Home > Reviews > Component Reviews

Review: CarbonCycles eXotic rigid carbon fork breathes new life into a classic lightweight mountain bike

CarbonCycles eXotic carbon fork, aftermarket affordable lightweight rigid 29er mountain bike fork
18 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Chalk this one up, not to new tech, but rather to the almost limitless options available on the internet in a mature cycling industry that’s been cranking out carbon forks for decades. Earlier this spring I gave new life to a bike I’ve ridden and loved for a long time – ditching a 100mm fork, for this CarbonCycles eXotic rigid carbon fork – shedding almost two pounds in the process and opening up new monstercross, insanely wide dropbar off-road adventures…

CarbonCycles eXotic carbon rigid 29er fork

CarbonCycles eXotic carbon fork, aftermarket affordable lightweight rigid 29er mountain bike fork

So what’s so special about this eXotic carbon rigid fork? Probably not a huge amount at first glance. But it is worth a closer look. The design & construction is pretty much standard catalog fare that you could find in the mountain bike industry for several years now: forged 6061 alloy dropouts and one-piece crown are connected by a couple of bonded-in 34mm diameter 3K-weave round carbon tubes, and finished off with a 7075 alloy steerer tube. None of that is revolutionary, nothing high tech, and there are surely lighter & stiffer methods of construction if that’s what you are going for. But its a EN/DIN tested fork that’s easy to get ahold of in either Europe or North America. And it is exactly what I was looking for.

Fitting a rigid fork to a classic mountain bike – Selection & Tech details

CarbonCycles eXotic carbon fork, aftermarket affordable lightweight rigid 29er mountain bike fork

What I was actually looking for were the specs. Lets’s start with the Moots Mooto-X YBB cross-country mountain bike that I built up in 2006. From its origins, this was a bike to run either with a Rohloff or singles speed hub in the back, depending on my trail riding mood. With the undeniable ride of American titanium, this has always been a bike that I imagined would outlast any components I put on it. And it was time to ditch the 100mm XC fork that had been on it since day one, and shed some weight for a new outlook on life.

So, I needed a 485-490mm axle-to-crown length so I could drop it in without altering my geometry – replacing the 100mm fork that sat at 486mm with sag. I needed a straight 1 1/8″ steerer & disc brake tab to fit my 14-year-old Moots. I wanted 100mm QR dropouts so I could use existing wheels. And even though I was looking to save weight & complexity over the old RockShox Reba SL fork, I wasn’t looking to spend many hundreds of dollars/euros in the process.

CarbonCycles eXotic carbon fork, aftermarket affordable lightweight rigid 29er mountain bike fork

Surprisingly, there aren’t a lot of options that really fit what I was looking for. For some time I picked over the internet, but wasn’t even super happy with what I found. But then comes CarbonCycles that has 75 forks on offer (55 in carbon) in tons of different, mostly off-road configurations. Their basic online Fork Selector tool let me pick the key attributes I was looking for (I started with length, then steerer size). And it spit out this affordable option…

CarbonCycles eXotic carbon fork, aftermarket affordable lightweight rigid 29er mountain bike fork

The selector picked the very romantically named F0E90 fork with a 490mm a-c length & 42mm offset. (There’s also an alloy-legged version with the same crown & dropouts, and a carbon one with a 15mm thru-axle.) Plus, without a fork brace, tire clearance became huge. There’s plenty of extra space beyond the biggest 29 x 2.4″ tire I’m ever likely to put on this bike (that 2.4″ was essentially the max for the old Reba, but now I get more more room.)

CarbonCycles eXotic carbon fork, aftermarket affordable lightweight rigid 29er mountain bike fork

Beyond the fork itself, UK-based online retailer CarbonCycles & their sister brand DiscoBrakes (who also have US warehousing & delivery) sell a number of other accessories – like these eXotic 4D carbon bottle cages (which held bottles surprisingly well on the trail, so far), carbon top cap & spacers, plus new mechanical brake cables & Avid mechanical replacement pads that all got replaced when I decided to install this new rigid fork.

eXotic carbon fork – Actual weight & weight savings

CarbonCycles eXotic carbon fork, aftermarket affordable lightweight rigid 29er mountain bike fork

The result is this glossy $195 / 170€ eXotic Carbon Rigid MTB fork that weighs 854g (just 4g over claimed weight). That’s almost half the weight of the 1697g Reba SL fork that had been on the bike since 2006. Matching specs with what I was looking for, it was a trouble free swap. The only spec I wasn’t 100% sure of was how the 42mm offset would compare to the Reba’s 46mm. But I deemed it close enough to try (it lengthened my trail by 4mm in the end.)

So, how does it actually ride?

Review: Riding impressions on the eXotic carbon fork

Well, you could have already spotted the CarbonCycles fork & bike a month back as it has been the platform I’ve been riding to test out the monstrously 75cm wide Curve Walmer flared dropbar. For the past few pandemic months, I have been riding the now more rigid Moots (it’s a YBB so there’s 30mm or travel in the back) in three modes: monster gravel bike, XC singletrack bike, and slow-speed trail riding with my small kids. In every mode it has felt like a real upgrade over the suspension fork which never felt super necessary for these types of riding.

The titanium bike is a singlespeed, so it was already decently lightweight. But dropping 840g off the front end with the swap to new rigid fork made the ride feel especially lively. With the relatively large volume (for cross-country) of the recent 2.3″ Hutchinson Kraken tires, I still have plenty of room to work with lower tire pressure to take a bit of the edge off of most trails. So, I’ve never really missed the suspension fork since its been gone.

I have piloted the new fork through a few rock gardens and into some rooty sections of trails, and it seems to handle at least as precisely as the Reba before it. Watching carefully through washboards or stutter bumps, I can see a bit of the fore-aft flex of the fork. But never have I had the sense of any compromising flex by the time it makes it to the handlebar, suggesting that the carbon legs are likely doing a bit of damping.

CarbonCycles eXotic carbon fork, aftermarket affordable lightweight rigid 29er mountain bike fork

All that said, this is a budget rigid carbon fork, and I’m unlikely to ever put it through any high-speed technical enduro paces. There are plenty of more appropriate full-suspension mountain bikes for that.

What this fork has done, is breathe some welcome fresh new life into a classic mountain bike that I’ve ridden for 15 years, and that I feel re-energized to ride for a long time to come. At a time when it’s become increasingly difficult to even try to replace an old high-end suspension fork with something on par with its original performance, the rigid eXotic carbon fork makes the Moots feel fast & sprightly once again. And it helps remind me how fun this bike is to ride.

CarbonCycles.cc

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

18 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
David
David
3 years ago

Nice to see Carbon Cycles is still around. I bought 2 of their forks about 10 years ago, and they were still in active circulation until a couple years ago. Great value!

Kevin Collings
Kevin Collings
3 years ago

Took a chance on a fork from them on my daughter’s bike this year. I had some oddball requirements too, 26″, QR, & straight steerer. Couldn’t be happier with it! Took a solid 3.5 lbs. off the bike over the POS suspension fork it came with, and I doubt she’ll ever get rowdy enough to kill it. Bike is MUCH easier for her to handle too.

Ric
Ric
3 years ago

Why..?
Frames, handlebars, crankshafts…
And Forks again..?
Something is bound to give…
That Moots has been around for years!

!romurekib
!romurekib
3 years ago

Is that a face mask being worn on a few of the photos? Coronas favorite place to strike is on a solitary ride in the middle of the forest.

stevie962870553
3 years ago
Reply to  !romurekib

it’s hard to imagine ANY reason to question mask usage. there’s absolutely zero negative consequence to your life by seeing him wear a mask, and it shows there’s at least some empathy and social contract adherence in the ranks of cycling.

King County
King County
3 years ago

Nice photos.. over the water, ..in the cave thing, ..logs. The fork looks good, too.

MGK
MGK
3 years ago

We can ALL question mask usage Steve-o. The media has shoved paranoia down your throat and deep into your head. Look at the numbers, get over it and move on.

stevie962870553
3 years ago
Reply to  MGK

there’s that self-centered cyclist we all know and loathe!

name one, singular, even marginally peripheral way in which you are negatively affected by someone else choosing to wear a mask in the name of personal and/or public health.

do we know how off the populated path the setting for these photos really is? no. do we know the minutiae of the rider’s personal immune system? or the health of people in the rider’s circle of contact? do we know if the rider was at a BLM march, and have they received a negative test result since? no, we don’t know any of that, just as he doesn’t know any of that about our lives.

what we do know is there’s half a million extra death certificates filed worldwide in the past 5 months, and using a fork review to show there’s a way to keep having fun while doing the absolute bare minimum to maintain his health AND OURS is an action that is truly impossible to imagine objecting to.

Will
Will
3 years ago

As a doctor, I’ll just point out that Steve is 100% correct. I also don’t expect MGK to change his opinion.

whatever
whatever
3 years ago

EXCELLENT response stevie! Thank you.

Dylan
Dylan
3 years ago
Reply to  MGK

@MGK I’m sitting in Tasmania, Australia where we looked at the numbers back in March and ACTED ON THEM appropriately. We haven’t had a single case of community transmission since April, and our last imported case identified in quarantine was about a month ago. We have had 226 total cases and 13 deaths so far.

I’m guessing numbers where you live aren’t looking so hot right now?

If you would rather be paranoid about the big bad media controlling your thoughts at the direction of a conspiracy of the world’s scientists than about an actual pandemic, I hope that works out well for you. I wonder if you can tell us whether riding wearing your tinfoil hat is more or less uncomfortable than wearing a mask?

jazzguitarvt
3 years ago

My 1992 Ti Fat Chance has a lighter steel fork, with total bike weight of just under 20 pounds, or 9kg. Back to the future.

Guy Cheney
Guy Cheney
3 years ago

Hey Cory, I’ve had that fork for a while on a Frankenbike 29er steelie. I love that bike as much as I loved the Schwinn Typhoon I got for Christmas in ’63. I recently “electrified” it with a TSDZ2. And the affair continues…

Please let me know what size front brake rotor you are running. I have been trying to find the “official” maximum rotor diameter rated for this fork but no luck. Running 160’s front and rear now but trying to decide between 180mm and 203mm up front for a little extra whoa! Any feedback appreciated.

Gee Bee
Gee Bee
3 years ago

Thanks for your review of this fork. I’m doing a similar type of project just now and will be ordering one.
Any thoughts on it a few month down the line?

Mark
Mark
1 year ago

Is that a 69er??

Larry Crichton
Larry Crichton
7 months ago

On an older, steel frame, is there an issue with the top of the fork crown hitting the underside of the downtube?
A Fox 32 suspension fork did this to my steel Dekerf.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.