Home > Bike Types > Mountain Bike

NAHBS 2016 – Distinctive road, mountain & other bikes from Wittson & W.H. Bradford

10 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

WH-Bradford-moto-clunker-hardtail-springer-fork01

W.H. Bradford is a small builder out of Rancho Cordova, CA. His collection spanned the range from a road bike worthy of being in Campagnolo’s booth to this Moto Clunker to a pair of bikes made for exploring the outer reaches.

The Moto Clunker mountain bike is a twin top tubed hardtail with single pivot “springer” fork that rides like a moto when getting rowdy. It was built for Ty Hathaway of Golden Saddle Cyclery and there’s more to it than just that odd suspension fork. Double top tube makes it more rigid, but it’s really just for looks. The dropped bend let’s the saddle’s nose nestle in there when dropped for a very moto look.

Check it, and some fabulous titanium bikes from Wittson, below…

WH-Bradford-moto-clunker-hardtail-springer-fork05

Moonmen’s titanium riser handlebars add a bit of cush and look the part.

WH-Bradford-moto-clunker-hardtail-springer-fork03

The fork doesn’t provide a ton of travel, but it should get a ton of looks. All tubes are custom bent at Monkey Likes Shiny, which is local to them. They also paint local to the Bay Area, keeping everything as close to home as possible.

WH-Bradford-moto-clunker-hardtail-springer-fork06

A coaster brake with disc tabs just in case.

WH-Bradford-campy-road-bike01

They road bike was the most straightforward of the bunch, but it did have this little bit of custom paint work to catch the eye:

WH-Bradford-campy-road-bike03

Note the exposed metal on the top of the seat mast for slip free clamping of the saddle’s post.

WH-Bradford-rando-bike-custom-carbon-fork-bottle-holders01

Their adventure bike was a labor of love to get what they want out of a touring fun bike. It has an oval top tube for shouldering and a dropper post because, well, you never know what you might get into.

WH-Bradford-rando-bike-custom-carbon-fork-bottle-holders02

Ruckus Composites molded these carbon water bottle bosses on Whisky fork for them, which stopped several folks in their tracks while I was snapping pics.

WH-Bradford-rando-bike-custom-carbon-fork-bottle-holders03

There’s clearance for up to 45mm tires, but really they built it for these Bruce Gordon Rock ‘n’ Road tires that they love.

WH-Bradford-275-plus-mountain-bike01

The 27.5+ Long Ridge is their backcountry do-it-all mountain bike. It’s Boost spaced and the longer wheebase is meant to make it more comfortable for all day rides.

WH-Bradford-275-plus-mountain-bike03

A lot of the hardware comes from Bentley out of the U.K., including some dropouts, cable guides and inserts, and the clamp for the integrated top cap and stem piece.

WH-Bradford-275-plus-mountain-bike04

Tubes are run through the frame to guide the cables and housing…

WH-Bradford-275-plus-mountain-bike05

…and they’ve done some really cool stuff with their layout to add a little form to the function.

WITTSON

Wittson-Cross-Country-Bestia-XC-titanium-mountain-bike01

Wittson is a father-son team of builders out of Lithuania. The elder, Vitas Zukauskas, originally built for Colnago and then others before turning his attention to their own brand and building exclusively of titanium. Their frames come with a lifetime warranty as the craft is being passed down to his son, Mindaugas.

Wittson-Cross-Country-Bestia-XC-titanium-mountain-bike02

The Cross Country Bestia gets their handmade titanium fork, too, which can be made for thru axles to stay current. It’s for 29ers only, can handle up to a 3.0″ tire and weighs just 1023g with an uncut steerer. And there’s no rider weight limit. It’s about $1,000, give or take for exchange rate (€739).

Wittson-Cross-Country-Bestia-XC-titanium-mountain-bike06

Wittson-Cross-Country-Bestia-XC-titanium-mountain-bike05

Wittson-Cross-Country-Bestia-XC-titanium-mountain-bike08

The internal routing is very clean, hiding the brake hose from just behind the head tube all the way to just in front of the caliper. Considering the shape of the stays (below), that’s no small feat:

Wittson-Cross-Country-Bestia-XC-titanium-mountain-bike09

Excellent tire clearance, too, and no chainstay bridge to collect mud.

Wittson-Cross-Country-Bestia-XC-titanium-mountain-bike14

Wittson-Road-Race-Suppresio-titanium-road-bike04

The Road Race Suppresio is their pavement pounder and gets shaped tubes to provide a laterally stiff ride without giving up ti’s inherent vibration damping properties.

Wittson-Road-Race-Suppresio-titanium-road-bike02

Wittson-Road-Race-Suppresio-titanium-road-bike01

A larger brake cable exit port makes it easier to fish the cable and housing out during install, then gets a titanium cover to hide the excess opening.

Wittson-Road-Race-Suppresio-titanium-road-bike06

The chainstays flow into the bottom of the BB shell, something we don’t usually see. It’s one of those things you may not immediately notice, but just gives the bike that “yeah, that looks really good” vibe. The internally routed front shift cable pops out of the tube and runs through a guide to the front derailleur – very clean!

Wittson-Road-Race-Suppresio-titanium-road-bike05

The rear shift cable runs inside all the way through the BB shell and out the end of the chainstay.

Wittson-Road-Race-Suppresio-titanium-road-bike03

Wittson.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

10 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
satisFACTORYrider
satisFACTORYrider
8 years ago

moto clunker works for me

Brian S
Brian S
8 years ago

That modified Whiskey 9 fork with accessory mounts is great! I don’t understand why Whiskey 9 and Enve aren’t doing more of this. Specialized, Trek, and Niner (possibly others) make carbon forks with places to mount racks or cages. There is a healthy market of fork mounted products, from racks, to fenders, to cages. It would be nice to see a carbon option from a non-OEM, e.g. Whiskey 9 and Enve. I’ve asked Whiskey 9 before and they responded that they have no plans to add additional mounting options to their forks.

PFS
PFS
8 years ago
Reply to  Brian S

Niner sells their gravel forks with rack mounts aftermarket. I’ve gotten one for a customer.

zukauskas
8 years ago

It’s not everyday that you see a frame builder that shares your last name, and makes pretty affordable titanium frames. Wittson is now on the shortlist for my next bike.

StinkyBob
StinkyBob
8 years ago

Is the fifth or sixth bike company Hodges has tried to run?

Michael Cleveland
8 years ago

Agree with Brian about that fork…. wonderful! We need more of those. Also, they need to have open steerers for those of us that use dyno hubs with USB chargers mounted on the steerer. Oddly, Salsa doesn’t and they’re the ‘adventure’ company.

stiingya
8 years ago

Love how it’s all pointy on the top tube right where my junk might connect. I guess “if” it connects you might was well get a good ER visit/story out of the experience, am I right….?

Brad
8 years ago
Reply to  stiingya

Yes , it’s the ENVE mountain fork . The 27.5 x 3.0 tire fit’s perfectly !

Gary
Gary
8 years ago

Is that a carbon fork on the 27.5+ Lone Ridge? Enve?

riley martin
riley martin
8 years ago

crap….why did i have to see this Road Race Suppresio. something like this could make me deviate away from carbon. that is a five star looking rig!

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.