Home > Bike Types > Mountain Bike

Eminent Cycles floats a new suspension w/ Haste enduro mountain bike

Eminent Haste enduro mountain bike details and launch
15 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Upstart mountain bike brand Eminent Cycles is the brainchild of Jeff Soncrant and Kevin Sigismondo, who took their engineering chops honed in jobs at Giro, Easton, Bell and Ride 100% and built the bike they wanted to ride. The result is the Haste, a four-bar linkage, 160mm travel, 27.5″ wheeled enduro bike that floats the shock and the rear brake to keep everything moving smooth and supple.

They’re mated to a full carbon fiber frame with their own blend of hi-mod fibers molded into unique shapes and stout tube profiles. The idea was to make the frame very stiff so the suspension could do its job without any binding or twisting to slow it down.

Eminent Haste enduro mountain bike details and launch

All cables run internally though guided channels to make set up easy and keep them from rattling. Ease of use, ownership and serviceability is another key part of the company – they didn’t want to just build the bike of their dreams, but also build an experience that would keep riders stoked. It comes 95% pre-assembled without excessive packaging. Just open the box, attach the handlebar and front wheel, and you’re basically ready to roll. And it comes just the way you want it, with an online bike builder that lets you choose parts from Shimano, SRAM, Fox, RockShox, Cane Creek, DT Swiss, Industry Nine, Maxxis, E.13, MRP and others. It also walks you through the bike fit to help you choose the right bar widths and other component measurements.

Eminent Haste enduro mountain bike details and launch

The heart of the bike is the rear end’s patent-pending design. We’re fans of the floating shock design as it typically delivers a very plush, sensitive ride. Here, the upper shock mount attaches directly to the seatstays, so there’s no additional rocker arm to introduce complexity or potential flex. At the bottom, it mounts directly to the chainstays, behind the main pivot, letting the shock “float” inside the rear triangle.

It’s called AFS (Active Float System) and it let them design the axle path and leverage ratio they wanted for more traction, better bump absorption, and reduced rollover resistance.

Eminent Haste enduro mountain bike details and launch

At the back is the fourth “bar” in the system, which makes for a floating brake design. They say this completely eliminates braking forces from affecting the suspension, so you have fully active use of all your travel on hairy descents.

Eminent Haste enduro mountain bike details and launch

Other unique touches include an internal post clamp mechanism, which is rare on mountain bikes. They ran it all through the industrial design filter and wanted something that looked and functioned well, rather than just sticking to the status quo for no other reason than that’s what people were used to. The one caveat is that the seat tube is split to make room for the shock to pass through, so it requires externally routed (non-stealth) dropper posts.

Eminent Haste enduro mountain bike details and launch
All photos c. Eminent Cycles.

A carbon fiber bash plate protects the downtube and hides the cable exit ports as they pass from the front triangle to the rear. It’s equipped with ISCG05 mounts, BB92 PFBB, and angular contact Enduro bearings with double labyrinth seals in high load areas. It’s Side Swing front derailleur compatible, has Boost axle spacing, and fits a Metric shock.

Eminent Haste enduro mountain bike geometry chart

Equipped with a 170mm fork, the bike is designed with endure-style riding in mind. Complete bikes start with one of three packages running from about $5,070 to $6,600. Customizations and changes will bring it up or down from there.

Check their website to build one out or see animations of their suspension in action.

EminentCycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

15 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Tim
Tim
6 years ago

Amazing looking bike. Shame about the press fit bottom bracket.

Seraph
Seraph
6 years ago
Reply to  Tim

Press fit is actually pretty cool if you’re not a hack.

Maus Haus
Maus Haus
6 years ago

Recently installed a threaded center PF30 BB in my Cannondale road frame and the creaking is finally GONE! Either way, threaded BB’s are the answer.

Exodux
6 years ago

Nice bike, would like to demo one. One question in regards to the dropper seatpost routing, why not just run the cable up through the interupted seat tube? Other than that, it looks like it checks all boxes.

Foolcyclist
Foolcyclist
6 years ago

Looks similar to the old Lawwill designs, but with a floating mount.

Jerome Roy
Jerome Roy
6 years ago
Reply to  Foolcyclist

the Yeti Lawwill had a floating mount…

Ol' SHel'
Ol' SHel'
6 years ago

Just to correct one thing:

The shock is actuated by the upper link, just like a 4-bar or faux-bar. In this case, the link reaches all the way back to the stubby seatstay/dropout. Unless it uses an extremely over-leveraged ratio, then there’snothing about it that would be inherently more plush than another design.

Carbon may solve the issue, but the Lawwills have always been torsionally flexy.

Frippolini
Frippolini
6 years ago

Would be interesting to see their investment figures. Reading between the lines it’s clear that this didn’t come cheap. I wonder how many bikes they need to sell to cover their startup costs.

Otherwise the bikes looks great and I wish them all the luck to break into the competitive cycling industry. Always nice to see people to realize their dreams and goals with cash and hard work. 🙂

Gregor
Gregor
6 years ago

Mondraker with four bar crazy. Give it a few years to refine the design. I love how the floating designs work. Keep on.

MIrwin
MIrwin
6 years ago

I would guess the droppers are limited to 125 mm based on those short seat masts and external routing?

Richard
Richard
6 years ago

It’s a Mert Lawwill RS-1/Straight 8

will
will
6 years ago

More like the Schwinn 4-banger visually…

robert
robert
6 years ago
Reply to  will

i was thinkin’ schwinn straight 6, but yeah.

Technician
Technician
6 years ago

Impressive start. Kudos to Eminent for doing it right.

Fabricio
Fabricio
6 years ago

Why a frame with a semi internal routing for a seat post just for a part of the length in the top tube and after going for a external ???? weird

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.