Home > Other Fun Stuff > Actual Weights

World Cup XC, Pro Bike Check: Unior Tools Team Trek Superfly of Tanja Žakelj

18 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

XC_mountain-bike_World-Cup_Nove-Mesto_Tanja-Zakelj_Unior-Tools-Team_Trek_Superfly_complete

One of the smaller teams to make big headway over the last season at the World Cup level was that of Unior Tools with the outstanding consistency in cross country racing of Slovenian Tanja Žakelj. With two junior and one U23 world championships in her past, Žakelj’s highest finish last season was a 2nd place in Windham, but by riding in the top 10 all season she started this year ranked 3rd. She has yet to break into the top 10 at the first two rounds of this year’s World Cup series, but has a few weeks off before the next cross country races to work on her form.

We’d been talking to Unior Tools about testing some of their European-made tools that show up a lot in the pits of World Tour races, so were happy to drop in for a chat with Unior’s pro mechanics and team manager. The gave us the low-down on  Žakelj’s bike, but also on some standout tools from the Slovenian company.

Have a look at a few custom setup tricks from her mechanics after the break on an otherwise fairly stock ride…

XC_mountain-bike_World-Cup_Nove-Mesto_Tanja-Zakelj_Unior-Tools-Team_Trek_Superfly_racing

Even though we saw the unlabeled IsoSpeed hardtail and reboot of the Top Fuel under the Trek Factory Racing Team riders last week, the racers on all of the other top Trek-sponsored teams are still riding the current bikes. Unior Tools is one of those, with their racers aboard standard Superfly carbon hardtails.  Žakelj’s small sized bike was set up with a SRAM XX1 drivetrain, carbon Rise 60 wheels, and Schwalbe Racing Ralph rubber.

XC_mountain-bike_World-Cup_Nove-Mesto_Tanja-Zakelj_Unior-Tools-Team_Trek_Superfly_SRAM-XX1-direct-mount-28T-chainring XC_mountain-bike_World-Cup_Nove-Mesto_Tanja-Zakelj_Unior-Tools-Team_Trek_Superfly_custom-RockShox-RS1-graphics XC_mountain-bike_World-Cup_Nove-Mesto_Tanja-Zakelj_Unior-Tools-Team_Trek_Superfly_Lizard-Skins-grips_SRAM-Guide-RSC-brakes-Ulitmate-carbon-levers

Her Unior mechanics were quick to point out that they had built Žakelj’s bike with a 28T direct mount chainring in Nové Město to tackle some of the steep, slippery climbs. It was definitely the smallest ring we’ve seen on a pro XC bike, yet. The team gets custom Project One graphics on their frames, as do the RS1 forks with a custom team stripes decals. In addition to her thick 32.3mm Lizard Skins DSP grips, Žakelj gets a unique brake setup with the new SRAM Guide RSC brakes. Instead of using the standard aluminum levers that we saw on the bike of Kulhavý, hers were put together with the new carbon blades, making them an interim solution before larger quantities of the new Guide Ultimates are available.

XC_mountain-bike_World-Cup_Nove-Mesto_Tanja-Zakelj_Unior-Tools-Team_Trek_Superfly_complete-actual-weight_9-17kg XC_mountain-bike_World-Cup_Nove-Mesto_Tanja-Zakelj_Unior-Tools-Team_unique-Slovenian-tools

Several of the Unior support team come from a gravity riding background and sounded like they were wary of lightweight parts just to save a few grams, instead favoring a tried and true approach to component choice. That means that the team bikes don’t end up with the super tuned carbon bits we saw on a bunch of other pro bikes, or even the top level wheels. Instead they use proven tech, and with Žakelj’s bike still get it down to a respectable 9.17kg (20.22lbs) ready to race.

The team’s head mechanic went through his tool box with us to have a look at what they felt were some of the best offerings from the company for everyday use, and to suggest what we might try out. The shape of the T-handle hex and torx wrenches seemed to fit really nicely in the hand, and the build quality of the wire cutters seemed second to none. He even said he uses it to cut spokes out of wheels without any lasting wear. One other useful tool they had to deal with frequent drivetrain swaps is a new quick cassette puller, which replaces a chain whip. This XX1/XO1-friendly update includes longer pegs on the 12T side to reach over SRAM’s small 10 tooth, and has an 11T set of posts on the other side to make it fit any typical cassette with either an 11 or 12 toothed cog (including of course SRAM single ring options that have a 10, plus a 12.) Unior has been working on improving their US distribution, and looks to have made some good progress selling in the states with mostly black branded tool handles. We’ll take a deeper tool look at one of the next DH World Cups and see what we might want to try out ourselves to give our readers a deeper insight.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

18 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
R0b0tAt0ms
R0b0tAt0ms
8 years ago

They look identical to Park Tools.

Gummee!
Gummee!
8 years ago

The fact that they use the same blue as Park is the stumbling block for US distribution.

M

greasyphysique
greasyphysique
8 years ago

I wonder if they make them for Park and they are just rebranded as Park tools. It seems that is the direction they are going.

Marco
Marco
8 years ago

Is it me or 9.17kg is not light for a carbon race bike?. My alu superfly is at 11.3 and it does not have nearly this amount of high end components.

Steven
Steven
8 years ago

I would be interested to see how the how to wire cutters compare to Knipex wire rope cutters (Part #95 61 190)

clemson
clemson
8 years ago

Unior tool established 1919 ….way before Park Tool 🙂

TJ
TJ
8 years ago

These tools are very high quality and they do not make them for Park Tool. The fact they use blue plastic and rubber is unfortunate as Park has trademarked the blue color on all bike tools in the USA. Unior has a forging business and they also make auto parts.

George
George
8 years ago

Scale is off by 30%
Editor: Nope, the scale is fine. This is what pro’s bikes actually weigh with pedals, bottle cages, race numbers strapped on, and all. We give actual weights whenever we can, in stead of just spouting whatever marketing says they should weigh.

me
me
8 years ago

My 2010 spark is under 8.5kg…and I’m sure it rides better than that since is a Full.

Black not Blue
Black not Blue
8 years ago

They are selling in the US, as the article states, “…selling in the states with mostly black branded tool handles.”

josh
8 years ago

I call BS on the Spark being under 8.5 kilos or 18.74lbs. maybe weighing like some industry guys do. with out pedals tubes and tires.

Derek
Derek
8 years ago

@josh: 8.5kg isn’t that unbelievable. Here’s a Scalpel that would weigh under 8kg with pedals:

http://eliflap.it/2013/06/22/scalpel-ultimate-650b/?fb_source=pubv1/

It even have anything that exotic on it. A 2010 Spark is probably 26″ which would drop some weight as well.

@Marco: There’s a big difference between 11.3kg and 9.2kg, a bigger difference than 13.4kg and 11.3kg. Law of diminishing returns.

josh
8 years ago

@Derek Your link is claimed weight not actual weight and on your link your bike does not have pedals, or cages. Which is not rideable. My point again was at REAL weights, not bikes being weighed without pedals and such that you have to have on the bike to ride it. Which makes the weight on the bike you posted Bogus just saying

UniorTools
8 years ago

Thank you for all the kind words. We have been producing tools in Slovenia since 1919 and have the color blue as part of our brand for almost 100 years. There has been no plan to copy or mislead customers with the color blue. It’s the way we are.
And correct, we are not able to sell tools in blue in US, but they will become available in different shade anytime now. Be ready.

Derek
Derek
8 years ago

@josh: There is a scale shot in the last picture. Nothing “claimed” about it. Add 180g for Crank bros pedals. Another 30g for a bottle cage. Hence 8kg and not 7.76kg like it shows in the scale shot.

novembre
novembre
8 years ago

Unior tools were always great, I just love your chainbreaker. Greetings from Croatia.

Vincent
Vincent
8 years ago

What’s up seat post minimum insertion anybody?

George
George
8 years ago

Unior T- grip tools are way better tgan park. Many other as well. Serious tools for shop, are way cheaper and perform identical.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.