Home > Clothing-Gear-Tools

Found: Siren Bicycles Fred Bars Back For A Limited Run

11
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Siren Bicycles Fred Bar

Siren Bicycles made the first Fred Bar back in 2008 for a rig being used in the Tour Divide.  What exactly is a Fred Bar?  Well, it’s a short flat bar that clamps to the steerer tube above your stem.  It affords the rider new hand positions, plus allows for the addition of aero bars to your mountain bike.  This isn’t a product for everyone, and Siren knows that, which is why each production run is pretty limited.  If this add-on fits your needs however, drop them a line here to get your own.  Cost should run about $90 but may vary.

Tuck past the break for an image of the Fred Bar in use.

Siren Bicycles Fred Bar Setup

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

11 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Mario
Mario
9 years ago

Prefect fixxie steerer

also podium

ChrisW
9 years ago

When touring, I use drop bars with clip-on aerobars for an additional and comfortable position when doing long hauls in the saddle. I also like to use a bar-bag to keep my essentials and valuables in. Unfortunately, the aero-bars and bar-bag are designed to mount in the same position on my bars, so finding a good setup to combine them is difficult. This could be a nice solution, but I’d want to mount the bar-bag on the Fred bars installed UNDER the regular stem and bars. Has anyone tried such a setup? Maybe the bar bag would end up too close to the frame and/or interfere with derailleur cables.

stato
stato
9 years ago

As an alternative try sjs-cycles (UK), they do an accessory bar which is very similar but much cheaper. Stack height is a little taller tho.

Eddie O
9 years ago

The benefit here seems to be (I have not tried them yet, but now that they are available again…) raising the aero-bars up a few cm and allows for the aero pads to be set back slightly as well. When applying aero-bars to mtbs for ultra races those are two issues I’ve run into with fitting clients: the aero bars are too low and too far forward essentially pulling the rider off the saddle or forcing them to rotate their hip and flatten the spine to reach the aero bars. Aero bars on the mtb are more for removing the weight from the hands vs getting aero as one would thing about with TT or tri. A secondary benefit of course is freeing up space on the handle bar to attached bags, lights, gps, etc. Looking forward to testing these.

JamesG
JamesG
9 years ago

When I was setting up my bike to ride the GDMBR in 2012 I had to fight and fight to get my handlebar bag, my aero bars, and my odometer with my limited handlebar space. Even after I finally got everything on my aero bars were too far forward and too low even after using a shorter stem, just like Eddie O stated. I would have loved to have something like this. Maybe I will have to buy one the next time I head up to Banff!

topmounter
topmounter
9 years ago

I’m surprised that no one has asked how much do they weigh and is there a carbon fiber version coming yet.

greg
greg
9 years ago

how much do they weigh? is there a carbon version coming?
is it compatible with my campy seatpost?

Seraph
Seraph
9 years ago

Aero bars on my Solo, here I come!

DaleC
DaleC
9 years ago

When I saw the pic, I guessed it’s purpose was to give touring riders additional bar space to mount lights, GPS, iPhone, etc…

Mat
Mat
7 years ago

what is the width in mm?

G
G
3 years ago

6061 Aluminum clamp and Bar
Heat treated to a tensile strength of more than 42,000psi.
CNC Clamp
Anodized Black
133 grams
Bar width is 17.145cm (6.75 inches)
Made in the USA. Denver, Colorado to be specific

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.