Home > Bike Types > Mountain Bike

Shimano XT M8100 and SLX M7100 – complete price, spec & weight lists

complete new shimano xt m8100 group for 2019
29 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

The all-new Shimano XT M8100 group ushers in top-level performance borrowed from XTR, but brings the price down considerably and adds more options for trail and enduro bikes. The new SLX M7100 takes the price drop a step further while still offering wide range 12-speed cassettes and most of the same features. For the complete tech overview, read this post. Here are the basic specs and options for each part for both XT and SLX groups, plus a weight comparison between all three of Shimano’s current 12-speed mountain bike groups.

XT M8100 Parts & Specs

For XT, Shimano went with a Hollowtech II hollow forged arm with an updated shape. These are the same as the MT900 non-series cranks that were announced recently to start filling XTR orders until that group’s unique hollow-bonded arm design could catch up on production.

FC-M8100-1
– 172mm Q-Factor
– 52mm chain line works with 142 or 148 O.L.D.
– Prioritizes narrowest possible Q factor

FC-M8120-1
– 178mm Q-Factor
– 55mm chain line works with 148 O.L.D.
– Prioritizes frame and tire clearance

FC-M8130-1
– 181mm Q-Factor
– 56.5mm chain line works with 157 O.L.D.

Notes: The “-1” at the end of the model name indicates they’re shipping with 1x chainrings mounted to them. Single chainring options include 28, 30, 32, 34, 36T

FC-M8100-2 and FC-M8120-B2 Cranksets
– Double front chainring setup
– Swappable between single and double chainrings
– Chainring combination: 36-26T
– Chainline options: 48.8mm (FC-M8100-2, 172mm Q-Factor) and 51.8mm (FC-M8120-B2, 178mm Q-Factor)

CN-M8100 Chain
– New HYPERGLIDE+ shift technology
– Extended inner link plate
– Quick link for easy service.

CS-M8100-12 Wide Range – 10-51T
– Designed for single front chainring setup
– 510% gear ratio with smart gear steps to extend the range
– (10-12-14-16-18-21-24-28-33-39-45-51T)

CS-M8100-12 Rhythm Step Cassette – 10-45T
– Designed for double or single front chainring setup
– 450% gear ratio with ideal gear steps
– (10-12-14-16-18-21-24-28-32-36-40-45T)

The shifters get the best of XTR’s features, but with a larger thumb lever paddle.

SL-M8100-IR and SL-M8100-R – Right Shift Levers
– MULTI RELEASE allows the release of two gears at a time
– 2-WAY RELEASE with instantaneous push and pull movements
– Textured rubber pad on lever for grip
– 14mm slide range and 20-degree rotation for I-SPEC-EV (SL-M8100-IR)

SL-M8100-IL and SL-M8100-L – Left Shift Levers
– Front double shifting with single lever design
– 2-WAY RELEASE with instantaneous push and pull movements
– Textured rubber pad on lever for grip
– Natural finger position and intuitive shifting operation

The new XT rear derailleurs come in two variants…one for 1x setups only (left), and the other for 2x drivetrains with the smaller 10-45 cassette. In fact, you can only run the 10-45 cassette when paired with a double chainring up front as the 51-tooth cog is simply too much for either derailleur to handle when on the big ring…they’d have to make the cage too long to add enough chain, and that would create ground clearance issues. Both use 13-tooth pulleys.

RD-M8100-SGS Rear Derailleur for 1x Setup
– For single front chainring setup
– 51T max cog size
– Works with both 10-51 and 10-45-tooth cassettes

RD-M8120-SGS Rear Derailleur for 2x Setup
– Designed for double front chainring setup
– 45T max cog size
– Compatible with 2×12 speed or 1×12 with 10-45 cassette

Yep, you can still get a modern 2x mountain bike drivetrain with high end bits. While you probably won’t find any bikes spec’d like this in North America, it is available and will be on a few Euro brands…for Europe.

FD-M8100-D/E/M Front Derailleur
– SIDE SWING front derailleur
– D, E, and M-type mounts
– 10T total capacity
– 48.8mm and 51.8mm chain lines

The brakes get shared levers for both 2- and 4-piston calipers and all the adjustments you’d want and a refined Servo-Wave lever ratio for smoother braking power throughout the stroke.

BL-M8100 Brake Lever
– One XT brake lever for both 2-piston and 4-piston brake calipers
– Quick brake engagement with shorter free stroke
– Optimized lever axle position
– Refined ergonomics featuring a taller and flatter lever blade face

The brake calipers come with finned metal pads as stock, but non-finned and organic pads are available as options. Both use an inboard banjo housing routing for improved aesthetics. Model names are BR-M8100 (2-piston brake caliper) and BR-M8120 (4-piston brake caliper)

RT-MT800 – ICE-TECHNOLOGIES FREEZA Rotors
– Boosts heat dissipation bringing FREEZA technology to the XT group for the first time
– Reduces fade
– 140mm, 160mm, 180mm, and 203mm

Two sets of wheels are available, a lighter weight XC version that uses the new straight pull hubs with 24mm (internal) rims, and a burlier set with new wide-flanged, J-bend spokes and offset 30mm wide (internal) rim for a trail-worthy wheelset.

WH-M8100-TL – Lightweight tubeless wheels
– 28 straight pull spokes
– Inner rim with 24mm for use with tires up to 2.35-inches
– 27.5 and 29-inch diameter options
– E-THRU – 110 mm and 148 mm O.L.D.

WH-M8120-TL – Wider and stiffer wheels
– Zero Dish
– 28 J-bend spokes
– 30mm inner rim width for tires up to 2.6-inches
– 27.5 and 29-inch diameter options
– E-THRU – 110 mm and 148 mm O.L.D.

The hubs are also available separately to pair with your favorite rims.

HB-M8110/-B and FH-M8110/-B Hubs
– Lightweight aluminum FREEHUB body and driver plates
– O.L.D. – 100 mm (HB-M8110), 110 mm (HB-M8110-B)
– O.L.D. – 142 mm (FH-M8110), 148 mm (FH-M8110-B), 157mm (FH-M8130-B)

HB-M8110-BS and FH-M8110-BS – Straight pull DEORE XT Hubs
– 3-cross spoke pattern only
– O.L.D. – 110 mm (HB-M8110-BS)
– O.L.D. – 148 mm (FH-M8110-BS)

shimano xt m8100 xc pedals features and specs

The PD-M8100 XC pedals get a slightly wider platform for better lateral stability under your shoe, plus an offset binding to help shed mud.

The PD-M8120 trail pedal’s platform is now a bit longer to give you more support, helping keep your feet comfortable on all-day rides.

The PD-M8140 platform pedals get a new concave design and 10 pins per side. They’re optional if you want to install them, and you’ll find sets of both 3.5mm and 5mm pins in the box. They also come in two sizes: Small (size 36-44EU shoes) and Large (43-48).

SLX M7100 Parts & Specs

complete specs for new Shimano SLX M7100 mountain bike group

The new SLX M7100 group brings most of the tech down to their most affordable trail-worthy group, including 12-speed cassettes, Dynashift+ and DCE+ chain management. There are a few sacrifices to costs, namely materials and finishes (and finishing), but functionally, all of the important stuff is here.

The SLX cranks also use HollowTech II construction and have a new “blue steel” finish that looks gray until the sunlight hits it. It, too, comes in single and double chainring variants using the same direct-mount pattern as XT and XTR. That means all chainrings from any group can be mixed and matched, and we’ll likely see aftermarket options pop up, too. SLX has a smaller variety of single chainrings, offering just 30, 32, and 34 tooth options.

FC-M7100-1
– 172mm Q-Factor
– 52mm chain line works with 142 or 148 O.L.D.
– Prioritizes narrowest possible Q factor

FC-M7120-1
– 178mm Q-Factor
– 55mm chain line works with 148 O.L.D.
– Prioritizes frame and tire clearance

FC-M7130-1
– 181mm Q-Factor
– 56.5mm chain line works with 157 O.L.D.

For the doubles, it’s the same basic deal, and the CN-M7100 chain simply gets different surface treatments but still uses the same extended DCE+ inner plates. You’ll have FC-M7100-2 and FC-M7120-B2 Cranksets with a 36/26 combo, and two chainline options:
– 48.8mm (FC-M7100-2 / 172mm Q-Factor)
– 51.8mm (FC-M7120-B2 / 178mm Q-Factor)

CS-M7100-12 – Wide Range Cassette – 10-51T
– Designed for single front chainring setup
– 510% gear range
– (10-12-14-16-18-21-24-28-33-39-45-51T)

CS-M7100-12 – Rhythm Step Cassette – 10-45T
– Designed for single and double front chainring setups
– 450% gear range with more ideal gear steps
– (10-12-14-16-18-21-24-28-32-36-40-45T)

The big difference with the shifters from XT is the lack of a rubber thumb pad, and they lose Multi-Release and Instant Release on the trigger. But, that trigger still works in both directions for releasing cable to go to a harder gear.

SL-M7100-IR and SL-M7100-R – Right Shift Levers
– Ergonomics focused on comfort and control
– 2-WAY RELEASE with instantaneous push and pull movements

SL-M7100-IL and SL-M7100-L – Left Shift Levers
– Front double shifting with single lever design
– 2-WAY RELEASE with instantaneous push and pull movements

The rear derailleurs come in both variants, one for 1x and one for 2x, and a front derailleur to match.

RD-M7100-SGS Rear Derailleur for 1x Setup
– For single front chainring setup
– 51T max cog size
– Works with both 10-51 and 10-45-tooth cassettes

RD-M7120-SGS Rear Derailleur for 2x Setup
– Designed for double front chainring setup
– 45T max cog size
– Compatible with 2×12 speed or 1×12 with10-45 cassette

FD-M7100-D/E/M Front Derailleur
– SIDE SWING front derailleur
– D, E, and M-type mounts
– 10T total capacity
– 48.8mm and 51.8mm chain lines

BL-M7100 Brake Lever
– One SLX brake lever for both 2-piston and 4-piston brake calipers
– Quick brake engagement with shorter free stroke
– Optimized lever axle position and refined ergonomics

The calipers are BR M7100 for 2-piston and BR M7120 for 4-piston variants. Shimano doesn’t disclose the actual piston sizes for any of these brakes, but our contact says those measurements haven’t changed from prior models.

With SLX, there are nearly silent hubs available, but no complete wheels.

HB-M7110/-B and FH-M7110/-B Hubs
– Lightweight aluminum FREEHUB body and driver plates
– O.L.D. – 100 mm (HB-M7110), 110 mm (HB-M7110-B)
– O.L.D. – 142 mm (FH-M7110), 148 mm (FH-M7110-B), 157 mm (FH-M7130-B)

SLX / XT / XTR Price & Weights Comparison

This table is a quick comparison of the key component weights for a sample complete group, comparing SLX to XT to XTR. For the complete weights for every size of every component, scroll to bottom…

SLX XT XTR
Component Weight Price Weight Price Weight Price
Rear Derailleur 316g $75 287g $115 240g $257
Crankset 631g $105 620g $155 534g $420
Chainring ** $33 ** $62 ** $133
Bottom Bracket 82g $26 82g $26 73g $41
Shifter (iSpec-EV) 117g $39 120g $61 112g $130
Cassette 534g $100 470g $160 367g $390
Chain 252g $32 620g $155 534g $420
Brakeset 311g $175 301g $210 279g $326
Rotor 133g $30 109g $53 108g $80

Notes:

  • Cranksets are 175mm arms w/ narrowest Q-factor option, 32-tooth chainring
  • Chainring weight is included in crankset weight
  • Cassette weight is for 10-51
  • Brakeset is weight and price per wheel w/ 4-piston calipers
  • Rotor weight and price is per wheel for 180mm Centerlock
  • Pedal weights (shown below) are for the pair

As listed, the complete groups with cranks, 32t ring, front and rear 4-piston brakes come in at:

  • SLX = 2,820g / $820 (drivetrain only: 1,932g / $409.93)
  • XT = 2,651g / $1,149 (drivetrain only: 1,831g / $623)
  • XTR = 2,342g / $2,248 (drivetrain only: 1,568g / $1,436)

Wheel and Pedal weights

M8120 XT Trail Wheels – 27.5″ 1,891g $420
M8120 XT Trail Wheels – 29″ 1,977g $420
M810 XT XC pedals 342g $120
M8120 XT Trail pedals 438g $120
M8140 XT flat pedals – small 460g $85
M8140 XT flat pedals – large 503g $85

For comparison, the XTR pedals are 28g lighter for XC version, and 40g lighter for trail version, but cost $60 more…for the regular spindle.

Complete SLX, XT and XTR component weights list

actual weights for every 2019 shimano xt m8100 and slx m7100 mountain bike component compared to xtr

Click to enlarge, and a huge thanks to Shimano for putting this chart together for us!

Ready to learn more about the groups? Read our complete tech overview here, and our first ride review here!

mtb.shimano.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

29 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
ken
ken
4 years ago

Liking that Xt group but those chain prices whoa ! 420$ for the xtr Chain what the what?

-s
-s
4 years ago
Reply to  ken

typo

Cheese
Cheese
4 years ago
Reply to  ken

(deleted)

VeloFreak
VeloFreak
4 years ago

Bye bye Sram. It was ok while it lasted, it was ok. Just ok. Not the best moment now to talk about that narrow wide rear gx cassette with broken teeth, or clunk or your brakes. Too late now. I wish you the very best of luck SRAM, and also to all the SRAM PR people reading these and the marketing guys, hi there guys!!!

This brings better performance than XX1, better finish, better design, better braking, no plastic shift levers, with the price of GX or lower…

Wish you best of luck SRAM. You had a nice run.

vilofrick
vilofrick
4 years ago
Reply to  VeloFreak

Where does your claim of better performance come from? Have you ridden this groupset that’s not available to the public yet?

Padrote
Padrote
4 years ago
Reply to  VeloFreak

being tribal about bike component brands is hilarious. SRAM’s mountain drivetrains are clearly some of their best products. they aren’t going anywhere.

Scott
Scott
4 years ago
Reply to  Padrote

“SRAM’s mountain drivetrains are clearly some of their best products..”

That’s some pretty faint praise. I have SRAM stuff, but honestly I’ve always viewed it as, “meh, fine.” It always struck me as lower quality than Shimano, and it’s never worked quite as well especially their chains/cassettes. Their road components are super light though, so I stick with em, but I still run shimano chains and cassettes…

Dolan Halbrook
Dolan Halbrook
4 years ago

I think those chain weights and prices are off for XT and XTR (SLX looks correct):

Chain 252g $32 620g $155 534g $420

threeringcircus
threeringcircus
4 years ago
Reply to  Dolan Halbrook

Looks like the crankset weights and prices for XT and XTR were duplicated on the chain row.

Eggs Benedict
Eggs Benedict
4 years ago

Did someone fat-finger their XT & XTR chain pricing?

Eggs Benedict
Eggs Benedict
4 years ago

Shimano, if you are reading this, please offer a 2X XT chainring combination in 34-28t. Thanks.

Greg
Greg
4 years ago

Incorrect chain prices and weights are likely the second option cassettes for their respective groups.

J.D.
J.D.
4 years ago

Why dont you campare with SRAM ???

bob88
bob88
4 years ago

None of the write ups today have mentioned that any upgrade to 12 speed will need a new hub/wheel with micro-spine.

paquo
paquo
4 years ago
Reply to  bob88

really i cant take my roval/dt 11 speed xd setup and simply purchase a microspline freehub ?

-s
-s
4 years ago
Reply to  bob88

They are micro spline. This was talked about earlier by BR.

captain derp
captain derp
4 years ago
Reply to  bob88

there are a few companies already offering microspline freehubs for existing hubs (I9, DT, king, maybe a few others). now that it’s being offered on XT and SLX i’d expect the number of companies offering microspline freehubs will increase fairly quickly.

m
m
4 years ago
Reply to  bob88

no different then switching over to Sram.
Its like everyone forgot that Sram did the same thing with XD driver

onrhodes
4 years ago
Reply to  m

Whoa….did someone just utter common sense? Thank you for seriously pointing this out. SRAM came in with their stupid XD driver after decades of a good old fashioned shimano style cassette body. Now Shimano comes out with microspline and people are freaking out.

Smokestack
Smokestack
4 years ago
Reply to  bob88

Because it’s a foregone conclusion that yes, Micro Spline is the new standard from Shimano. This is less of a big deal than us innernet keyboard warriors try to make it out to be. Also, it’s a marked improvement in design over both HG and XD drive systems. I welcome that.

reverend dick
4 years ago

Are the new hubs retaining the cup and cone bearings Shimano has stuck with, or moving to cartridge?

JoiningTheFray
JoiningTheFray
4 years ago
Reply to  reverend dick

Definitely looks like cup and cone and I’m not sure that will ever change.

Mathias
Mathias
4 years ago
Reply to  reverend dick

Shimano uses fully serviceable bearings instead of one-time cartridge. This allows Shimano to make proper TIGHT fit between hub sheel and the bearing race. The same (tight fit) goes with cone and axle. In case of cartridge bearing You must calculate fit very precisely and when inner race (of cartridge) is tight fit then outer race must be sliding fit. This causes bearings to grind the outer shell in several months of use and bearings get shot (dead) due to slippage. It’s actually pretty difficicult to explain to newbies. Long story short: long term reliability of bearings is difficult to achieve with cartridge bearings.

Jason
Jason
4 years ago

Well balance has been returned to the bikeverse. I could not be happier. Now what the premium will be for OEM builds with XT will be….. that is a whip of a different freehub.

JGicklhorn
4 years ago

Glad to see that the weights for XT 12s have stayed at or below XT 11s, but anyone notice how prices for the new SLX 12s are the same as old XT 11s???? ($409 SLX 7100 drivetrain vs. $424 XT M8000)
https://www.pinkbike.com/photo/13148418/

Cale C.
Cale C.
4 years ago

great thing is the 11 speed stuff will become stupidly cheap now 🙂

Axe
Axe
4 years ago

Note – You can not use the left crank arm (e.g. Stages Power Meter for M8000) on the new M8100. The crank axle on M8100 is 5 mm shorter than M8000 and the left arm is 5 mm thinner than M8000.

Tim
Tim
3 years ago

The weights of the brakesets don’t seem to line up between the list and the price analysis. One XTR brakeset weight says 279g for 4-piston where the fill list from Shimano says 385g, and similar discrepancy in the Race version. That’s a huge difference. Can someone make sense of that?

Abc
Abc
2 years ago

What’s the difference in length between m8120 and m8100 derailure ?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.