Home > Clothing-Gear-Tools

NAHBS 2016 – Abbey Tools, PAUL, Gevenalle, Cadence and SILCA in Cool Stuff Super Round-up

19 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

NAHBS-2016_Abbey-Tools_carbon-ti-hammer

Abbey Bike Tools raises the bar of top-end tools by bringing a new, ultra-light carbon titanium hammer to the show. Gevenalle takes it to eleven with shifters and derailleurs (with guest star, Squid Bikes). Last but not least, Cadence serves fresh cuts to keep you looking fly off and on the bike…

The base level Titanium Hammer, which features a full titanium body, is misunderstood by the masses while being a daily necessity of the best bike mechanics. In an effort to take the Titanium Hammer to the next level, Jason Quade added a bonded carbon handle. This model will only be lightening the tool pouches of a lucky few, however, as it was a limited show-only release.

NAHBS-2016_Abbey-Tools_hanger_bearing-press

A jovial Jason was also stoked to show off his Modular Bearing Press.

NAHBS-2016_Abbey-Tools_modular-bearing-press-2 NAHBS-2016_Abbey-Tools_modular-bearing-press

The press features a long threaded portion to give users greater capability in the size of jobs possible. It has a magnetically captured split nut on the opposing end to save you turns and time when working on smaller projects.

NAHBS-2016_Abbey-Tools_track-whip

Any new track specific tool is exciting- so it was awesome to see this special track chain whip, featuring an extra long, round handle so you can install those highly torqued cogs in comfort. Track fans rejoice!

NAHBS-2016_Abbey-Tools_wash-buddy_PAUL-Components-2 NAHBS-2016_Abbey-Tools_wash-buddy_PAUL-Components

Also new for the show is a special PAUL Components-equipped Abbey Wash Buddy to help you clean your rig in style.

AbbeyBikeTools.com

PAUL Components

NAHBS-2016_PAUL-Comp_stem

Speaking of PAUL: the proudly Made in the USA component manufacturer showed off an ultraviolet-anodized Boxcar stem. The Boxcar is online and ready to ship (but only in black, silver, and polished styles).

NAHBS-2016_PAUL-Comp_disc

There were, of course special color editions of other components, namely this smart blue Klamper brake caliper.

PAULComp.com

Gevenalle

NAHBS-2016_Gevenalle_Adam-Clement

The enthusiasm in the Gevenalle booth was as tangible as its luxurious table covering…

NAHBS-2016_Gevenalle_CX

Gevenalle showed off a new Shimano 11-speed compatible Burd Rear Derailleur. Made specially by Microshift the derailleur features a higher spring tension to keep your drivetrain on track on bumpy ‘cross courses.

NAHBS-2016_Gevenalle_11s_CX

Here, Adam Clement models Gevenalle’s new Dyna-Sys derailleur-compatible shifter.

 

NAHBS-2016_Gevenalle_friction

For those looking for a more throw-back look, Gevenalle has introduced these attractive AUDAX friction shifters.

NAHBS-2016_Gevenalle_Squid

Show goers could see Gevenalle in action on a banana-themed Squid Bike chilling in the back of the booth.

Gevenalle.com     SquidBikes.com

Cadence

NAHBS-2016_Cadence_track-jacket-02 NAHBS-2016_Cadence_track-jacket-01

Cadence debuted the Dauber Coaches Jacket. While less technical than those in its performance line, the jacket features a state-of-the-art drawstring waist and sleeve branding.

NAHBS-2016_Cadence_DK-2 NAHBS-2016_Cadence_DK-1

Among the new cycling hat style themes shown was this special Dustin Klein-illustrated cap for SILCA.

CadenceCollection.com

SILCA

NAHBS-2016_SILCA-01

Speaking of SILCA: though the show floor was dripping in painted-to-match Pocket Impero frame pumps, it didn’t stop the pump brand from bringing a few show-stopper Super Pista Ultimates.

NAHBS-2016_SILCA-03 NAHBS-2016_SILCA-02

This pump was custom painted for Don Walker by Corby Concepts out of Indianapolis, IN.

SILCA.cc

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

19 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Blake
Blake
8 years ago

please explain why the titanium hammer is “a daily necessity of the best bike mechanics”. i think it is a neat tool, but in no way do I see how it is a necessity.

Sasquatch2
Sasquatch2
8 years ago
Reply to  Blake

agreed, duct tape is still my #1, right behind sledgehammer.

Josh Harney
8 years ago
Reply to  Blake

He’s referring to traveling race mechanics, and the necessity is in your carry-on weight. Every ounce matters.

Eric Hansen
Eric Hansen
8 years ago
Reply to  Blake

Abbey Tools’ hammer is the ONLY tool of theirs I don’t get. The ENTIRE point of a hammer is to put mass on the end of a lever arm, allowing nearly elastic collision between the hammer head, and the object being struck. mv(hammer) = mv(object) If mass goes down, velocity must proportionately go up to effect the same change in momentum of the struck object. I keep a 3 pound engineer’s hammer in my toolbox for this reason. I only need do a bit more than tap the object to get it to move. With a light hammer, you’ve got positively whip the head at the object, increasing the chances you miss entirely.

Dave
Dave
8 years ago
Reply to  Eric Hansen

Tangent…

I can swing my light (14 oz) framing hammer faster, more accurately, and for longer (drive more nails) than my 21 oz hammer. I much prefer the lighter hammer except for things that require a several pound hammer like you describe.

But yeah, I think the reason this tool needs to be light is for travel. I also don’t think heavy hammers are needed for bike work… at least not in my experience.

anonymous
anonymous
8 years ago

First of all, it’s Audax, which is fairly standard cycling vocabulary. Second of all, they’re just Dia-Compes, they’re not even rebranded like the Microshift ones, the Audax just refers to them using older Campy-style Tektro levers, like the original retroshift.

Chris
Chris
8 years ago
Reply to  anonymous

If I was still a race mechanic I would consider a titanium hammer a necessity. Anyone who doesn’t understand this hasn’t had the experience of schlepping around an Ellis case full of tools! Those tool cases get really heavy, really fast.

anonymous
anonymous
8 years ago
Reply to  anonymous

And BR didn’t even strikethrough AUDUX and just stealth changed it to AUDAX

Donald Butler
8 years ago

When you are travelling with your tools anything that you can do to lighten the load to miss the baggage limits is important.

dustytires
8 years ago

I don’t get the Gevenalle stuff. Looks like cheap crap, aint’ really that cheap compared to mid range S and S parts and not made in USA… So, what’s the point? Pauls stuff I get, unique, Made in USA, purple check. Abbey Tools, get it, unique, Made in USA, Ti cool check.

Tim
Tim
8 years ago
Reply to  dustytires

Gevenalle’s stuff ain’t cheap crap. They re-spec the bushings in the Tektro levers they use, and the Microshift shifters they install are custom jobs. They’re compatible with 7, 8, 9, 10, and 11 speed, road or mountain, can be gutted for 1x or single speed, and they offer a rebuild service if you break something. They’re lighter and cost less. The shifter mount is made in the US, they just use Taiwanese shifters and brake levers. And that’s just the handlebar controls.

typevertigo
typevertigo
8 years ago
Reply to  dustytires

They make a good case for themselves for cross races. You can’t dump more than three cogs with STI levers. Gevenalle’s levers allow you to dump all cogs with one sweep.

If your day really gets bad you can even run them as friction shifters. Not crappy at all if you ask me.

dr_lha
dr_lha
8 years ago
Reply to  dustytires

I product is only worthy if it’s exquisitely and hand made by a bearded hipster in Portland now? Gevenalle is making a product that fits a real need, why does it matter how or where it is made?

PFS
PFS
8 years ago
Reply to  dr_lha

Well, this is after all the north american hand built bike show. Its kind of in the name…

jeb
jeb
8 years ago

+1 @dustytires

Pit
Pit
8 years ago

The abbey tools are saweeet!

David Holm
David Holm
8 years ago

UV stem !!!

will
will
8 years ago

Regarding the Cadence stuff: “the jacket features a state-of-the-art drawstring waist and sleeve branding”. That’s a joke right?

Burton
Burton
8 years ago

I Gevenalle — or somebody — would make a ratchet-shifting brifter.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.