New WTC 6-Bit Key Chain & Axle Handle Multi-tools bring your tools along for the ride

You know those EDC key chain multi-tools that claim to have everything, but they’re nearly impossible to actually use? This isn’t that. Instead, Wolf Tooth Components has shrunk down their clever 8-Bit Pack Pliers into a key-chain sized tool that retains most of the functionality. And if you’re not one to carry much of a key chain, there’s also a new Axle Handle multi-tool as well.

6-Bit Hex Wrench Multi-Tool

WTC EDC multi-tool keychain 6-bit mini bit storage

The Six-Bit tool is pretty simple. Take their 8-Bit tool and drop two of the bits, and 6 of the 17 functions, and you end up with a tool that carries six bits with 11 functions. That includes magnetic storage for the 2, 2.5, 3, 4, 5, 6, and 8mm hex bits, a flat head #3.5 and Phillips #2 screwdrivers, and T10 & T25 Torx-compatible bits. Those bits fit inside the 8mm hex bit extension which is hinged to work as a straight tool, or 90º L-wrench.

WTC EDC multi-tool keychain 6-bit

The smaller design means it’s perfect for smaller tool wraps, pockets, or just use the optional keyring attachment to carry it on your keys–or anything you can attach a split ring to for that matter. The keyring attachment has a quick release feature so you can pop the tool off without removing the split ring. And when it’s attached to the quick release on the keyring, it prevents the bit storage area from opening, keeping your bits safe inside during transport.

WTC EDC multi-tool keychain 6-bit

Machined from 7075-T6 aluminum in Minnesota, the 6-Bit is priced at $39.95 for the multi-tool or $47.95 for the multi-tool+keyring attachment. Available now.

Axle Handle Multi-Tool

WTC axle handle multi-tool qr lever

Rather let your bike do the carrying? The new WTC Axle Handle Multi-Tool will do just that. This little 7075-T6 aluminum lever requires a WTC axle but it functions as both a quick-release lever to unthread the axle, or as a stand-alone tool.

WTC axle handle multi-tool

The tool includes four double-sided hex bits with 2, 2.5, 3, and 4mm hex, flat head #3.5 and Phillips #2 screwdrivers, and T10 & T25 Torx-compatible bits(these are the same bits found in other WTC multi-tools). The only catch is that the tool will only store two of the four bits. So you’ll have to choose which best suit your needs–or carry the other bits somewhere else on your bike or person.

The bits are stored inside the handle with strong magnets, and are removed by pushing down on one side, which pops up the other so you can pull them out.

WTC axle handle multi-tool in use WTC axle handle multi-tool in use

The Axle Handle tool can then be used on either side–bits on one side, and the fixed 5mm/6mm stepped bit on the other.

WTC axle handle multi-tool colors

This one is priced at $29.95 and is available in eight colors that will match other WTC anodized parts and accessories.

More Cerakote Cages

WTC Olive Cerakote ti cage

Last but not least, WTC has added another limited edition Morse Cage Ti with an Olive Cerakote finish. Only, these are a limited edition, and they’ve already sold out. WTC tells us that their limited edition colors often sell out in a few hours, so keep an eye out for future limited edition colors – and act fast if you want one!

WolfToothComponents.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

2 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Matt
Matt
4 months ago

Cool tool. Would be even more great if it had a 5Nm torque-wrench built in – would be super handy especially for the over-torquers. Might add too much weight though.

ShopMechanic
ShopMechanic
4 months ago

Love both of these tools! Really wish the axle lever didn’t have the t10 attached to the t25 though. If you have any SRAM parts on your bike a t25 is essential, but a t10 isn’t. Too bad the t25 isn’t paired with a 4 or 3 so that you could get 4 super useful bits rather than 3 + 1 very rarely useful bit (t10).