Home > Feature Stories

Chris King buzzes into Micro Spline driveshell production for new hubs & conversion kits

13 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

For fans of Chris King and the latest Shimano mountain bike components, it’s almost time to celebrate. Why? Because today, Chris King officially announced that they are ramping up production to release Micro Spline compatible driveshells by the end of January.

As a quick refresher, Micro Spline is the new freehub standard from Shimano that they created to work with smaller 10 tooth cassette cogs on 12 speed cassettes. Currently, you’ll find Micro Spline cassettes in the Shimano XTR 9100, XT M8100, and SLX M7100 families, though we’re assuming we’ll see more cassettes use it in the future as well.

The roll out of Micro Spline compatible freehubs from companies other than Shimano has been a bit slow, but we’re told that they’re rapidly approving new licenses to anyone who meets the requirements for production. Which is great news for anyone looking to buy a new Chris King hub – or more importantly, anyone looking to retrofit a current ISO Boost or Superboost hub.

True to Shimano’s promise of a lighter freehub system, Chris King says that their Micro Spline driveshell uses a new bearing and axle design which has resulted in their lightest ISO hub to date.

New hubs will be offered in ISO B (Boost) and ISO DH Superboost configurations and in both stainless steel or ceramic bearings. Conversion kits will also be offered to fit all ISO B and ISO DH Superboost rear hubs. Expect the new hubs and conversion kits to start shipping on January 31st, and as usual, they’re backed by King’s Lifetime Warranty.

CONFIGURATIONS:

  • ISO B
    • 148x12mm
    • 24h, 28h, 32h
    • Stainless Steel or Ceramic bearings
  • ISO DH Superboost
    • 157x12mm
    • 28h, 32h
    • Stainless Steel or Ceramic bearings
  • Conversion Kits
    • Stainless Steel or Ceramic Bearings
    • 148x12mm or 157x12mm

chrisking.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

13 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Greg
Greg
4 years ago

… I just now realized that King only makes centerlock hubs for road. So dumb…

K-Pop is dangerous to your health
K-Pop is dangerous to your health
4 years ago
Reply to  Greg

Show us a road group that comes with ISO rotors.

Zach
Zach
4 years ago

And boom goes the dynamite

Greg
Greg
4 years ago

Sorry for the confusion, guys. I meant that they only offer the (preferred) Centerlock mounting for road, and not for mountain. It’s aannoying that their mountain hubs are still 6-bolt.

Greg
Greg
4 years ago
Reply to  Greg

Also they do offer the r45 in 6-bolt, not that anyone would bother with that.

thesteve4761
thesteve4761
4 years ago
Reply to  Greg

Which can easily be converted to IS with a simple, cheap, effective, and lightweight adapter.

toomanypuppies
toomanypuppies
4 years ago
Reply to  thesteve4761

Agreed. The Centerlock adapters from DT Swiss and Bike Ahead are some of the nicest and easiest to use ones out there. I see no disadvantage and no big deal to using one…..After seeing numerous home mechanics strip-out rotor bolts, it is one standard *ahem* that should be universal.

Shafty
Shafty
4 years ago
Reply to  Greg

Centerlock is great! You can use any rotor you want, and they’re much easier to deal with. A single fastener, the lockring, is removed with an ubiquitous tool. I prefer centerlock hubs, but mostly use 6 bolt rotors anyways. 6 little bolts is tedious!

Marc L
4 years ago
Reply to  Shafty

Centerlock (or IS with CL adapter) is great for travel too- I toss my lightweight Wolftooth lockring tool (with an 8mm insert for pedals on the other end) in my travel case and have no excuse not to remove the rotors when flying/shipping. Sure beats trying to straighten a bent rotor or locate missing rotor bolt on the first day of vacation.

Rey
Rey
4 years ago

How about for the 142mm spacing are they making?

Moby
Moby
4 years ago

Need 142. Please.

Enrique García Rincón
Enrique García Rincón
4 years ago

142?!!

Cam Bell
Cam Bell
4 years ago

Why did King leave off 142mm wide axle for retrofit?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.