Home > Bike Types

Wolf Tooth Rear Axle is machined to save and protect frames inside or out

9
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Citing a need to create more than just a replacement axle, Wolf Tooth Components has come up with an interesting combination of replacement caps for both sides of the axle. While one cap is there to protect your frame in the event of a crash, the second pair of caps are there to provide a perch when you need it for your indoor trainer – and gone when you don’t.

Replacement rear thru axle with axle cap for frame protection or trainer caps for indoor trainer use.

Technically, there are three different ways you could use the new WTC Rear Axle. For the lightest, simplest option, the 12mm thru axle can be used on its own. Machined from 7075-T6 aluminum, all of the axles have a captured stainless steel washer under the head to reduce friction on the frame when you’re threading it in with a 6mm hex key.

Replacement rear thru axle with axle cap for frame protection or trainer caps for indoor trainer use.

For protection on the trails, WTC offers a non-drive threaded axle cap which is made from 6061-T6 aluminum. These have a threaded interface that mates with the inside of the axle shroud and thread in place with an 8mm hex key. WTC says that they were developed once they learned how much the QR lever from a thru axle actually protects the frame in a crash. Tooled axles are lighter, but the lack of anything protruding from the frame means there is no chance of the axle taking the brunt of the impact, instead the chainstay or seatstay end up scratched or damaged. In this case, the simple 4g caps add a bit of protection with hardly any weight. They’re also available in eight colors because that makes your bike faster.

Replacement rear thru axle with axle cap for frame protection or trainer caps for indoor trainer use. Replacement rear thru axle with axle cap for frame protection or trainer caps for indoor trainer use.

Then there’s the set of trainer caps which are designed so that you can use your bike for, well, indoor trainers. The non-drive cap threads in like the Axle caps, but the driveside uses a tool-free plug with o-ring retention. These are a bit heavier at 12g, and are made from 7075-T6 aluminum to hold up to the pressure of being mounted in a trainer. Technically, you could use the non-driveside cap outside just like the Axle caps, but it’s a bit more bulky and only available in silver. WTC says that the standard Axle caps aren’t big enough to fit some trainers, which is why there are two separate versions.

Replacement rear thru axle with axle cap for frame protection or trainer caps for indoor trainer use. How to measure your rear thru axle Replacement rear thru axle with axle cap for frame protection or trainer caps for indoor trainer use.

Currently, the WTC Rear axles are available in 9 of the most common sizes with 12mm diameters and varied thread pitches. WTC’s Rear Axle Measurement Guide will help you figure out what axle is needed for your bike – if it’s one of the 9 currently available. Sizes include axles for 142mm, 148mm Boost, 157mm Super Boost, and 177 and 197mm fat bikes.

Pricing is set at $39.95 for each axle, $9.95 for single Axle Caps, and $19.95 for a set of Trainer Caps. As always, all of the products are made in the U.S. and available now.

wolftoothcomponents.com

 

 

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

9 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Joenomad
Joenomad
4 years ago

Is WTC planning on making a matching front 12mm axle? They only show a 15mm fork axle available on their website.

Dude on a bike
Dude on a bike
4 years ago

Just like fork sliders on street bike motorcycles. Maybe not a huge need for MTB but a piece of mind for sure.

Celest Greene
Celest Greene
4 years ago

Don’t really need another axle choice but those trainer pieces are a nice touch.

JBikes
JBikes
4 years ago

I’ll buy this as its the first one I know of with the captured washer on the bolt head.
Ultimately I really just need to get back on a metal framed bike.

Ricky Bobby
Ricky Bobby
4 years ago
Reply to  JBikes

My Chromag’s leverless Maxle has a washer under the head.

deruneinholbare
4 years ago

To remove the wheel, do you first have to unthread the caps with a 8mm allen key, and then unthread the axle using the 6mm?

WT Mike
4 years ago

The cap end (non drive side) uses a 5 mm hex that is easily accessed with the cap in place. The drive side accepts a 6 mm hex key. The drive side cap is only for use with a trainer and it is not threaded, it slides in place.

typevertigo
typevertigo
4 years ago

That is a nice development. I have a Minoura LR340 turbo trainer that’s meant to work with bikes with QR dropouts, and these new TA end caps look like they’ll work with its clamping interface just fine – no need to replace an otherwise good working turbo trainer. Kudos WT!

Eli
Eli
4 years ago

Shame they couldn’t get the non drive side to stick out farther to help protect the derailleur.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.