamrock commuter looks nice.

Greg
Greg
9 years ago

Hells yeah

Georg
Georg
9 years ago

You should teach your reports to take decent pictures. Give them a small DSLR, a 35mm 1.8 or even a little wider and tell them not to use flash. You pay for the trip, make it worth it 😉 Thanks.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.