Home > Bike Types > Mountain Bike

All new Ibis Exie is a super light & capable XC mountain bike that’s Made in the USA

7
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Ibis claims that when they started their Carbon 831 Lab, they didn’t initially set out with the goal of in-house manufacturing. Initially, they simply wanted to use it as a tool for prototyping and development, but along the way, they got curious. What is possible when it comes to making carbon frames in the USA? What would Ibis have to do to make it feasible?

They set out to find that answer with a trial run of a single size for a single model. Those Small Ripleys were a success, and it led Ibis to pursue their first model completely built in-house – the all new Ibis Exie.

Now Ibis kind of snuck this bike onto their site without much information, but we have a general idea of what’s coming thanks to the video above. In it, Ibis partner and CEO Hans Heim details the process that got them here, along with additional commentary by their Development Engineer Preston Sandusky and Engineering Manager Colin Hughe.

Remaining true to their claims with the initial Carbon 831 project, Ibis says two main things really set their process apart from Asian carbon factories like those that make other Ibis models in Taiwan and Vietnam: the layup and the molds.

Ibis Exie carbon plies

While other factories certainly have automated cutters, Ibis claims that they use them differently. Instead of making many smaller pieces that require a lot of time to lay by hand, Ibis makes fewer, more complicated and intricate pieces that reduce the parts count from 300-400 pieces, down to about 100-120. That saves time both prepping the materials and in the layup process, which helps cut the overall time needed to make a frame substantially (the claim is roughly 40%).

Ibis Exie frame being placed into a mold

New carbon manufacturing facility for Ibis in Pajaro for Ibis Exie
The new Ibis carbon manufacturing facility is in Pajaro, CA, which is about 30 minutes from Santa Cruz. Note the full solar array on the roof.

Ibis also points out that the molds are internally heated which makes them more energy efficient – enough so that they can power the process with their own solar panels on the factory roof. All of this results in fewer hours spent building each frame, and less energy used to manufacture them, all while offsetting the energy needed to build the frames through renewable sources.

Ibis Exie carbon frame test facility

Hans goes on to say that they’ve invested in their own testing facility so that they can go back and forth between prototyping and testing quickly. That has given them the opportunity to do more iterations of each prototype, making lighter and stronger parts.

Made in the USA Ibis Exie carbon mountain bike with build team

If you’re wondering why more companies haven’t gone down this route already, the answer is simple: it’s really, really hard. Hans mentions that the project has increased their respect for their factories and made them how good they really are. But that doesn’t mean there isn’t room for improvement. It’s just that that improvement doesn’t come easy.

2022 Ibis Exie Details

Ibis Exie mountain bike profile in the sun

When it comes to the bike itself, Ibis hasn’t unveiled the completed bike, but we know the general layout. Designed around 29″ wheels with clearance for 2.4″ tires, the bike started life as a World Cup worthy XC bike, but evolved into more of a “BC Bike Race XC bike” for all day adventures. That means a 100mm travel frame paired with a 120mm travel fork to keep things light but capable.

Ibis Exie has room for two water bottle cages

Suspension comes from the legendary dw-link system with bushings for the lower link and bearings for the upper. There’s also a custom top guide that’s mounted to the lower link.

Ibis Exie raised chainstay protector

A threaded bottom bracket keeps maintenance simple, and there’s a ribbed chainstay guard to keep things quiet.

Ibis Exie internal cable routing is tube in tube

Cable routing is internal with tube-in-tube construction, and there’s room for two bottle cages inside the front triangle.

2022 Ibis Exie geometery

Four sizes will be offered, with a 67.2° head tube angle, and a 73.8°-75.9° seat tube angle depending on the size.

Pricing & Availability

tire clearance for Ibis Exie

Want one? Like all bikes at the moment, the big question mark is the supply chain needed for Ibis to spec the bikes. They’re hoping to have complete bikes rolling out the door this summer. But because of the uncertainty with what will be available, when, they’re saying that builds are subject to change.

But we can tell you that pricing for complete bikes will start around $7,999 and top out somewhere around $12,799. The frame only will also be offered for $4,499 which includes a 7 year warranty on the frame and lifetime replacement for the bushings. You can sign up at the Ibis site linked below for more details as they become available.

ibiscycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

7 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
gregoryvanthomas
1 year ago

I’d love to know the weight with shock and all required hardware like hanger and seatpost clamp.

benito
benito
1 year ago

I’m a diehard Ibis fan, but the prices seem plenty steep. Frame price for example is what, $1kish above Ripmo carbon? I wonder how much of that is some mix of supply/demand pricing, new frame features, or domestic production. Either way I’m all about it, just a bummer to see the prices.

Memin
Memin
1 year ago
Reply to  benito

Have my ripley with an xc setup…. Except for weight.. Ripley is a winner over this new one.
3lb more as I have it.

Seraph
Seraph
1 year ago
Reply to  benito

Average BR user: Boo! Made in USA is best! Make our frames in the US!
Also average BR user: Boo! This frame is overpriced!

alloycowboy
alloycowboy
1 year ago

Wow, that is a tight triangle for two water bottles, I would like to see the folks at Ibis take them out.

Brent
Brent
1 year ago

Made in the USA! That’s all I need to know.

Seraph
Seraph
1 year ago

“When it comes to the bike itself, Ibis hasn’t unveiled the completed bike, but we know the general layout…” it says, with a picture of a complete Exie right above it.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.