Home > Feature Stories

Santa Cruz Springs New VPP Linkage Along with Updated Bronson and 5010

12 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Bronson Kalimotxo Hero

It’s been nearly 3 years since Santa Cruz introduced the Bronson. Launched on April Fools’ Day, the Bronson was no joke and was the company’s first stab at a bike specifically built around 27.5″ wheels. Built as an extremely capable enduro racer, a lot has changed since Bronson first came on the scene.

Top tubes are longer, geometry is more slack, and bikes are being raced even faster down unbelievably technical trails. If you pay attention to the message boards and the comment sections, riders were asking for an updated version of the beloved Bronson and 5010. As always, Santa Cruz was listening…

santa cruz vpp changes 2016

Of all of the changes to the new frames, one of the biggest would have to be in the VPP linkage itself. Compared to the older frame (on the left), the newer VPP linkage has been moved up and forward including a fairly big change to the lower link. Essentially flipped upside down, the new lower link will allow for shorter chain stays and more clearance under the bottom bracket to prevent the link from hanging up on obstacles. The upper link has been moved as well providing better stand over and a stronger interface with the frame. The revised links will be seen on both the Bronson and 5010 as well as the new Juliana models and we wouldn’t be too surprised to see the changes rollover in other models as well.

The other story pivoting around the suspension linkage is a revised suspension tune to continue the performance evolution of VPP. The linkage now provides higher initial leverage for improved small bump compliance as well as a flatter overall suspension curve with a Fox Evol can for more consistent feel and performance. The suspension still uses a progressive curve that ramps up towards the end of travel to provide the necessary bottom out resistance.

Bronson Black Profile

Bronson Frame Profile - Kalimotxo Bronson Frame Profile - Black

Building a better Bronson was not an easy task which is why the bike remains true to its original roots. To adapt to modern geometry wants, Bronson sees a one degree slacker 66° head tube angle along with a 20 to 25 mm longer reach depending on size. Chain stays are 6 mm shorter and the bike receives a shorter and 0.8 degree steeper sseat tube angle for more sizing and seatpost options.

A long time hold out for 30.9mm seat posts, the new frames will run a 31.6mm post. The frame also sees new internal cable routing with a tunnel system like the Nomad with compatibility for a side swing front derailleur. A big change for the spacing at the rear is the adaptation of Boost 148×12.

5010 Black Hero

5010 Blue Profile 5010 Frame Profile Black

The 5010 sees all the same changes as the Bronson with the tweaks in geometry resulting in a 67° Head tube angle, 20 to 25 mm longer reach, and 8mm shorter chain stays. The 5010 also get a 5 mm bump in travel bringing the total to 130 mm for the frame.

Both the Bronson carbon and the 5010 carbon carry forward 73 mm threaded bottom brackets, standard shock mounts, ISCG05 mounts, and molded down tube and chain stay protectors.

2016 santa cruz bronson 5010 build option kits

Both bikes will be available in framesets starting at $2999 with a Float X F shock, and complete builds which start at $3599 for the R AM kit up to the top end $8099 XX1 AM kit. Previously mentioned frames and builds will be available starting September 14th, while a few additional builds will become available April 1 of next year which is when we’re likely to see aluminum versions of the same bikes.

2016 bronson 5010 geometry

santacruzbicycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

12 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
FullFaceKenny
8 years ago

Yes! All positive changes in my book. Function, function, function.

How about a 110-120mm Tallboy “trail” with similar changes?!

Sully
Sully
8 years ago

Someone tell me in plain English what the intended difference between the Bronson and 5010 are?

boobie
boobie
8 years ago

Bronson = more burly
5010 = more of a trail whip

Steve
8 years ago

Someone at Santa Cruz clearly loves yellow. Every bike has some on it.

Terry
Terry
8 years ago

hooray for threaded bottom brackets!

Mac
Mac
8 years ago

What’s up with the Pink bronson? The early 90’s have come and gone. Red would have been so more cool for a Bronson, instead of the Juliana color…

Reuben
Reuben
8 years ago

Bronson = 150mm
5010 = 130mm

I need 150 maybe 2x a year… 130 has always been my sweet spot.

Throck
Throck
8 years ago

@FullFaceKenny SC had the Tallboy LT up until about 3 months ago. My guess is something is in the works.

JBikes
JBikes
8 years ago

Throck – Hopefully you are right, but I’ve heard it was just a production issue and they couldn’t keep up with demand. TBLT supposedly coming back in early 2016 after production is sorted.
I wouldn’t mind the TBLT updated similar to the 5010.

Mike D
Mike D
8 years ago

I reeeeally hope they don’t nerf the TBLT down to a 110-120 rear end. I’d love to see it be in the 125-135 range with some of the great geo updates being seen here. I know it’s too late to make changes at this point in the development stage, so I’m just keeping my fingers crossed. Pivot, Yeti, Evil are all making some pretty bikes, but are missing the mark with the lack of travel.
As for the bikes shown here, SC just made it a lot harder choice! I may have to get a Bronson, and a Tallboy for the longer XC rides..

chris
chris
8 years ago

Not new VPP linkage, just updated to the same one on the Nomad right?

MissedThePoint
MissedThePoint
8 years ago

1 more mfg that uses 31.6… that’s nice cause it can use both 30.9 and 31.6 posts.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.