Home > Bike Types > Road Bike

Closeup Look at Shimano Dura-Ace Di2 9070 SM-BTR-2 Internal Battery!

48
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2013 Shimano Dura-Ace Di2 9070 group on Trek Madone Project One road bike

The fine folks over at Race Pace Bicycles claim to have just put together one of the first bikes in the US with the new Shimano Dura-Ace Di2 9070 group, including the new internal battery. And they sent pics!

Thus far, we really haven’t put eyes on the new internal SM-BTR-2 battery. It was subtly announced alongside the Alfine Di2 and mentioned again when 9070 was introduced, but neither time did Shimano include photos. And when we saw a bike with it at NAHBS last year, they wouldn’t let us pull the post for examination.

Nick at Race Pace’s Ellicott City, MD, location said when they ordered the bike from Trek they were told the internal batteries weren’t shipping yet, but then it showed up in the box! Pics and details below…

The battery comes with several “slotted leaf spring” adapters and shims to fit different size seat posts. Once the right size parts are installed, an O-ring slides on them to lock everything in place.

2013 Shimano Dura-Ace Di2 SM-BTR-2 internal battery

Normally, the battery mounts inside the seatpost and enough slack is left in the wire to allow the post to be removed without yanking it loose…which would mean plenty of finagling to get the wire back out of the frame.

In this case, the battery placed in the seat tube rather than the post because Trek Madones use an inverted system where the post topper slides over the seatmast.

2013 Shimano Dura-Ace Di2 SM-BTR-2 internal battery on a Trek Madone Project One Road Bike

Fortunately, Shimano had the foresight to add an external remote charging port on the control box.

2013 Shimano Dura-Ace Di2 SM-BTR-2 internal battery

A couple more closeups.

2013 Shimano Dura-Ace Di2 SM-BTR-2 internal battery

2013 Shimano Dura-Ace Di2 SM-BTR-2 internal battery actual weight

Actual weight is 56g, roughly 15g lighter than the standard battery! Nick says Shimano told him charging time is about 90 minutes and has the same battery life as the standard battery. Win-win-win.

…and some general group shots:

2013 Shimano Dura-Ace Di2 SM-BTR-2 internal battery on a Trek Madone Project One Road Bike

Note how much smaller the 9070 Di2 is than previous generations – all thanks to smaller motors.

A carbon fiber cassette “spider” is a first for Shimano. We showed you its backside in our “Unboxed & Weighed” post, and here’s the inside.

HUGE thanks to Nick for sending this over!

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

48 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Gordo
Gordo
10 years ago

Totally sick!!!! Looking good!! That is a sweet bike!!

Quickie
Quickie
10 years ago

The stem angle and spacers look spot on.

Joshua Murdock
10 years ago

They’re spot on for somebody.

s
s
10 years ago

is it comparable with ultegra?

s
s
10 years ago

sorry, compatible with ultra?

Robert Melzer
10 years ago

Should be compatible with Ultegra. Going forward all Shimano electronic drive-trains will use the E-Tube wiring.

NOOO
NOOO
10 years ago

get that chain into the big ring! Go pro or dont show it on the internet.

dale
dale
10 years ago

Go pro? Eww, why are there so many posers on here?

James
James
10 years ago

Concerning “going pro” this isn’t about pushing that gear, it is about aesthetics. If you are taking the time to photograph something and put it on the internet to be viewed by others you should take the time to put the chain in the big ring/small cog and have crank arms in line with the chain stays. Just because you work for a bike shop or amateur blog doesn’t mean you shouldn’t know how to take a proper photograph, because once it’s taken and posted people are going to look at it and you should be respectful and appreciative of that.

Throw up in the toilet, not on the sidewalk.

Morten
Morten
10 years ago

By the looks of it, I’d say it’s a Domane
rather than a Madone.

Roy
Roy
10 years ago

Check out the PRO seatpost with an internal adapter to house the battery

http://www.pro-bikegear.com/publish/content/pro_2010/nl/en/index/news/di2_seatposts_coming.html

Those should be availble soon for everyone who needs a regular seatpost instead of an integrated one

Psi Squared
Psi Squared
10 years ago

Wow. In a story about Shimano’s internal battery, what the peanut gallery latches onto is the chain on the small chainring. Wow. That doesn’t speak very highly of the audience.

Joey B
Joey B
10 years ago

@Psi Squared – AMEN!

Quickie
Quickie
10 years ago

What do you want guys want us to say?
I have a hard time getting hyped about a battery mounted in a seat tube or post. Maybe it’s just me, but there isn’t exactly anything groundbreaking or game changing to see here. As such, I will continue to post comments that the stem should be slammed and the crank should be setup properly to photograph. In its current setup I imagine the bike fitting a T-Rex quite well.

(deleted)

Joe
Joe
10 years ago

It’s probably being setup for a local doctor or lawyer type. If I could afford it, that’s how my bike would be setup for my riding style. Not everyone that rides a bike is a CAT whatever racer wantabe.

johndoe
johndoe
10 years ago

that’s definitely a Domane. and this makes no sense because previous generation Madones/Domanes had a molded cover on the seat tube stub. unless trek redesigned the integrated seat masts specifically for the internal batteries idk how they would get the batteries “inside”

lmwong
lmwong
10 years ago

curious how long that battery will take before it falls down the seat-tube on that bike. I don’t see how they could have inverted it and feel confident it wouldn’t come loose after riding. Probably not the best bike to implement an internal battery like this.

lmwong
lmwong
10 years ago

Oh now I see there are grooves for the O ring on both ends. My bad…

The Dude
The Dude
10 years ago

Just enjoy the fact someone took the time to make an article. No one cares if it is in the bike ring on not. Half you chooches run SRAM and the other chooches are too cheap to buy the new group anyway.

The Dude
The Dude
10 years ago

Big*

Greg
Greg
10 years ago

@Quickie – You’re right, battery powered groups “aren’t” game changers? I guess cool stuff like rim brakes and cork bar tape is, LOL…
@James – You’re a bag!
Bikerumor, keep up the good work and keep sending us updates of the new, stuff we want and are buying. Well most of us are…

Artificer
Artificer
10 years ago

So I am guessing that won’t work with the Venge seat post. I wonder if they will make on compatible.

SI
SI
10 years ago

Slam that Stem!!!!!
http://slamthatstem.com/

Bogwolf
Bogwolf
10 years ago

@johndoe

Domane 6 series in my shop has open tube for the seat mast so installing this would not be a problem.

@Quickie, you pedantic git, who cares which ring its in. Also stem stack is a valid set up adjustment to suit the rider, and when selling a bike its usual practice to leave as pictured, as moving the spacers over the stem looks really daft, and you don’t cut down a steerer unless the customer has asked for it.

NOOO
NOOO
10 years ago

@Bogwolf, This is a beautiful bike and it looks like (deleted). Time should be take to cross the T’s and dot the I’s so that the true beauty and engineering can be appreciated.

PS, Im not a trek fan boy but I do like nice bikes from all manufactures

dan_marino
dan_marino
10 years ago

dan marino says stop obsessing over internet bike photos and go ride your bike. go broncos.

Eric
Eric
10 years ago

weight of complete bike?

Joshua Murdock
10 years ago

Next we can all criticize the order and arraignment of the Gu packets on the shelf and mourn the fact that the left edge of the rug extends past the corner of the slot wall/counter. And the parts scale isn’t square within the picture; what will we do???

I usually pose bikes when I photograph them… but it really doesn’t bother me if other people don’t. Seriously, who cares. This isn’t in a catalogue or on a dealer website – it was taken quickly in a shop by an employee who has far better things to do than catch hell from a bunch of picky commenters online.

Be glad they took the time to send the info and pictures to BR so we can have the article.

Spencer
Spencer
10 years ago

Seriously, they don’t even have the presta valves next to the floor so the tire brand is parallel to the ground, what a bunch of amatuers.

DarrylStrawberry
DarrylStrawberry
10 years ago

Im with Marino and Murdock on this one. Some show love, some mean mug. Some choose to hate, pop tailgate. Murdock for president.

dan_marino
dan_marino
10 years ago

I’m also with marino and murdock on this one. murdock for president. go broncos.

d3i0n_$@nd@l$
d3i0n_$@nd@l$
10 years ago

the exact weight hasn’t been verified, but i imagine it’s under 20lbs. -deion

Race Pace
Race Pace
10 years ago

Glad at least some of you liked the pictures of the new Dura Ace electronic group. This new Domane 6 series weighed 14 lb, 14 oz before pedals, it’s a sick bike. Cheers

Robo
Robo
10 years ago

You internet White Knights need to come off it. The point of the pics is to show it off in the best possible light and drive excitement for the product. OF COURSE people are going to pick up on it if the obvious things are missed.

jason
jason
10 years ago

I can live with the chain position and the stem. What I can’t get over is that they left the setup stickers on the FD.

Kingsprinter
Kingsprinter
10 years ago

Cool battery, Ugly a** bike. (Or rather the setup…) Why bother riding a race bike if you’re going to sit like this anyway.

Chris
Chris
10 years ago

One thing to add to this as we just got a Madone with the Dura ace Di2 on it is that the charge cable that the customer gets wih the bike also doubles as the cable that will let you hook the system to your home computer and download the E tube project software to set and adjust the settings of your Di2 (multi shift speed and how many gears it will do 2, 3 or all. Plus do some fine tuning of the front and rear der’s also) It will not let you diagnose a problem you will need the pce1 box for that.

DrSmile
DrSmile
10 years ago

It would look a lot nicer with some Campy carbon cranks… Shimano is going to a carbon spider carrier for it’s cassettes but the crank arms are still alloy? It makes no sense!

David Paly
David Paly
9 years ago

How does the wiring get from the seat post to the derailleurs and how much is the list price for the trek as built?

Steve
Steve
9 years ago

Good looking stuff. Most posers in here babble a good game, that’s it. LOL

David
David
9 years ago

Concerning weight, I received similar bike this week taking the options for lighter handle bars and saddle. Weight without pedals for my bike (58 cm) is 14.75 lbs (6549 gms).

Elliott
Elliott
9 years ago

I hope somebody can clarify something for me. Review states “Note how much smaller the 9070 Di2 is than previous generations – all thanks to smaller motors.” under a picture. I have been told that to date there has been only 1 version/generation of Ultegra Di2 derailleurs (front and back). Please let me know what is accurate. I am going to build a bike with Ultegra Di2 so want to know if I have to worry about which generation I am purchasing if that is an issue. Thanks.

Don
Don
9 years ago

I found this article a while ago just after I ordered a Dura-Ace 9070 group to replace the 7970 kit I have on my 2012 Madone 6.9SSL. I’ll be glad to get the battery out from under the bottom bracket shell and put it inside the seat mast. I received the new kit yesterday and I felt like a little kid on Christmas morning as I opened the box and looked in awe at all the beautiful parts!
However, I was a bit disappointed when I opened up the box for the internal battery and found that it only came with an adapter kit suitable for installing it in a standard 27.2mm diameter seat post and not the fancy adapter that was shown in the pictures that were posted in the article.
Does anyone have any details about the adapter shown in the pictures? Is it available through a Trek Store or is it from another company? If you can help out with a supplier name or part number it would put me one step closer to getting my project underway.

Dom
Dom
9 years ago

Hey Don, Did you fine the adapter for the Madone, as seen in the picture, I also require one of these to fit my 6.9
Cheers

matt
matt
9 years ago

You know Calfee http://calfeedesign.com/ came up with this a few years ago, right?

Katie
8 years ago

I’m in love with my seat post battery! I’m not a Dr. or lawyer, just a serious biker who lives below my means so I can ride what I want. Some of us average “Joes” have biking priorities.

Joshua Clanton
Joshua Clanton
8 years ago

Hello, I have been looking up sources that say that the internal battery is only compatible with specifically designed seatposts. where did these people get those inserts?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.