Home > Other Fun Stuff > Advocacy & Industry News

We’re finally getting a Shimano Quick-Link chain connector… again.

35
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Shimano Quick-Link SM-CN09 quick connect chain link for 11-speed bicycles

Remember that Shimano quick connect chain link they offered? Probably not, either because you’ve banished it from your mind or because it never really gained popularity thanks to a severe lack of user friendliness.

Word on the street is we’ll see a new version this June that looks just like every other quick link option. Because, you know, it works…

Shimano Quick-Link SM-CN09 quick connect chain link for 11-speed bicycles

Thanks to an anonymous tipster, we have these photos of both the upcoming SM-CN09 Quick-Link part (top and bottom pics), and this image of one of several old designs (directly above). The early versions required a cumbersome contortion of the chain and pin, or bending the outer plate and snapping it on, to install. It ended up being much easier to simply press in a replacement pin like what comes with their chains.

Shimano Quick-Link SM-CN09 quick connect chain link for 11-speed bicycles

The new version is only for 11-soeed chains and has offset openings like links from SRAM and KMC, letting you simply slot them together and tension the chain to snap it closed. Like everyone elses’, they’re not intended for re-use, but (and this isn’t advice, merely an observation upon which you can make your own decisions) we’ve reused the other brands’ links with no issue.

Look for the part to retail for under $10. Shimano will recommend using their TL-CN10 to install and remove, but we like the Clever Standard tool that doubles as a tire lever and is far more packable.

Bike.Shimano.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

35 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Tyler Durden
Tyler Durden
5 years ago

Yay Shimano!! I think the truth about Shimano is that if they played the ‘copycat’ game more often they could just blow the competition away every time. Seriously, who wouldn’t want an XTR/DA quality crank with a 30mm aluminum spindle and direct mount capability? Is it because it’s not manufacturable, or are they just stodgy…? Methinks a lot of it is the latter….

Shafty
Shafty
5 years ago
Reply to  Tyler Durden

Shimano makes changes, or improvements, when they think they’re justified. They’ve said time and time again, that their spindles are plenty stiff, and that a move to 30mm aluminum spindles wouldn’t be worth it. They’ve made things like that as prototypes, so it’s not as though they’re blind to the idea.

The quick link, while convenient, is totally unnecessary, as you need a chain tool to size your chain anyways. Just push out a different pin(preferably 180 degrees opposed) next time you remove for it cleaning. Or, you know, clean it on the bike. Pins are cheaper!

If you can’t remove the quick link without tools, what’s the fuss pressing a pin? What if your chain breaks not at the quick link? How would you shorten it if you’ve stopped carrying a chain tool?

Bill
Bill
5 years ago
Reply to  Shafty

The problem here isn’t with the current cranks – they are still great cranks. Stiff as anything else, if not more. The problem is that more and more, we’re needing adapters to fit those little spindles in oversized press fit frames. The rest of the industry decided, and if they stick to what they like because they think it’s better for too long, they’ll start getting eye rolls like a certain italian manufacturer does.

Tom
Tom
5 years ago
Reply to  Bill

Smaller crank spindles = more room for bigger, stronger, longer lasting BB bearings!

Dinger
Dinger
5 years ago
Reply to  Shafty

Re: “Shimano makes changes, or improvements, when they think they’re justified. ”

Or every 3 years, whichever comes first. Ex. D/A 7900 & 9100.

the biz
the biz
5 years ago
Reply to  Shafty

reusing chain pins doesn’t work out as well as reusing quick links.

Kcr
Kcr
5 years ago
Reply to  Shafty

Quick links are a good idea becuause they keep people from reusing chain pins, which is the fast lane to a broken chain.

BACBikes
BACBikes
5 years ago
Reply to  Tyler Durden

The reason aluminium spindles have to be 30mm is because they’d flex if they were smaller. The reason steels spindles, with minimal weight penalty, can be 22/24mm, is because they don’t flex. I’d prefer more space between spindle and BB shell for bigger ball bearings, with less disposability, personally. You guys can keep dealing with creaky throwaway cartridge races, if you like.

mark
5 years ago

Can’t be all that surprised it looks identical to the Sram links.

Kcr
Kcr
5 years ago
Reply to  mark

Pretty sure KMC makes sram chains, and wouldn’t be surprised if they manufacture for shimano too.

gringo
gringo
5 years ago
Reply to  Kcr

Most shimano chains come out of the KMC factory. It’s no secret.

ChrisC
ChrisC
5 years ago
Reply to  gringo

Exactly… And this looks like Shimano just asked KMC to stamp the same old quick link with their part numbers.

Kyle
Kyle
5 years ago
Reply to  gringo

Don’t think that’s true. My understanding is that although KMC does in fact make Shimano’s cheapest single speed chain, every other chain is actually made by Shimano.

Jason Quade
Jason Quade
5 years ago

I’ll never understand the benefit of a one time use install link.

Pillbug
Pillbug
5 years ago
Reply to  Jason Quade

As Tyler said, with caveats, it isn’t really a one-time use piece. I have no idea why the companies say that. (The 9 speed and wider are reusable.) I reuse them all the time on my bikes and customers’, with zero ill effect.

JBikes
JBikes
5 years ago
Reply to  Pillbug

For KMC I don’t. They openly state their non 11 spd links are reuseable 2-3 times. If their statement on 11 spd links was an effort just to sell more links, you’d think they would apply that philosophy across the board.
I’ve snapped a chain under power. Avoiding that alone is worth the $8 piece even if its just for piece of mind.

JBikes
JBikes
5 years ago
Reply to  Jason Quade

User friendly.
See Campag 11 spd chains, and really all 11 spd chains that require greater and greater tolerance of the connecting pin assembly. A quick link removes a lot of potential for user error.
I’ll pay for the convenience, not to mention it allows easier off the bike chain cleaning and waxing for the cost of a link should one not want to reuse (i don’t)

Thor29
Thor29
5 years ago

It’s my understanding that 8 and 9 speed SRAM power links were reusable but that 10 and 11 speed weren’t. At least according to SRAM. Am I wrong? I have noticed that the 8 speed SRAM chains I use on my single speed are easy to disconnect and reuse. The 9 speed SRAM chains on my commuter bike are almost as easy to reuse. The 10 speed chains were another story altogether and so I have recently been trying Wipperman and KMC chains which seem much better in that category whether or not they recommend reuse.

neologisticzand
neologisticzand
5 years ago

I feel like a lot of people already go the route that I do and install SRAM or KMC quicklinks onto shimano chains. But hey, if they start including them with their chains than that just saves me a little bit of money and an extra step.

Greg
Greg
5 years ago

Shimano has been fighting against quick links because they wear quicker than the rest of the chain and they tend to flex differently than standard links. Their first gen quick link solved the flex consistency, but wore really fast. Supposedly this new one is solid in the wear department.
I, for one, think the flex difference thing is overstated.

Limonipizza
Limonipizza
5 years ago
Reply to  Greg

Shimano, like campagnolo, they only produce things that make sense. “Other” companies, continuously squak about “innovations” just to exploit the consumer. They are very good at coming out with catchy products and take over the pres$… product itself are way overblown.

Pinko
Pinko
5 years ago

Such a big deal for quick links, when you still need to carry a chain braking tool. Compare to the pins, does it even save a minute? Pins are lighter, cheaper, and do not snap. Plus you need to buy the plyers to remove the “quick” link.
Pretty useless except if you are getting paid for racing. It is just a catchy gimmic to add $5, $10 dollars to the cost of you chain.

Runwhatyabrung
Runwhatyabrung
5 years ago
Reply to  Pinko

A chain repaired with a quicklink will be the same length, a pin repair will be a link shorter. Plus, just running the chain thru the derailleurs or, extracting a jammed chain can be facilitated(like that word) by a quicklink. FWIW the more you reuse- the looser the quicklink snaps back together.

Champs
Champs
5 years ago

Try to imagine all life as you know it stopping instantaneously and every molecule in your body exploding at the speed of light.

Then think again about reusing quick links.

steve
steve
5 years ago
Reply to  Champs

Total Protonic Reversal!

namdaphamirror
5 years ago
Reply to  Champs

: D Great comparison

Bill
Bill
5 years ago

How many people actually reuse quick links? I clean my chains regularly – usually monthly or so in a batch so I don’t waste degreaser and make more than one mess of it, and the only time I need to remove a chain is usually when it’s dead.

If you took your chain off to clean it, what do you do to it? Short of having some kind of ultrasonic cleaner, what’s really doing more than an average chain cleaner used in place?

Will
Will
5 years ago
Reply to  Bill

I shake it up in an old peanut butter jar filled with solvent.

JBikes
JBikes
5 years ago
Reply to  Bill

Although possible, its difficult to wax a chain properly while installed.

Matt
Matt
5 years ago

I reused my 11spd sram quick link on my trail bike at least 5 times last year with 0 issues. And of all the chain snaps I’ve had over the past few years, not 1 was at the quick link.

Will
Will
5 years ago

Cleaning your chain on the bike never gets all of the grit off and is messy, like wearing your jersey in the shower to wash it. I clean mine in a couple of solvent rinses (you could white glove it), dry it, then oil it.

doug
doug
5 years ago

If this is an early April Fools joke I’m going to be so bitter!!!

WannaBeSTi
WannaBeSTi
5 years ago

On my customers’ SRAM bikes, I use the Quick Link they recommend. On my customers’ Shimano bikes, I use the recommended pin. The reason I do this is simple. If the customer has a problem, I don’t want anything I’ve put on the bike to result in a denied warranty claim. I’ve been asked by a Shimano tech rep if there is a Quick Link on the chain. I also try to keep customers’ drivetrains in one family because they work better or the company dies trying to make it work better.

Ashok Captain
Ashok Captain
5 years ago

Sound, logical solution. Most sensible approach for customers. Chapeau!

PeterM
PeterM
5 years ago

My chain just broke on the quicklink and i could not find the other side piece to put it back in place. It was fun walk home from middle of nowhere.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.