Home > Bike Types > Mountain Bike

All-new Santa Cruz Nomad 4 mountain bike changes up VPP design, acts like a DH bike

2017 Santa Cruz Nomad 4 mountain bike with V10 gravity linkage
8 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2017 Santa Cruz Nomad 4 gravity freeride mountain bike

At first glance, the all-new Santa Cruz Nomad 4 might look like a departure from their trademark VPP design. But, it is indeed using the Virtual Pivot Point suspension platform, but with a revised lower shock mount that mimics their winning V10 downhill bike. Combine that with coil-shock compatibility, 170mm of rear wheel travel, a much slacker head angle and you’ve got a top-shelf gravity bike perfect for the bike park. Throw in a steeper seat angle and full carbon frame, and suddenly it doubles as a trail bike cable of climbing to that next enduro stage, too…

2017 Santa Cruz Nomad 4 mountain bike with V10 gravity linkage

Thanks to the lower shock position, center of gravity and standover height are all improved. The top tube is extended and seat angle sits at 74.5º, putting you in a good position for pedaling. And you can tweak the geo with a flip chip on the linkage. One way keeps it high and tight (or, at least, relatively so for a long travel bike), and the other slacks it out to “near DH levels”.

2017 Santa Cruz Nomad 4 mountain bike with V10 gravity linkage

The carbon frame uses their usual quality build, offering models with the standard “C” level and the higher end “CC” carbon. In all, seven models will be offered, four with “CC” frames. All cables and hoses run internally on all of them, and all come with their lifetime warranty.

New Santa Cruz Nomad 4 mountain bike

The shock mount at the lower linkage houses the flip chip. You’ll have to unbolt the shock, so it’s not something you’ll want to do trailside for each ride, but the option’s there to set it for the type of riding you’re doing that day. Regardless of how much climbing you’re doing, you’ll want to make sure you get that front chainring selection right…there’s no concession for a front derailleur.

Beyond the suspension layout, it’s the finer details that set the Nomad apart from the rest of their trail bikes. The rear linkage is protected from spray and pebble throws by a small bolt-on fender.

New Santa Cruz Nomad 4 mountain bike

There’s the usual lower strike guard near the bottom bracket, too, plus a bolt-on tailgate protector for when you hang the front end off the back of your truck.

New Santa Cruz Nomad 4 mountain bike

The suspension is tuned to be linear throughout most of the travel, keeping it plush but supportive, with a progressive ending.

2017 Santa Cruz Nomad 4 mountain bike

Metric shock sizes ensure it’s compatible with the latest from Rockshox, Fox, etc.

2017 Santa Cruz Nomad 4 mountain bike

All models get alloy upper and lower linkages.

santa cruz bicycles grease port cutaway diagram inside look

The lower linkage uses their grease port with internal channels to direct it into the bearings.

2017 Santa Cruz Nomad 4 mountain bike

Other details include a max 27.5 x 2.5 tire size, 170-180mm fork travel, and a standard threaded BB shell.

New Santa Cruz Nomad 4 XX1 EAGLE mountain bike

The top CC model is the XX1 Eagle build, starting at $8,999 before options, including their new wheels (keep reading). For any model, you’ll have the option of this blue-ish “Ink” color, or “Tan”.

New Santa Cruz Nomad 4 XE XT mountain bike

The top C model is the XE build with Shimano XT and Race Face Turbine cranks from $5,899. Get started with a complete C bike at $4,499 with SRAM NX. Full specs and build options, including the bike customizer, on their website. CC Framesets are available with either Rockshox Super Deluxe Air or Coil springs fro $3,299.

2017 Santa Cruz Nomad 4 gravity freeride mountain bike

Reserve carbon wheels

At the top of the options lie two “Reserve” models that get the upgrade to their new house-brand carbon wheels:

Offering the same lifetime warranty as their carbon frames, the new Santa Cruz Reserve carbon wheels use their own rim design laced to Industry Nine Classic or DT Swiss 350 hubs with DT Swiss Competition Race DB spokes and Sapim Secure Lock alloy nipples. More than just an off-the-shelf co-branded carbon rim, these look like a decent upgrade.

They were designed, tested and prototyped in house using their new carbon lab with full-size heat press (check our HQ tour to see it!). The asymmetric rims get reinforced spoke holes to make them stronger where needed without overbuilding the entire rim and adding weight. Molding them on the outside let them ensure the extra material was exactly where they needed it, so spoke holes are centered in the mount.

Then they added material to the bead wall, making them a full 3.5mm thick, so reinforced against rock strikes. Insides are as pretty and smooth as the outsides thank to a melt-away wax bladder insert that allows good, even compaction without leaving wrinkles. The 1.5:1 width-to-height ratio, they say, provides the right balance of comfort and lateral rigidity.

For now, they’ll only be available as an upgrade option on the Nomad, which means only in 27.5″ sizes and a 3x lacing, 28-spoke build. But more are coming – note the models that will get them at bottom, along with aftermarket availability coming this fall (click to enlarge, below):

Hit their website for full Nomad spec and build options on each model.

SantaCruzBicycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

8 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
BLS
BLS
7 years ago

A baby V10!

JNH
JNH
7 years ago

VP Free Reborn! I am genuinely excited for the alloy version, too much crashing in my life for a carbon frame.

BT
BT
7 years ago

Yes, rebirth of the VP-Free/Driver8

Bogey
Bogey
7 years ago

A bicycle company using ID and OD instead of IW and OW is brutal. It is a width and not a diameter SC!!

BikeDave
BikeDave
7 years ago
Reply to  Bogey

Inner Dimension and Outer Dimension. When measuring material thickness in both drafting and machining these are commonly used.

Herberto
Herberto
7 years ago

It looks nice and all, but is it rude to say, that I loved their previous design better?!

Also, I shoulda never gotten rid of my 2011 Yeti ASR-7… It was a 7×7-inch trail bike at 31lbs-
too early for its time I suppose. Heh!

gringo
gringo
7 years ago

Say what you want, but this new frame layout is simply covfefe.

Alex
Alex
7 years ago

Look at the spec sheet on their site, I spy GX 12 speed…

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.