Home > Bike Types > Mountain Bike

First Look: New Santa Cruz V10 Gets Official with 27.5″ Wheeled V10.6

12 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Santa Cruz V10.6 new downhill bike (12)

Santa Cruz seems to have a thing for Christmas parties featuring their V10 downhill bike. Last year the company used the opportunity to introduce a special Greg Minaar Replica Edition, and this year? The 2014 party featured the launch of their all new V10.6. Rolling on 27.5″ wheels, the new V10.6 is the same bike that clinched the 2014 World Cup Title as well as a World Champs medal.

Now with bigger wheels, 216mm of travel, and adjustable geometry, the V10.6 is also available in two different carbon layups with the high end Carbon CC and more affordable Carbon C. Combined with a Shimano Zee build kit, the Carbon C V10.6 brings Santa Cruz downhill performance down to a more affordable level thanks to a slightly heavier, lower modulus carbon build.

Santa Cruz can’t guarantee you’ll ride like Bryceland on the new bike, but if you do land that huge huck to flat, you know the bike is good for it….

New Santa Cruz v10 down hill mountain bike 27 (5)

Featuring a full carbon frame and swingarm, the new V10.6 relies on proven VPP suspension performance only without the 10 inch suspension mode. Instead you find 8.5″ of travel with adjustable geometry that in the high setting offers a 64º headtube angle and 360mm high bottom bracket which switches to 63.5º and 353mm in the low setting. The rear shock has also been tuned to be less progressive for more consistent damping through the entire travel.

Santa Cruz V10.6 new downhill bike (15)

Santa Cruz V10.6 new downhill bike (4) Santa Cruz V10.6 new downhill bike (3)

Santa Cruz V10.6 new downhill bike (8)

Additionally you’ll find a slightly longer reach but with the same length chainstays as the previous model all based on feedback form Peat, Minaar, and Bryceland. As with most new carbon releases, the frame includes bigger tubing with the carbon layup optimized for increased strength and stiffness.

Santa Cruz V10.6 new downhill bike (9)

Santa Cruz V10.6 new downhill bike (18) Santa Cruz V10.6 new downhill bike (17)

Santa Cruz V10.6 new downhill bike (11)

To ensure the bike will hold up to repeated park runs, the VPP suspension includes familiar touches like double sealed pivots, dual grease ports on the lower link, and angular contact bearings with collet axle pivots. Further frame protection is provided through integrated fork bumper/cable guides, molded rubber swingarm and downtube protection, and a molded clip on chainstay/upright protector.

Santa Cruz V10.6 new downhill bike (14)

Santa Cruz V10.6 new downhill bike (6) Santa Cruz V10.6 new downhill bike (7)

New Santa Cruz v10 down hill mountain bike 27 (4)

Most riders should be happy to see the frame continuing with a threaded bottom bracket, while the rear end is speced with a 12x157mm spaced thru axle. Along with the ISCG-05 chainguide mounts, the CC complete version includes a SRAM X01 DH 7 speed drivetrain with Raceface SIXC carbon crank, SRAM Guide RSC brakes, DT Swiss Wheels and a Fox 40 R Float RC2 Factory Kashima fork with a Fox DHX RC4 Factory Kashima rear shock. Complete CC bikes start at $8799, while CC frames retail for $3599 with either the Fox DHX RC4 or Rockshox Vivid R2C. Available in Black or White.

New Santa Cruz v10 down hill mountain bike 27 (2) New Santa Cruz v10 down hill mountain bike 27 (3)

The more affordable Carbon C model is also available in black or white, and starts at a more attainable $5699. Build highlights include a 10 speed Shimano Zee drivetrain with SRAM Guide RSC brakes, a Fox 40 R fork, DHX Rc2 rear shock, SRAM Descendent crank, and Easton components to round out the cockpit.

Both models will be sold in S-XXL sizes with 22.44 – 26.86″ top tubes. For more geometry details, head over to the Santa Cruz website.

 

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

12 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Bro Cephus
Bro Cephus
10 years ago

I wonder how it climbs?

taylor
taylor
10 years ago

No internal routing?

meh….

gerald t.
gerald t.
10 years ago

internal routing sucks… if you actually ride and maintain your bike. Good work SC.

wheelz
wheelz
10 years ago

Agreed, internal routing sucks. I don’t think it even looks good on DH bike. Would love to own the new V10.

JBikes
JBikes
10 years ago

Internal routing on a MTB does suck. It’s for aero, not looks. Function before form.

WG
WG
10 years ago

SRAM and Fox on a single bike? It’s not something you see very often.

abc
abc
10 years ago

+1 for internal routing and maintenance for MTB. External routing is where it’s at if you’re your own mechanic.

Von Kruiser
Von Kruiser
10 years ago

Internal routing is the worst.

Ad
Ad
10 years ago

No weights?

Sanchez
Sanchez
10 years ago

External routing AND threaded bb. Thank you.
Innovation is good for marketing and whatnot, but Im glad a company listens to the public and THE PEOPLE WHO WORKS ON THE BIKES.

Tom
Tom
9 years ago

I’ve gotta disagree with the internal routing haters, the routing on the nomad is beautiful to use, and if it could have been implemented properly would have been nice. However I assume it would have been heavier.

More importantly, why still the dual grease ports rather than the single a la nomad? Equally shame they couldn’t get the axlepath/leverage ratios they wanted whilst still hiding the lower vpp link.

peter
peter
9 years ago

clearance on the rear wheel looks really tight. looks like mud would be a problem.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.