Home > Feature Stories

Review: LOOK Trail ROC Flat Pedals for Mountain Biking tested over a Scottish Winter

look trail roc flat pedal review mtb
10 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

At the back end of last year, LOOK launched a series of flat pedals for the first time in their 70 year history. Released alongside some flashy Vibram rubber-topped flat pedals for light off-roading were the LOOK Trail ROC pedals aimed specifically at full on mountain biking. Excited to see what LOOK have to offer to singletrack enthusiasts, we got a set in for testing on our local trails in the Tweed Valley, Scotland.

Feature Image by David Cheskin

Review: LOOK Trail ROC Flat Pedals

LOOK TRAIL ROC MTB PEDALS FLAT 110MM X 100MM PLATFORM LARGE ALUMINIUM BODY

The Trail ROC flat pedals retail at $80. That’s a very reasonable price for an alloy pedal when you compare it to the likes of the popular Nukeproof Horizon v2 Sam Hill pedal, the DMR Vault or the Burgtec Penthouse MK5 flats, all of which are priced well over $100. And they’re from LOOK, a brand well-respected for their quality road pedals.

look trail roc flat pedal actual weight 221g

The LOOK Trail ROC pedal gets a 110mm x 110mm platform, a fair bit larger, and heavier, than the abovementioned competitors. One pedal weighed 221g on our Park Tool digital scale.

LOOK TRAIL ROC MTB FLAT PEDAL REVIEW PIN PROFILE

That big platform is home to 12 pins on each side. In their original press release, LOOK stated that six of those pins (the ones at the front and rear edges) stand at 10mm tall while the other six that track along the middle area of the pedal body are just 8mm tall. On our pair, there were definitely three different pin heights…

look trail roc pedal pin height arrangement

The front and rear pins are the tallest, while the center-left and center-right pins stand at under half their height. The remaining two pins located in the middle region stand at a height somewhere in between the other sets. 

look trail roc flat pedal platform lacks concavity

As the LOOK Trail ROC pedal body itself lacks a concavity for your foot to sink into, having taller pins at the edges and lower profile ones centrally (as per LOOK’s press release) would make sense to help create a pseudo-concavity through the height of the pins alone. Thus, we were surprised to see medium-height ones placed in the center region. 

look trail roc pedal pins

Perhaps i’m laboring the point a little too much, especially when you consider that each pin has a Allen head in the top so you can rearrange their positioning to your liking. I ran the pins in the stock layout.

With a fairly flexible-soled shoe like the original Specialized 2FO, placing all weight onto one pedal, I was able to feel the pedal’s axle region through the shoe. This was considerably less noticeable on the somewhat stiffer Crankbrothers Stamp flat shoe.

crankbrothers stamp shoe review
Credit: David Cheskin

From the get go, it was fairly clear this platform was going to be a little on the large side for my UK 5 shoe size. As you can see in the above image, my shoe was never quite able to connect with all 12 pins simultaneously. This was evident when riding rough trails. While the grip was plentiful on smoother terrain, and predictable trail centre tracks, the more chunder-like terrain revealed the less-than-optimal connection, with my back foot in particular inching backwards off the platform as I rode.

look trail roc mtb flat pedal review
Credit: David Cheskin

This is likely because my shoe would have rarely contacted the outermost low profile pins. For that reason, I will steer clear of recommending the LOOK Trail ROC to those with small feet.

look trail roc crankbrothers stamp
Credit: David Cheskin

BUT, by the same token, this could well be a great pedal for riders with larger feet. LOOK chose to angulate the outer arms in an attempt to maximize the platform size without causing too much in the way of pedal strikes. This being a wider pedal than what i’m accustomed to, it took something of a beating on to its outer edge. I’m pleased to say it held up really well, with the axle end cap still 100% in tact.

The LOOK Trail ROC pedal spins about a 17mm chromoly spindle with two sets of bearings and a DU bushing. After around a month of riding these pedals 3-4 days per week, we were surprised to hear the dreaded squeaking coming from the axle. The noise led us to check the axle and, sure enough, a small amount of side-to-side play had developed.

look trail roc flat pedal mtb 17mm thick

By most standards, that would be considered fairly rapid wear. But, when you consider that I was riding mid-winter in wet, sloppy, gritty conditions, there’s no wonder the bearings became compromised so quickly. For reference, this level of wear is on par with what I’ve experienced with two sets of Crankbrothers Stamp 3 pedals over the last year.

Pricing & Availability

The LOOK Trail ROC pedals retail at $80. Get them in any color so long as it’s black from authorized LOOK dealers and online retailers.

LookCycle.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

10 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Alan Lang
Alan Lang
2 years ago

These would be great if they could accommodate toeclips and straps – are there any decent flat pedals out there that could do so?

Dockboy
Dockboy
2 years ago
Reply to  Alan Lang

MKS.

Ray
Ray
1 year ago
Reply to  Alan Lang

Wellgo only pinned flat pedal makers that have holes for toe clip mounting, but at least these have a flat surface in the front for a DIY job

B Barber
B Barber
2 years ago

LOOK Alan, I’ll hook you up. I’ll put a clip on this pedal so you can clip in them. I’ll call it a clip in pedal. Make sense? Hahahaha, help, I need more coffee

Jason D West
Jason D West
2 years ago

Those look like shimano xt flats

DavidT
DavidT
2 years ago

another expensive set of pedals that do not last. at most 20 rides by the article and making noise and got play. Can any manufacturer make a pedal that lasts? i think not.

Rno
Rno
2 years ago
Reply to  DavidT

@DavidT: Shimano is often renowned for the durability of their pedals. OneUp sell reliable flat pedals and have the service parts to rebuild them (which is quite easy).

Matthias
Matthias
2 years ago
Reply to  DavidT

I’ve been using my Shimano PD-GR500s for at least 3 years now w/o any issues. Not quite as low-friction as the T8000 but as I don’t ride clipless any more I was tired of always having to find the flat side.

Freddy Krueger
Freddy Krueger
2 years ago
Reply to  DavidT

Saint PD-M828? They are heavy sure, but they developed no play as long as I had them. Now I’m trying out Stamp 7 and maybe 11 if the internetgods are present..

Ant'ney
Ant'ney
2 years ago

I’ll second the OneUp comment. I have a pair of the metal ones and a pair of the plastic. Both have held up to NE winters and many rock strikes. They look banged up, but still work fine (maybe a bent pin or 3).

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.