Home > Clothing-Gear-Tools

Roundup: Quirky new goggles, rims, freehub bodies, pumps, trunk racks & more!

7 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

myles-pano-wraps-enduro-mountain-bike-goggles01

Miles Wide Industries started out with the humble Sticky Pod, a jersey-pocket sized soft case that keeps the essentials safe and secure while you ride. They also work great stuffed in a hydration pack to keep tools, pumps, etc., from bouncing around or small parts from getting lost.

Since then, founder and Asheville, NC, resident Miles Schwartz has been busy creating a few other storage and protective devices. Like the PanoWraps enduro goggles shown above. Offered in dark smoke, orange and clear lenses, they’re super lightweight wraps that protect your eyes from wind, water and dust. They also have a sweet retro aviator look, and they’re just $30.

Check out lots more from them and others, below…

myles-pano-wraps-enduro-mountain-bike-goggles02

They’re made to fit under full face helmets, but will work fine with standard lids, too. Despite the angular appearance at the corners, they don’t distort your vision once on.

myles-everclear-frame-protection-decals01

His Ever Clear laminate comes in a 9×12 sheet that lets you draw and cut whatever shapes you need for your particular frame. It’s a thick, durable material, but is perfectly clear. Use it to prevent cable and heel rub marks, or on the fork lowers and downtube to prevent rock strike damage. $17.99.

myles-duckflap-mud-fender-bottle-pod-tool-storage02

The Duck Flap is his take on the flexible fork-mounted mud flap. The key difference from competing items? It comes in colors! Choose from these or black, and mount them on your seat- or chainstays, too, to protect your shock or backside from mud splatter. Up front, the nose is left a little longer to give you better coverage, and the long tail sticks back far enough to catch the spray that’d otherwise hit your face.

Next to it is the Bottle Pod, a new iteration of the Sticky Pod that fits in a water bottle cage. It’s shown open on the top left and far bottom right (with the Clif Bar in it). Inside is a full length zipper mesh pocket on on side and a divider with elastic retention bands on the other. Load it, zip it shut and stick in your spare bottle cage to add a little more storage to your bike. Retail TBD.

rocky-mountain-holsters-bicycle-cup-holder01

Fellow entrepreneur Andy Houston makes Rocky Mountain Holsters, leather cup holders that attach to various points on your bike to make more casual hydration efforts possible.

rocky-mountain-holsters-bicycle-cup-holder02

They’re made from premium 100% vegetable dyed leather and can be customized if you want to gift someone special. He also makes belt-mounted drink holsters and other leather goods.

trunk-monkey-inflatable-trunk-mounted-bicycle-rack02

For holding the bike itself, Trunk Monkey has a very different take on the trunk or tailgate mounted strap-on bike rack. By putting a large inflatable cushion between your bike and the vehicle, everything’s protected from damage and your bike gets to ride on air.

trunk-monkey-inflatable-trunk-mounted-bicycle-rack01

The inflatable core is covered by a durable Cordura/Kevlar shell. It straps to the car like any other non-hitch mount rack, then the bike is strapped to it. It fits virtually any style and size frame and, when not in use, deflates and packs down to fit in a small stuff sack that can be strapped to your seatpost or in a backpack. Or just toss it in the trunk. That makes it easy to bring your own bike rack with you on travels where you rent a car or have friends picking you up. Or Uber.

Trunk Monkey launched this summer via Kickstarter and was successfully funded, but they’ve missed their September deliver date. We’ve reached out to see how things are going and will update if/when we hear back. UPDATE: Brad from Trunk Monkey replied to say they should be shipping in January and retail will be $159.

v-grip-bicycle-fenders-with-integrated-blinky-taillights01

V-Grip is an Asian bike parts manufacturer that had plenty of stuff on display to show their capabilities. These bolt-on and strap-on fenders with blinky lights seemed like a good combo for commuters,

zevlin-custom-handlebar-tape01

Zevlin has been offering custom handlebar tape for years alongside their chamois cream and shower-less body wash. Now, they’ve got a new stitched version of their extra wide 40mm (1.5″) bar tape.

zevlin-custom-handlebar-tape02

It’s a synthetic cushioned tape that comes in gray or black with your choice of blue, green or pink stitching. Retail is $18.95 per set and includes bar end plugs and finishing tape.

sapo-floor-pumps02

Sapo is an Italian bicycle pump manufacturer that uses premium steel for their high pressure floor pumps. The handles are beechwood, the hoses are extra long and use a multi piece head to fit all common valve types.

sapo-floor-pumps04

Depending on model, they’ll pump up to 180psi (12.4bar) to 217psi (15bar) and have a broad base so it stays stable underfoot.

sapo-floor-pumps01

What appeared to be a fancy metal inflator for CO2 cartridges is actually their Buro mini-pump. Measuring just 123mm or 133mm long (60g/66g) depending on model, they’ll inflate up to 100psi (7bar). Sapo’s available in the U.S. through Albabici.

ryde-trace-42-ultra-wide-mountain-bike-rims01

Ryde’s Trace rim lineup debuted at Eurobike 2014 with three widths, from an XC-ready single wall design that measured 21mm internally to the wide, reinforced 23mm and 29mm internal width models. Now, they’ve gone even bigger with the Trace 42. The name refers to the inside width, giving your tire a goooood stretch.

ryde-trace-42-ultra-wide-mountain-bike-rims03

ryde-trace-42-ultra-wide-mountain-bike-rims04

Symmetrical and asymmetrical spoke hole and extrusion designs let you build up the wheels just right regardless of the hub width of drivetrain standard you run (10/11 speed, DH 7-speed or singlespeed).

woodman-cutout-freehub-body02

We saw Woodman’s prototype steel-over-alloy threaded freehub body design at Eurobike (along with some other cool new stuff), and now it’s final. The design threads a hard steel external sleeve with the grooves for cassette placement over a lighter alloy inner section.

woodman-cutout-freehub-body03

The design saves weight over a full steel piece without risking the damage that’s typical when a cassette digs into an alloy freehub body and things get stuck.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

7 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
tedder
8 years ago

I think the BURO is actually the BJRO. And it’s a single-action; compare to the KCNC KOT07 which is a double-action and must be about the same size.

Val Driver
Val Driver
8 years ago

Sweet Eyewear! Have worn them for years at over 120mph with no issues!

http://kroops.com/

Henry
Henry
8 years ago

WOW! How original! ANOTHER knock off plastic fender…

Magnetic Wheel Co.
8 years ago

Woodman for the win! Those hubs are going to be hawt potatoes at my shop this year. Ryde’s rims look promising too. Especially the Pulse Comp Disc, sub 400g!

WV Cycling
WV Cycling
8 years ago

These frame films are funny because 3M sells rolls of tape running 15-22mil.

If I was a bike shop, I would offer to frame protect bikes for 1/2 – 2/3rds the cost of some of these kits when bought new from the shop.

Scott
Scott
8 years ago

HaHaHa! Those goggles have been used in skydiving for decades! Much cheaper if you buy them from a skydiving website.

Bernie
Bernie
8 years ago

The Panowraps are a knockoff of the Kroop’s Oregon Cycling Goggle. They’ve been around for 15 years. http://kroops.com/collections/oregon-cycling

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.