Home > Bike Types > Mountain Bike

Suspension Tech: How to measure actual rear wheel travel

how to measure rear wheel travel on a mountain bike at home
9 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Let’s say you want to verify those manufacturer claims and see what your mountain bike’s rear wheel travel really is. That was a question from Bikerumor reader Dan, so we reached out to Niner Bikes to see how they’d recommend doing it. Here’s their response along with pics from their lab…

“Frame travel is designed around the shock manufacturer’s specification,” says Niner’s Engineering and Production Manager George Parry. “So, if the shock manufacturer specifies 50mm of shock stroke. The frame travel will be designed based on the full 50mm of shock stroke. However, the shock specification includes a bottom-out bumper. This makes it difficult to measure the actual shock stroke and/or bicycle frame travel without applying some very high loads.”

how to measure rear wheel travel on a mountain bike at home

“The best method for measuring frame travel may be to remove the shock and measure the vertical travel at the rear axle, with the suspension linkage at the full shock length, and at the shock bottom-out length (original eye-to-eye minus manufacturers specified shock stroke). To do this, we typically use the mill and drill holes in an aluminum bar to insure the holes are the correct distance for full extension and full compression.”

Many mountain bike manufacturers list the rear shock’s stroke length and eye-to-eye on their websites, but you can always call them directly if not. Once you know those numbers, you can replicate Niner’s method at home with a piece of wood and a drill.  Fix a piece of cardboard or wood next to the axle and mark the axle’s location at each extreme, then measure the distance between the two marks.

how to measure rear wheel travel on a mountain bike at home
Niner’s measurement equipment is a little more sophisticated, but the principals are the same.

“I know you were looking for a ‘simple’ method for measuring travel,” laments Parry. “(But if) you want an accurate measurement, I’m afraid I just don’t have one for you.

“I think you’d come pretty close if you could constrain the frame similar to what we’ve done and take vertical travel measurements at the rear axle with the shock spring (or air) removed. Then estimate the additional travel that would result from full shock compression, with the bottom out bumper compressed.

how to measure rear wheel travel on a mountain bike at home

Our take: Unless you’re typically bottoming out and smashing that bumper on most rides, you can easily measure usable rear wheel travel by supporting the bottom bracket shell and measuring the starting position with rear shock pressurized enough to fully extend the system. Then deflate the shock and it’ll pull the system as far into compression as it can, minus what the bottom out bumper is limiting. For coil shocks, you’ll need to remove the coil and manually compress the system. You’ll also want to secure the fork to ensure the only thing moving is the rear axle. This is easily accomplished by putting your bike into a workstand like Park’s PRS-22 or Feedback Sports’ Sprint, or on a fork-mount roof rack tray.

Big thanks to Niner for the answers and photos!


The fun never ends. Stay tuned for a new post each week that explores one small suspension tech, tuning or product topic. Check out past posts here. Got a question you want answered? Email us. Want your brand or product featured? We can do that, too.

SaveSave

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

9 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
jasonmiles31
6 years ago

In an alternate universe I think it would be interesting if suspension travel was measured in effective BB drop. Measure BB height with shock and fork fully extended then again when fully compressed.

d
d
6 years ago
Reply to  jasonmiles31

you can do that now if you know what maths to use.

JNH
JNH
6 years ago

Many moons ago I used to measure ‘actual’ travel with the aid of a set of dummy shocks. They were just steel bars with a half inch eyelet at each end and a third one where full compression would be. I also remember a sales rep from a Californian bike company trying to sell me a BS line about how their 160mm bike’s travel was ‘140mm vertical plus 20mm rearward axle path,’ around 2007. I gave their customer service rating a 6.6.
.
It was an easy way to measure travel without worrying about bottom out bumpers. It also educated me to how some bikes (like Nicolais) delivered the exact travel they said on the spec sheet, to the millimietre, whilst for others the number seemed ot have been plucked from the air.

the biz
the biz
6 years ago
Reply to  JNH

wow a 6.6, this guy means business

Ryan Cook
Ryan Cook
6 years ago

Flip the bike over and adjust the seat height so the axles are the same distance from the ground. Measure the rear axle height then deflate shock and measure it fully compressed. Axle paths are negligible.

140 vertical and 20 rearward is 141mm of travel.

Old fut
Old fut
6 years ago

Friend of mine bought the interbike turner five spot. He took it apart and measured the travel and found it didn’t quite have inches in the rear. Evidently he posted about it somewhere and someone from Turner called and it was a very heated discussion (I was sitting in his truck hearing his side of the conversation). Still gets brought up in the group 15 years later???

Tim
Tim
6 years ago

very few bikes deliver the advertised suspension travel a the rear. generally the number is rounded up to the next 10mm increment

Other Aaron
Other Aaron
6 years ago

For a Hardtail, measure the depth of your tire.

sambrownshaklee
6 years ago
Reply to  Other Aaron

THIS!

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.