Home > Reviews > Component Reviews

First Rides: A Stiffer FOX 32 Step Cast XC Fork Feels Light, Fast & Capable for just 100mm

First Rides on 2025 Fox 32 Step Cast ultralight 100mm XC fork with all-new reverse-arch, dropping in rock garden
11 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

I’ll try to keep this one short and sweet heading into the weekend, but we had the exclusive opportunity for a first test of the wild new reverse arch FOX 32 Step Cast XC fork. Although it almost looks smaller than ever without seeing a conventional fork arch up front, this is undeniably a highly capable cross-country fork. Combining a new level of stiffness with an almost silly amount of apparent weight loss vs. the already light original 32 SC, this new fork will be a killer option for ultralight hardtail or short-travel full-suspension XC bikes!

MY 2025 Fox 32 Step Cast XC fork: First Rides Review

First Rides on 2025 Fox 32 Step Cast ultralight 100mm XC fork with all-new reverse-arch, dropping in rock garden
(Ride Photos/Pinarello)

I said I’ll try to be brief.*

Since I really only managed to squeeze in two solid rides on the new Fox 32 Step Cast cross-country fork, mounted to the same all-new Pinarello Dogma XC full-suspension race bike that Tom Pidcock raced to a 2023 XCO World Championship win.

*But readers who recognize my byline might not be so easily convinced. Oops.

MY25 Fox 32 SC 100mm XC fork: Review, up close
(Detail Photos/Cory Benson)

Yet this fork was completely new to me. And new to the entire team at Pinarello. Their INEOS team race on SR Suntour suspension, and literally no one had even thrown a leg over this bike fitted with Fox’s wild new reverse arch XC fork.

So everyone had their fingers crossed. But no one 100% knew what to expect.

And the fork was really good. Essentially right out of the box, with minimal setup and fiddling required.

So, I rode it hard over a wide range of terrain, and have plenty of positive feedback to share.

A brief catch-up on new Fox 32 Step Cast tech

MY25 Fox 32 SC 100mm XC fork: Review, new look

The 2025 Fox 32 Step Cast XC fork just came out last week, unveiled by Fox on the 9th. I rode it on the 11th.

It’s mostly unique in that it replaces the conventional forward-facing fork brace with a reverse arch design. That reverse arch is also composed of an open web said to maximize stiffness with limited material.

The new Fox 32 SC fork is 29er only and limited to 100mm of travel – for XC, marathon, and ultra-distance racing. But it also happens to have shed more than one hundred grams over the previous generation, even when that weight was for the 27.5 version. And at a claimed 1287g now, it has reclaimed the title of lightest XC suspension fork back from the RockShox SID SL.

Into the weeds

MY25 Fox 32 SC 100mm XC fork: Review, open spider web reverse crown

That open reverse arch is all about increasing stiffness – lowering the arch and balancing the axle offset on the opposite side of the lowers. These new cast magnesium lowers are in fact a couple grams heavier, not in fact lighter than the old lowers. But Fox claims they are significantly stiffer compared to the old 32 Step Cast. The overall fork is said increase torsional stiffness by 40%, making it nearly as stiff as the 34 SC.

The fork’s weight savings are mostly hidden inside – the lighter damper, stanchion, steerer tube & Kabolt SL thru-axle are said to save 97g.

Plus, another 9g for the new zero offset crown that reduced cantilevered forces to become stiffer.

MY25 Fox 32 Step Cast 100mm XC fork: Review, zero offset crown

Instead of having the stanchions in line with the headtube angle, this new crown angles or can’t the telescoping elements of the fork more in line with the forces coming in from the axle. It looks a bit odd with no offset at the crown. But means improved stiffness with less weight.

Fox does say this solution is limited to shorter travel fork loads. So even though it seems logical, we don’t expect to see it on many more forks in the short term.

MY25 Fox 32 SC 100mm XC fork: Review, Step Cast lowers

It still uses a Step Cast design towards the axle to save weight. And inside the now double-butted right leg, there’s a new lighter Grip SL damper – with smoother and faster compression adjustment between open, pedal & locked modes. The air spring side sticks with straight internal walls in its stanchion.

Full details on the updated MY25 Fox dampers, here.

My XC Setup

First Rides on 2025 Fox 32 Step Cast ultralight 100mm XC fork with all-new reverse-arch, fully open sprint

Itching to get out of the trail early the next day, I set my air pressure the night before, pumped up to the low end of the recommended range for my 85kg riding weight (at 95psi). I tried to figure on almost 25% sag, knowing that I had a remote mechanical lockout if I felt the fork was too soft.

That’s quite a bit more sag than the stiff 15-20% that Fox recommends. But I wasn’t going to be racing, so I wanted to be sure to use the travel. And I got that sag while essentially using the pressure recommended on the side of the fork leg.

In fact, the fork felt sufficiently plush for the short 100mm travel. But ramped up to offer plenty of support. Out of the saddle sprinting (like above) didn’t even require locking the fork out.

Climbing – Open, Medium, or Firm lockout modes

First Rides on 2025 Fox 32 Step Cast ultralight 100mm XC fork with all-new reverse-arch, asphalt climbing

And for the most part, I only went full lock on asphalt climbs. On really steep off-road climbs I did pop it into the middle half-locked Medium mode, which did a good job resisting bobbing as I stair-stepped up some nasty ramps in probably too hard a gear.

First Rides on 2025 Fox 32 Step Cast ultralight 100mm XC fork with all-new reverse-arch, attach the climbs

But the top-spec Pinarello Dogma XC felt so light, it wanted to fly up steep climbs. So often I would just stand up and stomp it out instead of downshifting. And the supportive fork in Medium semi-locked compression mode provided a perfect balance with ample stiffness, but still enough movement to keep the tire attached to the ground.

First Rides on 2025 Fox 32 Step Cast ultralight 100mm XC fork with all-new reverse-arch, loose gravel climb

Rebound I kept in the middle of the range, a happy medium of quick but not bouncy return. Enough to keep the front wheel attached to the ground over rough terrain, but not harsh on tougher descents.

And luckily didn’t need to change it, since it requires a fiddly little 2mm hex to adjust.

What does Fox mean that the 32 Step Cast is for Marathon, not World Cup XC?

First Rides on 2025 Fox 32 Step Cast ultralight 100mm XC fork with all-new reverse-arch, Riva del Gard rock slab descent

It’s a bit tricky where this new 32 SC gets pigeonholed. Fox describes the new ultralight fork as the “Absolute Lightest in XC. Made for Marathon.

Sure, a lot of XC racers have moved up to 120mm of travel to tackle the more technical tracks. So 100mm of lightweight travel is maybe not quite enough for the high race-pace speeds of the World Cup XCO circuit. But I’m pretty sure that I’m not attacking climbs and descents anywhere near the likes of Tom Pidcock on this bike.

So, while I love long-travel mountain bikes, 100mm on an XC bike is probably enough for most of us.

First Rides on 2025 Fox 32 Step Cast ultralight 100mm XC fork with all-new reverse-arch, loose gravel downhill

Even blasting down slabs of rock, drifting through gravel-strewn forest roads at probably too high speed, and smashing though rock gardens as fast as I felt comfortable, it was probably lightweight 2.4″ XC tires with tiny tread knobs that felt like my limiting factor.

I never felt lacking of travel or stiffness on my two fast rides. Smashing around technical trails and an XC race training loop just outside of Riva del Garda last week, the new 100mm Fox 32 SC

The 100mm travel Fox 32 SC managed to feel like it was really soaking up the bumps. Without quite edging into a zone I would call plush. It was active, supportive, and shock-absorbing in the best sense.

Plenty capable enough on the downhills for most of us

First Rides on 2025 Fox 32 Step Cast ultralight 100mm XC fork with all-new reverse-arch, ride it like a rental

I also didn’t manage to bottom it out, even though I tried pretty hard. Sending the short travel XC bike into rock gardens and off drops wherever I could see a clear-enough landing to be sure that the Recon Race tires would hook up enough for me to keep the rubber side down.

I set the fork up on the soft side. It supported my weight in and out of the saddle over steep terrain up and down. And it was plenty stiff to track wherever I pointed it whether through choppy turns or into rocks and roots.

It really did everything I could ask of a 100mm fork. The fact that it is probably the lightest 100mm for that I’ve ever ridden is just a huge bonus.

So, who is the new Fox 32 SC actually for, after all?

MY25 Fox 32 Step Cast 100mm XC fork: Review, no arch to be seen

This is a top-tier cross-country race fork, with a long-distance marathon leaning. And it comes with a suitably high cost. So, it’s clearly not fork everyone.

But as the lightest mountain bike fork on the market, the $970 price tag for the new Fox 32 SC Factory seems a lot more reasonable than I would have expected. A SID SL Ultimate with Flight Attendant sells for $1350. More my style of riding at home, a top-tier 36 Factory or Lyrik Ultimate, both sell for $1100. (Not considering Flight Attendant).

Now what bike would I want this new Fox 32 Step Cast on?

2024 Pinarello Dogma XC Hard Tail cross-country hardtail mountain bike, Ferrand-Prevot replica

The full-suspension Pinarello Dogma XC that I tested this new fork on was great. It is a UCI XC World Cup and World Championship-winning bike with this amount of travel. So that makes the 120mm travel argument a bit dependent on the rider. I would love that setup if I raced marathon distance XC.

But for how I like to ride, I would love to stick this on an ultralight carbon hardtail. Just like 12x World Champ Pauline Ferrand-Prévot. Try to build up a 9kg race rocket and see how fast I could push it on my local singletrack, forest roads, and maybe some local XCO & XCM racing. Or maybe inch up closer to 10kg with a light hardtail build suitable for off-road adventure racing.

This is a fork that wants to go fast. It’s just up to the rider to put the power into the pedals.

RideFox.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

11 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Nigel Morris
Nigel Morris
5 months ago

How would this compare to the Sid sL with flight attendant? Ie how much do you “need” the attendant over just leaving it “alone” as you did ?

Exodux
Exodux
5 months ago

I thought 120mm was the new suspension travel for XC? I wonder why Fox is only making this in 100mm.

Doug
Doug
5 months ago
Reply to  Exodux

34SC for 120mm, also very light, but a little more capable. The 32 is for Marathon, a lot of XCO athletes are using the 34SC.

C Malt
C Malt
5 months ago
Reply to  Doug

And Marathon is what XC used to be.

E B
E B
5 months ago

I’m mystified to see wisps of leg hairs in an article talking about XC and 32mm stanchion 100mm travel forks.

Joe
Joe
5 months ago

a 9kg race rocket haha
9kg is heavy for a HT. My large fully with 120mm DT Swiss, SRAM Transmission and dropper is 8.5kg. with the new 32 SC, you could easily build a 100mm fully below 9kg. but not with this super ugly pinarellos, too heavy.

Nick
Nick
5 months ago

I’ll have the original reverse-arch XC weapon, R7, please

Joe
Joe
5 months ago
Reply to  Nick

And the new damper is basically the same thing as Manitou’s intrinsic TPC damper. Fox is a marketing company.

R R
R R
5 months ago

What is the A2C?

Eggs Benedict
Eggs Benedict
5 months ago
Reply to  R R

Axle to Crown.

HotRods
HotRods
5 months ago

I would own this if it was affordable. Too bad the bike industry is pricing itself out of business. Seems like the parts on aliexpress are getting more attractive with every new bike/part post on BR. 🙁

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.