Home > Event Coverage > Eurobike

Mad Fiber Updates Hub Internals, Goes 11-Speed

Written by Tyler Benedict
13 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2013 Mad Fiber road wheels one-piece carbon fiber spoke goes into production and gets new alloy freehub body and axle for Shimano 11-speed compatibility

Last summer, we saw an early version of Mad Fiber’s new one-piece driveside rear spoke. As in, the entire group of spokes is one piece. This eliminated the crossed spokes from the originals and reportedly did away with any creaking noises riders were hearing.

The news from Eurobike is that this design is finally in production, and they’ve swapped to an alloy freehub body and axle that’s Shimano 11-speed compatible. They’re no longer using White Industries hub internals. Full pic of the wheel below…

2013 Mad Fiber road wheels one-piece carbon fiber spoke goes into production and gets new alloy freehub body and axle for Shimano 11-speed compatibility
Tyler Benedict
11,282 articles

Tyler Benedict is the Founder of Bikerumor.com, where he’s been writing about the latest bikes, components, and cycling technology for almost two decades. Prior to that, Tyler launched and built multiple sports nutrition brands and consumer goods companies, mostly as an excuse to travel and ride in new places.

Based in North Carolina, Tyler also loves the Vanlife & family adventure travel and is always on the lookout for the next shiny new part and off-grid adventure.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

13 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Alex
Alex
12 years ago

Are there unidirectional fibers sandwiched into the spoke lay-up somewhere? It looks like the spokes are all made of fibers running at 45 degrees to the spoke load (in tension).

0
Reply
Tim
Tim
12 years ago

Alex, according to their website:
“Mad Fiber spokes are five-ply carbon ribbons–­what most people would describe as blades. The two outermost, visible layers are a 12k carbon weave; the inner plies are unidirectional, with the fibers oriented at nearly 0 degrees to carry the spoke tension. They are extremely overbuilt, capable of withstanding more than 40 times the load they’ll see in even the most extreme riding conditions.”

0
Reply
dodin
dodin
12 years ago

I have a set of these (finally) and love them. Super stiff, light, and somehow comfortable.

0
Reply
gary
gary
12 years ago

Have a set of tubulars. These wheels rock. Visually impressive and performance more so. Unbelievable. Traditional wheel design seem like model T’s in comparison

0
Reply
Marceire
Marceire
12 years ago

Agree, these wheels are great fun. I previously ran a set of 404/303 Alu braking track Zipp clinchers. In comparison the MFs (clinchers also) feel waaaay racier and livelier. They do twitch a bit in strong side-winds, but the effect is more disconcerting than actually dangerous. Another great bonus is the extremely smooth braking and nice modulation curve of their pads + wheel combo. They look great too and are a real conversation starter. If anyone knows where to get tubeless valve stems that fit, post the info here.

0
Reply
brian
brian
12 years ago

Has anyone ever seen a wind tunnel comparison of these? I’m curious how they compare to other industry competitors.

0
Reply
Mobydick1969
Mobydick1969
12 years ago

I have ridden about 400 miles on a set of the old MF design wheels with the old spoke layup and about 600+ miles on the new wheels ,the new design is silent the older ones were super loud under any kind of pressure
these wheels are just amazing climb n accelerate like northing else make a brilliant Woosh Woosh noise when you are carrying serious speed
the only downside having to answer questions from everybody who see them + not a fan of the graphics de-sticked mine as soon as I got them
Yeah they do make every other wheel look very old fashioned
as for tubless valve stems the MF ones work fine as do Bontrager 100mm ones
over n out from Cornwall UK

0
Reply
Psi Squared
Psi Squared
12 years ago

As for wind tunnel data, I’ve not seen any but I suspect given their cross section, their wide spokes, and that very tall, unusual rim nose that they’ll likely do very well in no wind or with a headwind. In cross winds, I suspect they’ll be sub-optimal at best.

0
Reply
Ciclismo
Ciclismo
12 years ago

@PSI Squared

Side wind isn’t really a factor for cyclists, most of the wind comes from +-15 degrees at 40km/h (according to some guy at some big stand at Eurobike last Saturday). And, subjectively, I don’t feel the headwind as much as I do notice the weight of my bikes when I switch between them. And I’m not just talking the wheels up because the guys from Mad Fibre gave me a free t-shirt.

0
Reply
Psi Squared
Psi Squared
12 years ago

@Ciclismo: Uhm, a wind at 15° is a crosswind by definition. Wind and specifically drag, have a much greater effect on your ride than the weight of your bike.

0
Reply
Meta
Meta
12 years ago

MadFiber please release a shallower model. Thanks.

0
Reply
Patrick Anderon
Patrick Anderon
9 years ago

Ihave a pair of the 2013 wheelsets with a 10 speed SRAM hub and changing my group set to SUper Record Campy. The problem is that Mad Fber is no longer is business and I cannot seem to locate a campy hub. Does anyone know where I can get a 11 speed Campy Hub that will fit?

0
Reply
ryan
ryan
6 years ago
Reply to  Patrick Anderon

im in the exact same boat! from calling around the only thing I can find is that they went from white industries to “somewhere over seas”. the search continues…

0
Reply

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.