Home > Bike Types > Mountain Bike

2018 Fox shocks get completely retuned, forks get EVOL and more!

2018 Fox FLOAT 32 34 and 36 suspension forks
12 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2018 Fox FLOAT 32 34 and 36 suspension forks

Fox Racing Shox has had a big week, first with the all-new 36, followed by the new 32 Step-Cast AX gravel fork, and now the complete rework of their other forks and shocks.

As with the 36, the FLOAT 32 SC and 34 forks get bigger negative air chambers with the EVOL air spring. And if you notice in the pic above, there’s no more regular 32 fork being promoted. Fox’s rep says they’ll sell it for old bikes with options for 9mm QR dropouts, a straight 1-1/8″ steerer and 26″ wheels. But if you want anything more than that, you’ll either get a 100mm Step-Cast 32, or move up to the 34.

For EVOL, the amount of increased negative air volume varies by the fork, with longer travel forks seeing more of an increase. Regardless of model, though, the positive air chamber stayed the same, only the negative chamber got bigger. For some, this happened by simply decreasing the size of the top out bumper, and for others it meant reworking the layout.

 

For the FIT4 equipped forks, they also get an updated tune for more sensitivity with usual support. This is done by altering the shim stacks to make them more responsive to small inputs without flopping open to easily. Fox’s rep said it’s a natural progression based on continual testing and learning. That, combined with the EVOL’s more linear progression through the first 25% of travel, makes for a fork that’s far more sensitive to small bumps without flopping about in the rough stuff.

For 2018, the 32 SC forks get Factory and Performance builds, but the 34 joins the 36 with the all-black Performance Elite option because people wanted the murdered out look. So you get all of the best internal tech, just not Kashima coated stanchions.

2018 Fox Rear Shocks

For the rear shocks, each model gets updates, so we’ll bullet point those by shock first, then explain what it all means at the bottom of this post. When the metric shock sizing standards came into being last year, Fox made what OEM partners needed, but now that it’s taken root, they’re offering more metric and trunnion shocks as aftermarket options, too.

2018 Fox Float DPS rear shock with EVOL

The Fox FLOAT DPS inline air shock gets a new one-piece EVOL air can, which saves a few grams over the original two-piece sleeved design. This also lets them better tune each shock length and size for its intended application.

The Fox Float X carries over virtually unchanged.

The FLOAT X2 (above) and DHX2 (below), however, gets a redesigned air piston seal to reduce friction.

Save for the FLOAT X shock, all of them get a number of other internal updates that add up to big claims of improved performance. They are:

  • The DPS (Dual Piston System, which separates the lockout shim stack from the Medium/Open stack) changed the oil flow path to help it move through the shim stacks better in the Open and Medium modes, but provide a stronger lockout in Firm mode.
  • The ports and flow paths for the oil were also improved, helping it move more freely through the circuits. For smaller, lighter riders, this means the shock will feel more open and supple.
  • The Float X2 and DHX2 get a lighter oil, which gives it a more useable range, particularly in the Open setting.
  • In particular, the lighter weight oil won’t ramp it up as quickly, so it feels more linear.
  • There’s also more bushing overlap on rear shocks on trunnion and metric shocks, which helps them resist flex when suspension linkages put lateral or bending stresses on the shock body.

RideFox.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

12 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Mr. P
6 years ago

The one-piece EVOL air can is nice, as it should dissipate heat build up in the air chamber better than a dual sleeve design.

xc-fr
xc-fr
6 years ago

icd (or ird) is dead?

mech9
6 years ago

yes, live valve will take over.

steamed
steamed
6 years ago

Every Year Fox ist doing massive updates to there products. Why not just bring something to marked that works for a change? And that AX fork is a joke.

Penn Teller
Penn Teller
6 years ago

Is there any chance of a 120mm step-cast (or similarly light-weight) fork?

Shafty
Shafty
6 years ago
Reply to  Penn Teller

Don’t think we’ll see an SC fork that long just yet. It would require a casting revision I think. What XC racing bike is made for a 120mm 29″ fork? They already offer the 32mm in that travel, and it’s plenty light with NA2.

Simon
6 years ago
Reply to  Shafty

The Merida Ninety-Nine has a 120mm fork. The 2015 models were the last of these however.

The Magic Turtle
The Magic Turtle
6 years ago

No DPX? … Ops 😉

Chase
Chase
6 years ago

Just ordered my 2018 36 29er. in 20mm . Can’t wait.

Eddie
Eddie
6 years ago

Availability date for the new 34 evol?

FoxRider
FoxRider
6 years ago
Reply to  Eddie

30th May

Chris
Chris
6 years ago

So how can one tell the difference between 2017 & 2018 models for Fox 34 Float Factory forks?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.