Home > Bike Types > Gravel Bikes

EB16: 3T Zero25 swaps seatpost offset, plus Pegoretti’s biggest canvas in limited Exploro

11 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

3T_Exploro-Pegoretti-Edition-LTD_one-of-a-kind-custom-painted-aero-gravel-road-bike_overall

OK, we couldn’t not lead with a photo of this new Pegoretti paint job on 3T’s new aero gravel Exploro frameset. We test rode the LTD version of the new bike when it was introduced back in June, and thought at the time that its super oversized frame tubes were really asking for a more striking paint scheme than its simple black and grey. In fact we preferred the white and red look of the more affordable layup bike. Well, 3T was having similar thoughts and has brought master bike painter Dario Pegoretti on board to produce one-of-a-kind designs for those with a willing wallet.

Now after that bike drew us in, 3T had a small component redesign that had us equally interested (maybe something to do with it costing less than 1/100 of that frame.) It’s easy to overlook those clever little tweaks that just make something work better. Such is the new Zero25 head design from 3T that makes their seatpost work with both a 0mm and 25mm offset without compromising design or functionality in either position. Take a closer look at how they do that below the crease…

3T-Zero25_0+25mm-offset-road-trail-seatpost_Team-carbon-shaft_head

The new Zero25 uses a reversible rail clamp that lets you position the head in either orientation to get the setback you need. Just line up the markings on the head hardware with the arrow printed on the non-driveside of the shaft of the seatpost to set it at either 0mm or 25mm of setback. The slowly tighten the conical hardware with the single bolt as you align your saddle position and you are good to go.

3T-Zero25_0+25mm-offset-road-trail-seatpost_Team-carbon-shaft_rail-clamp-guts

The way the hardware allows the top and bottom of the clamp to float as you tighten everything down, you also get the side benefit that the design works with most saddle rail profiles. It actually grasps and clamps the rails from the top outside and bottom inside edges making it compatible with round and oval rails of a wide range of sizes.

3T-Zero25_0+25mm-offset-road-trail-seatpost_Team-carbon-shaft_swap

While initially developed to help 3T and their partner shops trim the number of products they have to stock, the design also benefits riders who may want to move their position around on the bike, or could even swap posts between bikes of different geometries. The new Zero25 is debuting at 3T’s mid-range Team edition with an alloy head bonded to a carbon shaft and at the entry-level Pro in all aluminum.

3T-Zero25_0+25mm-offset-road-trail-seatpost_Team-carbon-shaft_0mm-position 3T-Zero25_0+25mm-offset-road-trail-seatpost_Team-carbon-shaft_25mm-position

The carbon Team seatpost weighs 202g in its lightest size and comes with red decals for $130/120€. A Team Stealth version with black on carbon graphics will also be available for $145/130€. The alloy post sticks with one-piece forged 7075 and tips the scale just a bit heavier at 222g. Best of all it will retail for just $100/90€.

Both levels will come in 27.2mm and 31.6mm diameters, 350mm lengths only, and should be available now. On the future outlook side of things, one of 3T’s engineers let slip that a LTD version was already in the development pipeline, currently undergoing some testing and refinement. Using an all carbon shaft and head, the Zero25 LTD will share the same alloy clamp hardware and trim the weight down even farther.

Exploro Pegoretti Edition

3T_Exploro-Pegoretti-Edition-LTD_one-of-a-kind-custom-painted-aero-gravel-road-bike_non-driveside-detail 3T_Exploro-Pegoretti-Edition-LTD_one-of-a-kind-custom-painted-aero-gravel-road-bike_headtube-detail

Now coming back to the limited edition Exploro Pegoretti. 3T wanted their oversized aero 650b/700c gravel bike to stand out at the show, so they asked Dario Pegoretti to have at it. Both were so happy with how the project turned out that they agreed to do a very limited few more. And there is certainly some technical merit to the bike’s tech which we detailed when it was introduced, but was also enough that it won a top Eurobike award last week as well.

3T_Exploro-Pegoretti-Edition-LTD_one-of-a-kind-custom-painted-aero-gravel-road-bike_frameset

3T wouldn’t say how many total for sure, but they talked about somewhere between 5-10 framesets being the most they expected to make to keep it super exclusive, with each being completely different. If you did the math correctly following along, you might have come up with what price range we are talking about here. 10,000€ will get you a unique one-of-a-kind design, hand painted by the Italian bike artist on what is claimed to be the fastest bike with knobby tires out racking up the gravel miles. That is certainly a premium, but it is on top of the already pricey $4200/4300€ frameset price of this 950g LTD frame, Luteus II LTD fork, and Charlie Sqareo post.

Here’s to hoping that it has a strong clearcoat to fend off all those flying stones. Get in touch with 3T soon if interested. They are taking orders now for delivery later this fall.

3Tcycling.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

11 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Pete
Pete
8 years ago

That convertible post head design, brilliant in its simplicity!

carlo
8 years ago
Reply to  Pete

mainly all the single bolt seatpost do this! don t need to wait for graphics to tell you!

Tom
Tom
8 years ago

I wonder what Pegoretti would charge to paint a random frameset? He might even like doing it, as he seems more about the artistry than the nuts and bolts of bike design/build

ascarlarkinyar
8 years ago

My 3 year old did the same paint job on the wall last week…

Heffe
Heffe
8 years ago
Reply to  ascarlarkinyar

Yes exactly! I would pay extra to have him leave my frame alone…

Tyler Durden
Tyler Durden
8 years ago
Reply to  Heffe

Have you ever seen a Pegoretti in person (I admit photos don’t do them justice)? I am usually a pretty simple person in terms of design and style – black with some fluo accents and I’m usually happy. That said, in college I worked at a shop that sold/built a few of his bikes. I would love anything painted by Dario. His eye for style specifically on a bicycle is second to none as far as I’ve seen.

Truthdealer
Truthdealer
8 years ago

My guess is that he did not.

Good Mythical Morning
Good Mythical Morning
8 years ago

I really like that seatpost design. It’s reminiscent of the clamp on the Specialized Droppers.

Prolapsed
Prolapsed
8 years ago

That paint job looks like it’s scratch and sniff.

Greg
Greg
8 years ago

Flippable hardware is nice, but a side bolt seatpost that doesn’t require different parts to mount different shapes of rails is fantastic.

opignonlibre
opignonlibre
8 years ago

That seatpost idea is neat…for a road bike. On a gravel bike not so sure. I haven’t been satisfied with one-bolt seatposts (Erikssen and Ritchey in my experience) on bikes made to be ridden on bumpy surfaces. Sooner or later the saddle will point upward or downward after you took a bit hit when not sitting exactly at the center of the saddle.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.