Home > Bike Types > Mountain Bike

New Santa Cruz V10 29er downhill bike looms large over Lourdes

prototype santa cruz v10 29er downhill mountain bike for greg minaar at Lourdes UCI world cup race
4 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

prototype santa cruz v10 29er downhill mountain bike for greg minaar at Lourdes UCI world cup race

It’s been rumored for a while, and there’s plenty of talk around the industry about 29er’s moving into the downhill realm, but now it’s real. The Santa Cruz V10 29er downhill bike will be raced at Lourdes this weekend by Syndicate team members Greg Minaar, Loris Vergier and Luca Shaw. It’s still very much a work in progress, but they’ve gone ahead and made carbon molds and production level front triangles for the team, but linkages and rear ends are still custom. And travel varies by rider size…

prototype santa cruz v10 29er downhill mountain bike for greg minaar at Lourdes UCI world cup race

The last time the V10 was updated was in late 2014 when it switched to 27.5″ wheels. Now it’s getting bigger, though they’re saying the 27.5″ model will remain in the line and still see race time. Minaar pushed the big wheels program, having raced a Hightower for enduro and posting some very fast times. So, they secured a prototype Fox 40 29er fork, modified a Hightower to work with it, and began testing. Using custom linkages and parts to work with the existing V10 front triangle, they got it dialed enough to go into quasi production.

prototype santa cruz v10 29er downhill mountain bike for greg minaar at Lourdes UCI world cup race

The new tire size created some clearance challenges. So, shorter riders on the team will make do with 190mm of travel, while Minaar’s XXL frame gets a full 210mm. The rear shocks were tuned and limited (or not) as necessary for each travel level.

prototype santa cruz v10 29er downhill mountain bike with custom linkage

Different size linkages are used, and they’re continuing to test linkage and pivot placements, lengths and other kinematics before finalizing the design. While Santa Cruz Bicycles hints that more info will come after the Lourdes race on April 30, 2017, it’s clear that testing will continue throughout this season.

prototype santa cruz v10 29er downhill mountain bike for greg minaar at Lourdes UCI world cup race

prototype santa cruz v10 29er downhill mountain bike for greg minaar at Lourdes UCI world cup race

The Fox 40 29er brought its own set of challenges. It’s built with Boost axle spacing, with brake mounts set accordingly, but “Boost” 20mm thru axle hubs aren’t really a thing yet (just wait, they will be), so they turned to team sponsor Chris King for the fix:

prototype santa cruz v10 29er downhill mountain bike with custom Chris King Buzz Works 20mm Boost front hub

Through their Buzz Works program, they created a special 20mm thru axle front hub with brake mounts and flange spacing to center the wheel and ensure the rotor was in the right place. They also created special angle adjustable headsets for the bikes so the riders could dial in the head angle during testing.

Check out their story with rider comments on SCB’s new page here.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

4 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Mac
Mac
7 years ago

The bikes were supposed to debut for the 2018 season but King finished the hub a year early. They cut their normal prototyping timeline down from 4 years to 2. Now how bout some centerlock mountain hubs guys? ;o)

Rowan
Rowan
7 years ago

When you leave your Hightower and V10 in the shed together

Magilla Gorilla
Magilla Gorilla
7 years ago

Not for nothin’ here guys, but could you clarify how a 20 mm front hub…which is already spaced at 110 mm…Is changed to have an axle spacing of 110 mm? I’m assuming the flanges may be further apart than a normal 20 mm t-a hubs flanges might be?

Brendan
Brendan
7 years ago

Old 20×110 hubs had the brake rotor the same distance from center plane as 100mm hubs. Boost 15×110 pushed out the brake rotor 5mm. Boost 20×110 will have the rotor in the same place as Boost 15×110, 5mm farther than old 20×110. Confusing, I know. The plus side is it’s backwards compatible in a couple ways: you can use an old 20×110 hub with a 5mm rotor spacer, or or many Boost 15×110 hubs will be adaptable with new 20mm end caps.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.