When your brand is seemingly built around mountain bikes of a particular wheel size, how do you grow beyond that? Sure, Niner’s teased a downhill program during the launch of the new WFO9, but otherwise they have a bike that fits virtually every major category.
The answer is to simply turn left. To take a new road. One that may be less traveled but is becoming more and more popular. All of us continue to seek new adventures (or at least I hope you do), and sometimes you’ve got to stretch your perceptions of yourself a bit to cover new ground.
I asked what led the decision to branch off from mountain bikes, and Niner’s cofounder Chris Sugai had this to say:
“Not every rider has access to perfect singletrack, but many people have vast networks of dirt roads to explore and train on. We want to contribute to making that experience great. Niner is about making the best off road bikes available – we’ve applied our experience making great carbon forks and high end alloy frames directly to the RLT 9 project – we think riders are going to be very pleased with the ride quality and functionality as well as the Niner signature touches such as the geared and singlespeed functionality.”
What he left out was that everyone at their office (and ours) totally wanted one. Grind past the break to see why…
The RLT9 is quite simply an “all road mountain bike” that’s designed to tackle epic cyclocross races like the Iron Cross and Southern Cross as well as endurance gravel grinders and monster cross showdowns. The hydroformed frame uses a tubeset similar to the AIR9, giving it aesthetically pleasing structural shaping.
Shift cables run internally, entering the frame through new entry port grommets that’ll work with mechanical and electronic drivetrains. There’s an auxiliary port on the seat tube near the front derailleur for Di2/EPS systems, otherwise the front shift cable pops out just under the BB and comes around to meet the front derailleur.
The rear shift cable pops out at the same spot and runs housing all the way back to the derailleur. The design offers reasonably easy installation and safekeeping from mud and grit. If you’re running Di2/EPS, wires will run internally to the rear derailleur, and frames ship with plugs installed on all wiring holes not shared with mechanical drivetrains.
Rear brake housing runs externally along the bottom of the downtube.
Fender mounts are built into the frame and fork, letting the bike double as an aggressive commuter…assuming you commute without racks.
The frame uses a Pressfit 30 bottom bracket. What’s not shown here is a new BioCentric 30 bottom bracket. Built similar to their two-bolt BioCentric II EBB, it allows you to run a standard 24mm or 24/22mm GXP crankset in the PressFit BB30 frame and adjust chain tension when set up as a singlespeed bike. That keeps the rear dropouts much cleaner:
The dropouts are custom forged pieces with hollowed out sections to save weight. The non-drive side integrates a minimalist brake mount. Note the fender mounts set back and above the rear axle. Speaking of which, the frame is built around a standard 135mm QR rear axle.
