The folding bike specialists at Dahon are mostly known for building small wheel, compact commuter bikes, but their new GB-1 breaks that mold. The new aluminum Gravel Bike #1 sizes up to mixed surface friendly 650b Road Plus wheels, yet still folds down into a relatively compact footprint to make it easier to travel to your next adventure ride.

Dahon GB-1 650b folding travel gravel bike

photos courtesy of Dahon

With 650b the GB-1 is set to get the largest wheels in the folding bike maker’s line-up. That’s a big step up for the company that mostly builds 16″ & 20″ wheeled bikes. But with the idea of opening up more freedom to ride on any terrain or road surface, the full size 27.5″ wheeled folding GB-1 opens up a lot more possibilities, whether it means taking up less space at home, or being more compact when traveling by car, bus, or train on your next adventure tour.

Tech features

Unlike most of their more compact bikes, the GB-1 uses a traditional diamond layout frame that splits in the front triangle. It does feature a dropped toptube with a strut at the seat cluster, a concession to improve standover. That’s so more riders will fit on the bike, as Dahon tends to make their compact folding bikes in a single frame size, making up fit differences in seat and bar adjustment. We’ll have to wait and see if the single frame size carries over for the production GB-1. Update: Dahon has now confirmed that the GB-1 will get three frame sizes when the bike hits shops later this year, to fit a broad range of gravel adventurers!

The folding front triangle is held in place with the same toothed smoothly integrated LockJaw joint system as their compact Clinch bikes. It looks to share a similar butted aluminum frame construction, with the folding mechanism leaving the rear end unaffected. Geometry-wise we have little info now, other than Dahon calling it “adventure travel inspired”, and promising “loads of tire clearance.” This pre-production bike was seen sporting a set of 27.5 x 1.75″ (42mm) Panaracer Pasela tires with decent clearance, hopefully enough for 47mm tires.

How to fold the GB-1

To break the new GB-1 down for travel, just drop the saddle with its quick release post clamp, fold in the pedals, and unclip the quick release Flatpack stem.

That unique new, open machined Flatpack stem when released allows the road drop handlebar to rotate within its stem clamp, allows the body of the stem to pivot up & down with respect to the steerer, and disengages the body of the stem so it can rotate freely of the steerer tube clap that remains securely clamped. There’s really a lot going on with that stem, pretty much disengaging in every direction with a single quick release clamping mechanism over the face plate!

To fold the frame, the LockJaw joint requires an Allen key to rotate the single locking bolt less than a full rotation in each the top & down tubes, at which point the bike simply pivots on the LockJaw hinge.

A wire loop foot attached at the bottom bracket supports the bike when folded, also protecting the front chainring, and helping the bike to balance upright when folded.

Tech details

The GB-1 sticks with a number of standard technologies that for the most part have been left behind on premium gravel bikes, but were likely selected to keep costs down, and maybe helping repeated folding for travel remain easy. The bike features quick release axles, a straight steerer fork, a threaded bottom bracket, and Dahon’s easy-to-manage full length external cable routing with housing sliding loosely through the slightly oversized looped cable guides for simple folding.

We’ve seen this prototype built up with a couple of slightly different 1x drivetrains and mechanical disc brakes. But the frame uses a round seatube and looks to have plenty of room around its threaded BB and driveside chainstay to probably fit a double chainring setup as well.

The frame also features rear rack mounts to expand on its mixed-use touring capabilities, and may be able to be set up with full fenders.

Availability

The GB-1 as we see it here is still technically being referred to as a prototype by Dahon. That said Dahon claims the bike will be available for purchase in late fall 2018, which suggests design is probably mostly set by now.

Update: The GB-1 has gotten some updated spec around its axles & stem. Check out the updates here.

Dahon.com

10 COMMENTS

  1. “The GB-1 sticks with a number of standard technologies that for the most part have been left behind on premium gravel bikes”…like…”a threaded bottom bracket”. That’s a win for Dahon!

    Looks like a cool bike.

  2. My travel bike — an Ibis Tranny 26er — fits into conventional (26x26x10″) luggage and avoids oversize luggage fees. Takes a while to disassemble for packing and reassemble at the other end, though. This option is attractive from that perspective — but what size luggage will it fit, and how much to ship?

    • I had one of these, you bring back the memories, I hadn’t thought about it in years. So stiff, so much carbon wall thickness on that thing. Great ride. Bit finnicky on the pack and unpack. Etap might help in the modern world. 29ers do fit in those boxes, but you have to really mush the tires flat.

  3. Neat, I’m fan of Tern and they have two platforms (Eclipse 26″ and Joe 27.5″) that can be pimped into cyclocross/gravel machines . Hopefully Tern see potential in this market and provide us with more alternatives.

  4. The plan is to have three frame sizes. Components will vary a little from the Proto in the pictures, but we are getting things done at Dahon to make this a real awesome travel gravel bike. Coming in fall to a shop near you!
    Thanks, Thor – Dahon USA

  5. They brought back the Cadenza, basically. Good. I have one and have ridden it everywhere, but it is a MTB frame and just happens to fit me with a drop bar, but having a frame designed around a road position from the start is certainly preferable.

  6. OMG! This is fantastic! However, I really wish they would’ve gone with thru axle mounts in the frame and fork. Thru axle technology is the standard now in disc road and man bike. Any bike I buy, either road bike or man bike, will have disc brakes and thru axles. So, it would’ve been nice if this Dahon would’ve had thru axle mounts on the frame and fork. Too bad.

    Dahon was close to what I want. I’m going to contact Tern to see if they would consider making a bike like this Dahon, but include thru axle disc mounts.

COMMENT HERE: (For best results, log in through Wordpress or your social media account. Anonymous/fake email comments may be unapproved or deleted. ALL first-time commenter's posts are held for moderation. Check our Comment Policy for full details.)

This site uses Akismet to reduce spam. Learn how your comment data is processed.