SONY DSCWe know, we know: how much improvement can a pair of grips boast?  Well, Easton had a look around the market and–as one of the largest sellers carbon bars around–found it lacking.  In particular, they found that the design of most of the lock-on grips on the market weren’t particularly kind to carbon or lightweight bars.  They also found that the commonly-used Kraton material lacking in terms of abrasion- and UV-resistance.  The result is these handsome (sorry) grips in six colors and two diameters.  Hit the jump for more!

SONY DSCEaston’s main innovation here is a clamp that grabs the bar through the grips’ base plastic.  This keeps the hard aluminum away from the bar, preventing stress risers.  Both inner and outer clamps sit below a layer of grip material, which should keep them comfortable and add a bit of security at the bars’ ends.  In addition, the outer clamps are closed to further protect the bars.

SONY DSCThe elastomeric polyurethane grip material was chosen by Easton for its combination of “advanced cushioning properties” and improved resistance to abrasion and ultraviolet light when compared to commonly-used rubbers.  The palm area is densely padded and minimally textured while on the far side grip and control are provided by raised text.  Lest the rider forget their grip brand, the Easton logotype appears roughly 70 times per pair of grips.

On the bike, the 30mm, 104g (actual) grips are slim but comfortable and the dense palm area does feel like a nicely broken-in grip.  The clamps are nicely machined and their covers a nice touch.  In addition to our slim pair, a 33mm diameter is available for those looking for a bit more comfort.  Grips with clamps are available in the US this month at a reasonable $25.  Check back after a few months for a proper long-term review…




  1. Sevo on

    FINALLY….because you know I’ve broken soooo many carbon bars over the last 10 years right at the grips because of poorly designed grips. Thank you Easton for making something I totally don’t need.

  2. Sardinian rider on

    Stop bashing. I hate to leave marks on my carbon bars,both from handles or stem. These things are a very welcome addition among the hundreds of other useless bike kits you’ll find yourself wanting. On top of that I have a thing for everything Easton !!

  3. patrik on

    Noble, no doubt. But quick: raise your hand if your current lock-on grips caused a catastrophic failure that caused you to exclaim, “Dammit, I need a lock-on grip that works better on my carbon bars!”


  4. Chunky on

    A solution to a problem that doesn’t exist.

    Maybe a new handlebar standard is needed once the 650b circus has calmed down.

  5. Tim A on

    So Easton has come up with a grip that they hope is comfortable, good-looking, and long-lasting. At the same time, they’ve gone out of their way to save your sorry a**es from maybe scoring your expensive carbon bars. And they’re cheaper than ODIs.

    That’s offensive how?

  6. alloycowboy on

    So you just spend over a hundred clams on a light weight carbon bar to shave weight on your ride only to put all that weight back on with bolt on grips! Is Easton serious? Have they not heard of Scott Grip glue available at most motorcycle shops?

  7. Eli on

    Working in a shop, I’ve seen AT LEAST a dozen bars that broke (most while being ridden) because people over-tightened their grip and ruined their bar.

    The problem doesn’t lie in the bars or grips, its lies in the idiots not checking their specs.

    For some people, gluing a grip on and riding your bike for five years is fine. Others (myself included) change out their cockpit sometimes and its nice to know I’m not going to ruin my fancy bar swapping to SS for the winter.

  8. MaLóL on

    well done Easton. next thing, try to make the grip less ugly.

    Esi grips, the one and only grips out there. All the rest is crap in comparisson.

  9. Fabricio on

    Never had problem with my Ruffian and my carbon bars, different brands, include Easton, if you want to reduce the torque used to tight them, just place some carbon specific grease between the grip and handlebar (I use the Finish Line, no adds for them here) it can reduce until 30 percent of torque and still tight very well.

  10. Brian on

    Most sh*t comes to market these days with no excuse at all other than pretty colors or new model year. More choice is always a good thing. Why’s everyone so down on these?

  11. Chris on

    @Brian – Why are people down on these?
    This is Bike Rumor. The site’s great, but the commenters come to talk trash. Some products I just skip to the comments for a chuckle. Sooooo negative about everything. Great fun.

  12. vhom on

    I just wished they made it like ODI’s rogue. I’m one of those people who are always moving my hands around the handlebars. But I’m really liking my current set-up with the ESI Chunky. That’s the ultimate damping setup with a carbon bar.

  13. Eric@505 on

    @Chris, @ Derek:
    Ditto, me. There are certain postings where I always skip straight to the Comments (see especially anything Specialized, Budnitz, or KickStarter related). ; )


COMMENT HERE: (For best results, log in through Wordpress or your social media account. Anonymous/fake email comments may be unapproved or deleted. ALL first-time commenter's posts are held for moderation. Check our Comment Policy for full details.)

This site uses Akismet to reduce spam. Learn how your comment data is processed.